ANDERIC RRU401.7 | 4-Device Universal Remote Instructions Guide

Introduction and Support

For additional help, please contact Anderic.com. You can download a PDF version of this manual at Anderic.com/rru401. It is recommended to bookmark this URL for quick access on mobile devices.

A QR code is present in the original document, linking to the same URL.

Installing the Batteries, Screw, and Cable Attachment

This section describes how to install batteries, the battery cover, and a screw (sold separately). The process involves:

• Opening the battery compartment on the remote.
• Inserting the batteries (typically AAA).
• Securing the battery cover.
• Attaching any necessary screws or cable attachments as required.

A diagram in the original document illustrates this process, showing the remote, batteries, cover, and screw.

Programming Methods

Code List

This section provides a comprehensive list of codes for various brands and device types. The full list is extensive and spans multiple pages in the original document.

Primary Code Table (DIGIT, TV, DVD/VCR, AUDIO, CABLE/STB)

Extensive code lists for Roku Enhanced TV, TV, and other categories are provided in the original document, containing hundreds of brand codes and associated numbers.

Code Display

Use this method to display the code that is currently programmed.

1. Press and release the mode key for the device you want to check (e.g., TV).
2. Press key "[MENU]" and "[1]". The number of flashes of the mode key indicates the first digit of the code.
3. Press key "[MENU]" and "[2]". The number of flashes indicates the second digit.
4. Press key "[MENU]" and "[3]". The number of flashes indicates the third digit.
5. Press key "[MENU]" and "[4]". The number of flashes indicates the fourth digit.

NOTE: If the current digit is 0, the mode key will not flash.

Multi-mode Combine Power

This feature allows powering on/off multiple devices with a single press of the [POWER] button.

Enable - Multi-mode Combine Power

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 0". The mode key remains lit.
3. Press all mode keys (i.e., TV, STB, DVD) for the devices you wish to enable multi-mode combine power for.
4. Press the [POWER] key to save and exit.

Disable - Multi-mode Combine

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 0". The mode key remains lit.
3. Press the [POWER] key to save and exit. The mode key blinks twice and then turns off.

Device Mode Lock

This feature locks a device mode to prevent reprogramming. It serves as a safety feature against accidental programming. Device lock must be disabled before a mode can be reprogrammed.

1. Press and hold the mode key (e.g., STB) you wish to enable/disable device mode lock for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 1".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Channel Punch-through

When enabled, all channel keys (0-9, [-], [RECALL], [CC], [SAP], [CH +]&[CH -]) will always send the code assigned to the current mode, regardless of the remote's current mode.

Example: If channel punch-through is programmed for STB mode, pressing a channel key while the remote is in TV mode will send the STB code instead of the TV code.

1. Press and hold the mode key (e.g., STB) you wish to enable/disable channel punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 2".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Volume Punch-through

When enabled, all volume keys ([MUTE], [VOL+]&[VOL-]) will always send the code of the current mode, regardless of the remote's current mode.

1. Press and hold the mode key (e.g., TV) you wish to enable/disable volume punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 3".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Media Punch-through

When enabled, all media keys ([STOP], [RECORD], [<<], [|<<], [PAUSE], [>>|], [>>], [PLAY]) will always send the code of the assigned mode, regardless of the remote's current mode.

1. Press and hold the mode key (e.g., DVD) you wish to enable/disable media punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 8 4".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Roku® Punch-through (+ D-Pad)

When enabled, all Roku-related keys ([EXIT] ?, [<<], [PLAY], [PAUSE], [>>], [INFO](*), [HOME], [REPLAY], [NETFLIX], [UP], [DOWN], [LEFT], [RIGHT]&[OK]) will always send the code of the assigned mode, regardless of the remote's current mode.

1. Press and hold the mode key (e.g., STB) you wish to enable/disable Roku punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 7 0".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Roku Punch-through (NO D-Pad)

When enabled, all Roku-related keys ([EXIT] ?, [<<], [PLAY], [PAUSE], [>>], [INFO](*), [HOME], [REPLAY], [NETFLIX]) will always send the code of the assigned mode, regardless of the remote's current mode.

1. Press and hold the mode key (e.g., TV) you wish to enable/disable Roku punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 7 1".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

All-Key Punch-through

When enabled, all keys will always send the code of the assigned mode, regardless of the remote's current mode. Note: All-Key Punch-through has the lowest priority amongst all punch-through types. Other punch-through modes may work alongside and have higher priority.

1. Press and hold the mode key (e.g., TV) you wish to enable/disable all-key punch-through for, for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 7 3".
   • If enabled: The mode light goes out directly.
   • If disabled: The mode light blinks two times.

Individual Key Punch-through

This allows individually assigning keys to "punch-through" to a chosen mode. Once enabled, the key will always send the code to the assigned device, regardless of the remote's current mode. Individual Key Punch-through has the highest priority amongst all punch-through types.

Enable - Individual Key Punch-through

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its lights remain on, then release the key.
2. Input code "9 8".
3. Press the corresponding key you wish to enable punch-through for.
4. Press the mode key you want to assign it to (e.g., TV, STB, AUX). The mode light goes out directly.

Note: To re-assign a key to a different mode, repeat steps 1-4.

Disable - Individual Key Punch-through

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its lights remain on, then release the key.
2. Input code "9 0 0".
3. Press the key you want to disable the punch-through for. The mode light blinks two times to confirm.

Learning Function

This function allows programming individual keys using codes from an existing remote.

1. Press and hold the mode key (e.g., TV) you wish to program for about 3 seconds until its light remains on, then release the mode key.
2. Press and release the [MENU] key. The mode key blinks slowly, indicating the remote is in learning mode.
3. Press and release the key you want to be learned. The mode light now remains on.
4. Align both remotes, pointing them at each other, approximately 2 inches apart with IR LEDs directly aligned.
5. Press and hold the corresponding key on the target remote control until the mode light blinks three times, then flashes slowly, indicating successful learning. Proceed to step 6.
6. If unsuccessful: The mode light flashes two times quickly and exits learning mode. This may indicate insufficient memory space; delete some learned keys and start over from step 1.
7. Repeat steps 3-5 to learn all necessary keys. The mode light will blink slowly.
8. Press the mode key (e.g., TV) to save and exit.

Delete Learned Keys

Delete individual learned key

1. Press and hold the mode key (e.g., TV) you wish to program for about 3 seconds until its light remains on, then release the mode key.
2. Press and release the [MENU] key. The mode key blinks slowly, indicating the remote is in learning mode.
3. Press and hold the key you want to delete the learned code from.
   • If successful: The mode light blinks three times, the remote saves and exits.
   • If unsuccessful: The mode light flashes two times and exits.
4. Repeat steps 1-3 to delete other learned keys.

Delete all learned keys from a single device

1. Press and hold the mode key (e.g., TV) you wish to program for about 3 seconds until its light remains on, then release the mode key.
2. Press and release the [MENU] key. The mode key blinks slowly, indicating the remote is in learning mode.
3. Press and hold the mode key you want to delete all learned keys from (e.g., TV) until the mode light blinks three times and exits.

Delete all learned keys from all devices

1. Press and hold the mode key (e.g., TV) you wish to program for about 3 seconds until its light remains on, then release the mode key.
2. Input code "9 9 8 8". The mode light blinks two times slowly to confirm and exits.

Macro Function

Macros allow multiple key presses to be transmitted with a single dedicated key press. For example, a single press of an assigned key could power on a TV, change input, increase volume, power on a cable box, and input channel 530.

Setting a Macro Key while in a specific Mode only (Fixed Device)

This setting assigns a macro key to be used only within a designated mode. Example: If the "FAV" key is assigned to "TV" mode for macros, it will function normally in other modes (STB, DVD, AUDIO) but will only send the assigned macro when the remote is in "TV" mode and the "FAV" key is pressed.

1. Press and hold the mode key (e.g., TV) you wish to program for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 5".
3. Press the key to assign the macro function to. The LED flashes once and remains on.
4. Press the mode key (e.g., TV), then press the keys in the desired order for the macro sequence. If you need to change modes during the sequence, press the corresponding mode key (e.g., DVD) in sequence, then continue with the remaining keys.
5. When complete, press and hold any mode key (e.g., TV) for about 3 seconds to save and exit.

Setting a Macro Key that works while in any mode (Non-fixed device)

This setting allows the macro key function to be sent regardless of the remote's current mode (TV, DVD, STB, AUDIO).

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its lights remain on, then release the mode key.
2. Input code "9 9 6".
3. Press the key to assign the macro function to. The LED flashes once and remains on.
4. Press the mode key (e.g., TV), then press the keys in the desired order for the macro sequence. If you need to change modes during the sequence, press the corresponding mode key (e.g., DVD) in sequence, then continue with the remaining keys.
5. When complete, press and hold any mode key (e.g., TV) for about 3 seconds to save and exit.

Example: Assigning the "FAV" key to Power on TV, Change input, Increase volume by 1, Power on Cable Box, Input channel 530. Press the following keys in sequence:

Hold [TV] for 3 seconds, [9], [9], [6], [FAV], [TV], [POWER], [INPUT], [VOL +], [CBL], [POWER], [5], [3], [0] & finally, press and hold [TV] for 3 seconds to save.

Delete programmed macro key: Simply skip step 4 from the above procedure.

Macro functionality notes:

• This remote allows up to 5 keys having macro functionality.
• This remote can program a maximum of 15 steps per each macro.
• If programming a macro over a previously assigned macro, it will replace it.

Backlight Adjustments

Toggle backlighting on/off

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its light remains on, then release the mode key.
2. Input code "9 9 8 5".

Toggle backlighting length of time: 3 - 10 seconds

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its light remains on, then release the mode key.
2. Input code "9 9 8 6".

Toggle backlighting brightness: 100/75/50/25%

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its light remains on, then release the mode key.
2. Input code "9 9 8 7".

Reset to Factory Default Status

1. Press and hold any mode key (e.g., TV) for about 3 seconds until its light remains on, then release the mode key.
2. Input code "9 9 9 9". All mode lights will light and stay lit for about 3 seconds, then go out to confirm a successful reset.