RR1002 User Manual

Program - Code Input Method

1. Turn on TV manually.
2. Press and hold [SET] and [POWER] keys simultaneously for 3 seconds, the indicator light shall remain on; then release the keys.
3. Enter the 4-digit code of your brand TV from the code list at end of this manual. After a valid code entry, the indicator turns off. For an invalid code, the indicator flashes 4 times quickly and exits setup mode.

NOTE: After entering code setup mode, if without pressing any button for 10 seconds, the remote shall quit the setup mode.

Program – Shortcut Key Method

1. Turn on TV manually.
2. Press and hold [SET] and the respective TV brand key from chart below. (0-9, +100, MUTE) simultaneously and continue to hold keys until TV is powered off; the indicator light shall remain on for the duration;

Now the remote is automatically searching the code of that TV brand. If the TV is controlled (by powering on or turning off), release the buttons to save the code and quit programming.

Shortcut Key - Brand Chart

Program – Manual Code Search

1. Turn on TV.
2. Press and hold [SET] key, then long press [CH+] key for about 5 seconds until indicator light remains on. Release the keys.
3. Press and release the key [CH+] or [CH-] , with each press code will change. If long press [CH+] or [CH-] key code it will change faster. When the channel changes, please press the [SET] key quickly to save the code.

NOTE: Pressing [CH+] scrolls forward, while [CH-] scrolls backward through code database. During setting process, if no key is pressed in 10 seconds the setting will be exited automatically.

Learning function

1. Press and hold the [SET] key, then simultaneously long press [VOL+] key for about 5 seconds; the indicator light will light and remain on. Release the two keys. Remote is now in learning mode.
2. Point the original remote toward the RR1001. The distance should be within 1-3 cm and eyes of remotes must directly align.
3. Press the key you want to learn from original remote control (the LED of RR1001 will keep flashing), then press any key of RR1001 to which you want to assign the code to. The indicator light will remain on.
4. Repeat from Step 2 to continue learning other keys.
5. When all keys have learned. Press and hold [SET] key, then simultaneously press [VOL-], the indicator light will go out. The learning will be saved and exited.

NOTE: During the learning process, if no key is pressed in 25 seconds the learning state will be exited without saving.

Code Identification

1. Press and hold [SET] and [POWER] keys simultaneously for 3 seconds the indicator light shall remain on; then release the keys.
2. Input [9] [9] [0] with number keys. The indicator light will flash twice and turn off.
3. Press key [1], count number of indicator light flashes and write down.
4. Press key [2], count number of indicator light flashes and write down.
5. Press key [3], count number of indicator light flashes and write down.
6. Press key [4], count number of indicator light flashes and write down.

NOTE: If code number is 0. The indicator light will not flash.

Factory Reset

Press and hold [SET] and [POWER] keys simultaneously for 3 seconds; the indicator light shall remain on; then release keys.

Press the [CC] key and the light shall flash 3 times. Remote has now been reset to factory settings.

NOTE: If remote is reset to factory settings, the factory code can control 95% of most popular TVs.

Setting the Sleep Timer

NOTE: The SLEEP button operates the Sleep function of your TV providing it supports the Sleep function. Alternatively, you can enable the remote to turn off your TV after a period of 1 to 99 minutes with the instructions provided in this section. This feature works even if your TV does not have its own Sleep function.

• First, make sure you have the remote programmed to your TV using one of the above programming methods.
• After successfully programming your remote, try pressing SLEEP button first and make sure on screen sleep option DOES NOT appear before continuing. If it does appear then you do not have to continue with the following steps.

1. Press and hold [SLEEP] key until the indicator light blinks and remains on. Then release the key.
2. Using the numerical pad, press numbers 01 - 99 depending on the number of minutes you would like before the TV turns off (Example: If you press 01 the TV will turn off in 1 minute). Then indicator light will turn off. TV Sleep Timer is now set.
3. Leave the remote pointing towards the TV with an unobstructed path.

NOTE: To cancel the sleep function, press and hold [SLEEP] or [POWER] key for 3 seconds. Pressing any other additional buttons on the remote will not cancel the sleep timer.

Setup Lock

1. Press and hold [SET] and [POWER] keys simultaneously for 3 seconds; the indicator light will remain on; then release the keys.
2. Input code using keys [9] [9] [6] [6]; the indicator light shall flash five times. The remote is locked and it cannot be programmed in any way unless these steps are repeated.

NOTE: to unlock the remote, repeat the above steps.

Additional Notes: When changing the batteries, this unit will retain the programmed codes.

TV Code List

TV including LCD, Plasma, & Panel