Zebra HC2X / HC5X Healthcare Accessories Guide

Single-slot charger

SKU#: CRD-HC2L5L-BS1CO

Single-slot charge-only cradle. Charges a single HC2X / HC5X device.

• Charges Standard BLE battery from 0 to 80% in less than 1 hour 20 minutes.
• Compatible with HC2X / HC5X units with Hand Strap or Carrying Clip.
• Sold separately: Single-slot cradle requires power supply SKU# PWR-WUA5V12W0XX (XX of SKU# indicates region) and USB-C cable SKU# CBL-TC5X-USBC2A-01.

Five-slot charger

SKU#: CRD-HC2L5L-BS5CO

• Will charge up to five HC2X / HC5X devices.
• Charges Standard BLE battery from 0 to 80% in less than 1 hour 20 minutes.
• Compatible with HC2X / HC5X units with Hand Strap or Carrying Clip.
• Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and country-specific AC line cord.

Single-slot charger plus battery

SKU#: CRD-HC2L5L-2S1D1B

Single-slot device plus battery charger. Charges a single device and one HC2X/HC5X spare battery.

• Charges Standard BLE battery in device from 0 to 80% in less than 1 hour 20 minutes.
• Charges Standard BLE spare battery from 0-90% in less than 4 hours.
• Compatible with HC2X / HC5X units with Hand Strap or Carrying Clip.
• Sold separately: Power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC line cord.

Device cradle cup replacement kit

SKU#: CRDCUP-HC2L5L-01 | SKU#: CRDCUP-HC2L5L-05

Kit allows the conversion of previous generation devices' 5-Slot or 1-Slot Charge-Only ShareCradles purchased after 2019 to support HC2X / HC5X.

• Only compatible with cradles that use ShareCradle design.
• SKU# CRDCUP-HC2L5L-05 includes five HC2X / HC5X ShareCradle cups.
• SKU# CRDCUP-HC2L5L-01 includes one HC2X / HC5X ShareCradle cup.
• Not all five cups need to be used, therefore creating a multi-slot cradle supporting a combination of devices (e.g., two HC2X / HC5X and three TC5X HC devices).

Rack mounting for space optimization

Optimize available space by mounting any set of five-slot chargers for HC2X / HC5X on a standard, 19-inch server rack.

• Ideal for customers that have several devices per location.
• Compatible with all five-slot chargers for HC2X / HC5X.

Mounting bracket

SKU#: BRKT-SCRD-SMRK-01

Use five-slot ShareCradle mounting bracket to attach five-slot TC22 / TC27 cradles to the wall or mount on a 19-inch server rack.

• Offers cable routing slots and removable tray that stores / conceals power supply.
• Adjustable orientations: 25º angle for high-density (five-slot chargers), Horizontal (single-slot or four-slot spare Li-ion charger).

Bluetooth BLE PowerPrecision Li-ion Battery

SKU#: BTRY-HC2L5L-2XMAXB

• HC2X / HC5X Healthcare PowerPrecision Li-ion Battery — 3800 mAh
• PowerPrecision Li-on battery with BLE beacon (Blue)
• Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.
• BLE beacon allows device with this battery to be located even if powered off using Zebra Device Tracker.
• Sold separately: Zebra Device Tracker licenses for either 1-year SKU# SW-BLE-DT-SP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR.

Battery Charger

SKU#: SAC-HC2L5L-4SCHG

• HC2X/HC5X White spare battery charger to charge four Li-ion batteries.
• Standard BLE batteries will charge from 0–90% in less than 4 hours.
• Can be used standalone or up to 4 chargers can be mounted on Mounting Bracket SKU# BRKT-SCRD-SMRK-01.
• Sold separately: Power Supply SKU# PWR-BGA12V50W0WW, DC Cable SKU# CBL-DC-388A1-01, and Country-specific AC Line cord.

Battery charger replacement kit

SKU#: BTRCUP-HC2L5L-01

• 4-slot battery charger replacement cup to enable charging of HC2X/HC5X batteries
• Used to replace a legacy TC21 / TC26 or TC5x HC series 4-slot Battery Charger on single-slot or multi-slot ShareCradle base when migrating from TC21 / TC26 or TC5x HC to HC2X/HC5X.
• No more than one cup shall be installed on a multi-slot ShareCradle base when converting with this 4-slot Battery Charger cup.
• Should replace the TC21 / TC26 HC toaster cup in the same location on the ShareCradle base, usually the left-most slot when facing the cradle.

Mounting Bracket for Battery Chargers

SKU#: BRKT-SCRD-SMRK-01

• Four 4-slot spare battery chargers can be mounted as shown with mounting bracket.
• Use to mount to wall or with standard 19-inch server rack for more density and save space.

Intelligent Cabinets

Easily secure, store, charge and handle checkout for Zebra mobile devices.

• Five cabinet sizes to accommodate between 20 and 100 devices
• Enhanced security options
• All-inclusive design includes built-in power supply
• Open leaf design for passive cooling through natural air flow
• *Intelligent Cabinets are not be available in all regions.

Cradle Locks

Easily add a layer of physical security in Intelligent Cabinets and racks with Zebra’s cradle locks. Available for Zebra’s HC2x, HC5x TC2x, TC5x and TC7x mobile computers, these mechanical locks physically prevent the removal of devices by any unauthorized personnel, increasing device security and reducing the number of lost or stolen devices.

• Mechanical locking for security and accountability
• Compatible with Zebra’s Intelligent Racks and Cabinets.
• Battery charge status

Open Racks

Traditional open racks offer a durable industrial design

• A choice of single- or double-sided rack to meet capacity needs
• A choice of wheels to easily move the racks or feet to create stationary racks
• Offers integrated security options including cradle locks with PIN access

Rotatable Carrying Clip

SKU#: SG-HC2L5L-CLIP-01

Healthcare Carrying Clip – Blue

• Used with HC2X / HC5X devices to allow user to conveniently attach the device to healthcare clothing.
• Clip attaches to the top of HC2X / HC5X. Has Healthcare blue disinfectant ready housing.
• Adjustable clip that can rotate 162° for different use cases.
• Not compatible with hand strap SKU# SG-HC2L5L-HSTRP-01.

Healthcare Hand Strap

SKU#: SG-HC2L5L-HSTRP-01

Healthcare Hand Strap – Blue

• Used with HC2X / HC5X devices.
• Top of strap attaches to include cap which clips onto top of device. Bottom of strap clips onto bottom of device.
• Strap provides access to duress button on the back of the device.
• Compatible with charging cradles for HC2X / HC5X.
• Remove bottom clip first and then the top cap to access or remove battery.

Healthcare USB-C Plug

SKU#: SG-HC2L5L-USBCADP5

Healthcare USB-C Plug – Blue

• Replacement USB-C plug that covers the bottom of HC2X / HC5X devices.
• Comes in a pack of 5. One plug should be included with each device.

Connect Cradles

SKU#: CRD-TC2L-1SNWS-01

Workstation

• This connect cradle, allows users to use HC2X and HC5X device as a workstation or kiosk. Includes HDMI, Ethernet, USB-A (x4) ports, shims, and 3.5mm headset jack. Power supply, DC line cord and AC line cord are all sold separately.

Power Supply & DC Line Cord

SKU#: PWR-BGA12V50W0WW | SKU#: CBL-DC-388A2-01

• Power Supply PWR-BGA12V50W0WW for workstation connect cradle: 100-240 VAC, 12VDC, 4.16A.
• DC Line Cord CBL-DC-388A2-01 to be with used with the above power supply for Workstation connect cradle
• Country-specific AC line cord is required (Listed here).