Xiaomi Mi AirDots Pro Wireless Earbuds

Product Description

The Mi AirDots Pro are wireless earbuds designed for a seamless audio experience.

Charging Case Components:

• Charging Case: Houses and charges the earbuds.
• LED Indicator (Case): ? Shows charging status.
• Pairing Button: ? Used for pairing and reset functions.
• Charging Port: ? USB Type-C port for charging the case.

Earbud Components:

• Earbud: ? The primary audio device.
• LED Indicator (Earbud): ? Shows power and charging status.
• Silicone Tips: ? Provide a comfortable and secure fit.
• Microphone for Ambient Noise Cancellation: ? Enhances call clarity by reducing background noise.
• Handsfree Microphone: ? For voice calls.

Package Contents

• Charging Case
• Earbuds (Left and Right)
• Silicone Tips (3 pairs)
• User Manual
• USB Type-C Charging Cable

Specifications

Product Usage

Charging

Charging Earbuds: Place the earbuds into the charging case. They will begin charging automatically.

Charging the Case: Connect the charging case to a power source using the USB Type-C port located at the bottom. A slowly blinking LED ? on the case indicates it is charging. A solid LED ? indicates the case is fully charged.

Note: The earbuds are powered off upon unboxing. Place them in the charging case and press the side button to activate them. It is recommended to fully charge both the earbuds and the case before first use.

Turning On

Open the charging case doors. The earbuds will turn on automatically.

Connection

Connecting a New Device

1. Place both earbuds into the charging case. Press and hold the function button on the case for 2 seconds. The case LED ? will start blinking, indicating the earbuds are ready for pairing.
2. Enable Bluetooth ? on your device and search for "Mi True Wireless Earphones". Connect to it. If prompted for a PIN, enter "0000".

Connecting Two Devices (Independent Pairing)

1. Place only one earbud into the charging case. Press and hold the function button for 2 seconds. On your first device, search for the earbud in Bluetooth settings and pair it.
2. Remove that earbud from the case and place the second earbud into the case. Press and hold the function button for 2 seconds. On your second device, search for the earbud and pair it.

This allows each earbud to be connected independently to a different device.

Note: Before attempting to pair with two devices, reset the earbuds to factory settings to clear all previous pairings.

Connection Loss

If Bluetooth ? is turned off on your device, or if you move out of wireless range, the earbuds will automatically enter standby mode. If a connection is not re-established within 10 minutes, the earbuds will go into a sleep state. Simply remove them from your ears and reinsert them to return to standby mode.

Reconnecting

Open the charging case (with earbuds inside). The earbuds will automatically connect to the previously paired device. If no previous connection is stored (e.g., after a reset) or the last connected device is out of range, the earbuds will enter standby mode.

Clearing Connection History (Factory Reset)

1. Place both earbuds into the charging case.
2. Press and hold the function button on the side of the case for more than 10 seconds. Release the button once the LED ? remains solid.
3. The earbuds will reset, clearing all pairing history, and will enter pairing mode.

Functions

Each earbud features a touch-sensitive panel (round area with a silver frame) for controlling various functions.

Incoming Calls

Double-tap either earbud to answer or end a call. ?

Music Playback

• With both earbuds: Double-tap the right earbud for play/pause music ▶️/⏸️. Double-tap the left earbud to activate the voice assistant (Google Assistant / Siri, depending on your connected phone).
• With one earbud: Double-tap the earbud for play/pause music ▶️/⏸️.

Note: Voice assistant functionality requires direct support from the connected device and enabled voice assistant settings.

Song Switching

Currently, song switching is not supported via the earbud touch panels. Songs can be switched using a connected Xiaomi smartwatch.

Active Noise Cancellation (ANC)

While wearing the earbuds, tap and hold the touch panel with your finger for 3 seconds (on either side) to toggle ANC on/off. You will hear an audio confirmation. ??

Note: Active Noise Cancellation is not available during calls.

Declaration of Conformity

Xiaomi declares that the radio equipment "Mi True Wireless Earphones" is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: https://www.mi.com/en/service/support/declaration.html

Importer: PRG Trading Group s.r.o., Dejvická 77, 160 00 Praha 6, Czech Republic.

For returns, warranty claims, or technical support, please contact info@xiaomi-store.cz.

© 2019 PRG Trading Group s.r.o. All rights reserved.