Bath Wall Cabinet Assembly Instructions
Model: GYM01992
This document provides step-by-step instructions for assembling your Bath Wall Cabinet.
Product Overview
This manual guides you through the assembly of the Bath Wall Cabinet. Please read all instructions carefully before beginning.
The cabinet features a door with a decorative lightning bolt symbol and multiple shelves.
Hardware List
| Item | Description | Quantity (Initial List) | Quantity (Used in Steps) |
|---|---|---|---|
| A | 3.5*40mm screw [screw] | x2 | x2 (Step 9) |
| B | 3*14mm screw [screw] | x2 | x2 (Step 2), x2 (Step 9) = x4 |
| C | 6*30mm screw [screw] | x40 | x4 (Step 3) + x6 (Step 4) + x6 (Step 5) + x8 (Step 6) + x8 (Step 7) = x32 |
| D | 3*12mm screw [screw] | x9 | x5 (Step 1) + x4 (Step 8) = x9 |
| E | Cam lock [cam lock] | x2 | x2 (Step 2) |
| F | Dowel [dowel] | x1 | x1 (Step 2) |
| G | Small screw [screw] | x1 | x1 (Step 1) |
| H | Metal bracket [bracket] | x22 | x2 (Step 1) + x2 (Step 8) = x4 |
| I | Hinge [hinge] | x1 | x1 (Step 8) |
| J | Door handle [handle] | x1 | x1 (Step 8) |
| K | Screw [screw] | x22 | x2 (Step 3) + x5 (Step 4) + x4 (Step 6) + x4 (Step 7) = x15 |
| L | Shelf pin [shelf pin] | x12 | Not used in assembly steps shown |
Note: Quantities in the 'Used in Steps' column reflect direct usage shown in the assembly diagrams. The 'Initial List' quantities may include spares or be for a different configuration.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Top panel | x1 |
| 2 | Left side panel | x1 |
| 3 | Shelf support (vertical) | x1 |
| 4 | Bottom panel | x1 |
| 5 | Right side panel | x1 |
| 6 | Shelf | x4 |
| 7 | Back panel | x1 |
| 8 | Horizontal support bar | x1 |
| 9 | Cabinet door | x1 |
| 10 | Shelf support (vertical) | x2 |
Assembly Steps
Step 1
Attach the back panel (7) to the bottom panel (4) and top panel (1). Align the pre-drilled holes. Secure using hardware D (3*12mm screws) and H (metal brackets). Place brackets on the back panel and screw them into the top and bottom panels using screws D.
Hardware used: D (x5), H (x2), G (x1)
Parts used: 1, 4, 7
Step 2
Prepare the side panels (2, 5) and shelves (6). Insert dowels (F) into the designated holes on the side panels. Attach shelves (6) to the side panels (2, 5) using cam locks (E) and screws (B - 3*14mm). Insert cam locks into the shelves and screw them into the side panels.
Hardware used: B (x2), E (x2), F (x1)
Parts used: 2, 5, 6 (x2)
Step 3
Attach the assembled side panel and shelf structure to the bottom panel (4). Align the holes and secure using screws C (6*30mm) and K (screws).
Hardware used: C (x4), K (x2)
Parts used: 3, 4, 5, 6
Step 4
Attach the other side panel (2) and its shelves (6) to the bottom panel (4) and the first side panel (5). Align the holes and secure using screws C (6*30mm) and K (screws).
Hardware used: C (x6), K (x5)
Parts used: 2, 5, 6 (x2)
Step 5
Attach the horizontal support bar (8) to the inner sides of the side panels (2, 5). Align the holes and secure using screws C (6*30mm).
Hardware used: C (x6)
Parts used: 2, 5, 8
Step 6
Attach the top panel (1) to the assembled cabinet structure. Align the holes on the top panel with the side panels (2, 5) and shelf supports (3, 10). Secure using screws C (6*30mm) and K (screws).
Hardware used: C (x8), K (x4)
Parts used: 1, 2, 3, 5, 10
Step 7
Attach the back panel (9) to the rear of the assembled cabinet. Align the holes and secure using screws C (6*30mm) and K (screws).
Hardware used: C (x8), K (x4)
Parts used: 9
Step 8
Install the cabinet door (9). Attach the hinges (I) to the door and the right side panel (5). Use hardware D (3*12mm screws) and H (metal brackets). Attach the door handle (J) to the door using screws.
Hardware used: D (x4), H (x2), I (x1), J (x1)
Parts used: 5, 9
Step 9: Wall Mounting
This step describes how to mount the cabinet to the wall. Ensure the cabinet is securely fastened to a suitable wall structure.
Textual translation of "WALL": WALL (English), WAND (German), MUR (French), PARED (Spanish), PARETE (Italian), ŚCIANA (Polish).
Hardware used for wall mounting: A (3.5*40mm screws), B (3*14mm screws). The diagram shows screws A and B passing through the back panel into the wall.
Note: Wall mounting hardware may vary depending on your wall type. Consult a professional if unsure.
