LEDVANCE ORBIS Mirror
Product Information and Installation Guide
Product Overview
The LEDVANCE ORBIS Mirror is a versatile lighting fixture designed for various applications, offering adjustable color temperature (CCT) and dimming functionality. Available in 40cm and 60cm sizes, and multiple finishes (CH, BK, WT, WD).
Brand: LEDVANCE
Specifications
General Specifications
| Model | EAN | W (Wattage) | Im (Lumen Output) | K (Color Temperature) | (°C) Ambient Temp. | V~ (Voltage) | mA (Current) | Hz (Frequency) | DF (Beam Angle) | (°) (Beam Angle) | L (Length) mm | W (Width) mm | H (Height) mm | Weight | LED Type | Energy Efficiency Class |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ORBIS MIRROR 40CM CLICKCCTDIMIP44CH | 4099854279157 | 6.8 | 650 | 3000/4000K | -20...+40 | 220-240 | 58 | 50/60 | >0.5 | 120 | 400 | 88 | 57 | 350 g | AC60811 | E |
| ORBIS MIRROR 40CM CLICKCCTDIMIP44BK | 4099854279171 | 6.8 | 650 | 3000/4000K | -20...+40 | 220-240 | 58 | 50/60 | >0.5 | 120 | 400 | 88 | 57 | 350 g | AC60811 | E |
| ORBIS MIRROR 40CM CLICKCCTDIMIP44WT | 4099854279195 | 6.8 | 650 | 3000/4000K | -20...+40 | 220-240 | 58 | 50/60 | >0.5 | 120 | 400 | 88 | 57 | 350 g | AC60811 | E |
| ORBIS MIRROR 40CM CLICKCCTDIMIP44WD | 4099854279218 | 6.8 | 650 | 3000/4000K | -20...+40 | 220-240 | 58 | 50/60 | >0.5 | 120 | 400 | 88 | 57 | 350 g | AC60811 | E |
| ORBIS MIRROR 60CM CLICKCCTDIMIP44CH | 4099854279232 | 10 | 950 | 3000/4000K | -20...+40 | 220-240 | 78 | 50/60 | >0.5 | 120 | 600 | 88 | 57 | 400 g | AC60812 | E |
| ORBIS MIRROR 60CM CLICKCCTDIMIP44BK | 4099854279256 | 10 | 950 | 3000/4000K | -20...+40 | 220-240 | 78 | 50/60 | >0.5 | 120 | 600 | 88 | 57 | 400 g | AC60812 | E |
| ORBIS MIRROR 60CM CLICKCCTDIMIP44WT | 4099854279270 | 10 | 950 | 3000/4000K | -20...+40 | 220-240 | 78 | 50/60 | >0.5 | 120 | 600 | 88 | 57 | 400 g | AC60812 | E |
| ORBIS MIRROR 60CM CLICKCCTDIMIP44WD | 4099854279294 | 10 | 950 | 3000/4000K | -20...+40 | 220-240 | 78 | 50/60 | >0.5 | 120 | 600 | 88 | 57 | 400 g | AC60812 | E |
Note on Energy Efficiency: This product contains a light source of energy efficiency class E.
Ingress Protection: IP44 rated.
Power: 230V.
Installation Instructions
⚠️ Important Safety Information: Always ensure the power supply is switched OFF before commencing installation.
Step 1: Prepare Power Supply
Ensure the main power switch is turned OFF. This step illustrates operating a standard light switch panel.
Step 2: Mount the Fixture Bracket
The ORBIS MIRROR requires a wall bracket for mounting. [Diagram: Shows a wall bracket being attached to a wall using screws and wall plugs. A drill with a 6mm bit is indicated for creating pilot holes.] Ensure the bracket is securely fastened to the wall.
Step 3: Connect Electrical Wiring
[Diagram: Shows the internal wiring compartment of the fixture. Wires are connected to terminals labeled L (Line), N (Neutral), and E (Earth/Ground). Instructions detail wire stripping to 10mm, with a total length of 35mm, and recommend a wire cross-sectional area of 0.75-1.5mm².] Follow the wiring diagram carefully. Connect the mains supply wires to the corresponding terminals within the fixture. [Diagram: Close-up sequence showing wires being inserted into terminals and securing them.]
Step 4: Attach the Fixture
[Diagram: Shows the ORBIS MIRROR fixture being attached to the mounted wall bracket. Arrows indicate the fixture sliding or clipping into place.] Secure the fixture onto the installed bracket. [Diagram: Shows a screwdriver being used to fasten the fixture cover or housing.]
Step 5: Drain Hole Orientation
[Diagram: Shows the installed ORBIS MIRROR fixture.] Important: The drain hole of the product must be oriented downwards when installing. [Text: "The drain hole of product must be downward when installing.***"]
Operation and Features
Touch Control
The ORBIS MIRROR features intuitive touch controls:
- Color Temperature (CCT) Adjustment: A single, short touch (1x) cycles between 3000K (warm white) and 4000K (cool white).
- Dimming: A long touch (greater than 3 seconds) activates dimming, allowing adjustment from 10% to 100% brightness.
- On/Off: The fixture can be turned ON or OFF via touch control.
Reference Control Setting: 3000K
[Diagram: Illustrates the touch control interface with icons for ON/OFF, CCT selection (3000K/4000K), and dimming (10%-100%).]
Product Markings and Compliance
The product is marked with:
- CE, UKCA, EAC compliance logos.
- LED indicator.
- IP44 rating.
- Recycling instructions: "This appliance and its accessories are recyclable." Instructions for disposal in stores or recycling centers are provided, with a link to collection point information: www.quefairedemesdechets.fr.
