FLOOR LIGHT - USER MANUAL

The Optonica floor light offers versatile lighting control through a mobile app and remote control, featuring customizable colors, brightness, and dynamic modes, including music synchronization.

The product is designed for easy installation and energy efficiency.

Features

• • Mobile phone Bluetooth APP control
• • Remote controller control
• • Multiple color variations
• • Multiple mode changes
• • High efficiency, energy saving, environmental protection
• • Easy to install and widely used

Technical Parameters

Instructions

1. Assemble the floor ambient lamp kit into finished lamps according to the instruction manual, then test it after power connected.
2. Use the remote controller to control a variety of RGB color static changes.
3. The brightness can be adjusted by independent control of the remote.
4. The static changes of various RGB colors can be controlled through the mobile APP.
5. Use the mobile App to switch the magic mode, music mode, and adjust the brightness.

Installation Instructions

The following steps detail the assembly process for the floor light:

1. Insert the Aluminum profile into the connector to connect and fix it.
2. Open the 2pcs square tube base and position it perpendicular to the lamp body.
3. Insert the 2 pcs hand screws into the screw holes on the square tube base respectively, and fasten clockwise to fix the square tube base.
4. Insert the DC to USB male connector into the DC female connector on the controller.
5. Insert the DC to USB male cable into the USB DC5V 2A adapter (or insert it into a USB port supporting 5V 2A).
6. Connect to power and test the unit.

Diagram Descriptions for Installation:

• The assembly process is illustrated with line drawings showing: inserting the aluminum profile, opening the square tube base, securing the base with hand screws, connecting the DC to USB male connector to the controller, connecting the USB cable to a power adapter, and finally connecting to power.

Product Size Chart

The dimensions of the Optonica floor light are as follows:

• Overall Height: 1047mm (41.2 inches)
• Base Dimensions: 260mm (10.2 inches) by 260mm (10.2 inches)
• Pole Diameter: Ø30mm (1.18 inches)
• Base Connector Diameter: Ø33mm (1.3 inches)
• Additional Base Component: 20mm (0.79 inches)

Operation Instruction

The floor light allows for quick control of color, brightness, and color temperature via the mobile phone APP and remote controller. It supports various flashing modes and music synchronization. To operate, ensure the light is powered, open the 'Magic Lantern' app on your phone, and connect via Bluetooth for settings and control.

1. Adjust the color and brightness from 60,000 available colors.
2. When music is played on a mobile phone or music device, the LED lights will change color and brightness according to the music's rhythm.
3. A variety of built-in color change modes are available and can operate automatically even after disconnecting from the mobile phone.

APP Control Guide

Note: Requires Android 4.3 and iOS 8.0 system.

Download the app from the App Store or Google Play. If unavailable, scan the provided QR codes to access the app. The app is named 'Magic Lantern' and features a lotus flower icon.

Lamp-APP Pair:

1. Click the 'Magic Lantern' app icon to enter the app page.
2. If Bluetooth is not enabled, a prompt will appear asking to open Bluetooth; click [Allow].
3. Click the device list to view and connect to the device (it automatically connects after searching).

The app interface allows for device management, connection status monitoring, and detailed settings for color, brightness, and modes.

Remote Control Manual

The remote control provides comprehensive functionality:

• [Play/Pause]: Controls playback or pauses modes.
• [AUTO]: Activates automatic modes, cycling through 21 default dynamic mode loops.
• [Power ON/OFF]: Turns the light on or off.
• [Mode+] / [Mode-]: Adjusts speed or sensitivity for dynamic modes.
• [Brightness+] / [Brightness-]: Increases or decreases brightness.
• Color Buttons: [Red], [Green], [Blue], [Yellow], [Cyan], [Purple] for selecting static colors.
• Timer Buttons: [1 Hour Timer] and [2 Hour Timer] for setting automatic turn-off timers. The [W] button likely controls white light.
• Mode Selection: Buttons like [Energy 1/2], [Rhythm 1/2], [Roll 1/2] select different dynamic lighting effects.
• Preset Effects: Buttons for specific effects such as [Snowflake 23], [Romantic 9], [Star 8].

Notes

1. The supply voltage for this product is 5V; it is forbidden to connect to other voltages.

2. The leading wire shall be correctly connected according to the color and label provided in the wiring diagram.

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;