USER'S MANUAL
Wall Mirror Cabinet
Hardware List
| Item | Description | Quantity |
|---|---|---|
| A | Screw (4*35mm) | 12 pcs |
| B | Screw (4*40mm) | 8 pcs |
| C | Screw | 2 pcs |
| D | Screw | 2 pcs |
| E | Screw (3*12mm) | 8 pcs |
| F | Connector/Bracket | 2 pcs |
| G | Connector/Bracket | 4 pcs |
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Shelf | 1 pc |
| 2 | Shelf | 1 pc |
| 3 | Shelf | 1 pc |
| 4 | Side Panel | 1 pc |
| 5 | Side Panel | 1 pc |
| 6 | Cabinet Door | 1 pc |
| 7 | Back Panel/Support | 1 pc |
| 8 | Back Panel/Support | 1 pc |
Assembly Instructions
Step 1
Attach side panels (4, 5) to the back panel/support (7) using screws (A) and connectors/brackets (E, F).
Diagram Description: Two side panels (labeled 5) are shown being connected to a central back panel (labeled 7). Screws (A) and smaller connectors (E, F) are used for this assembly.
Step 2
Attach the main shelf (1) to the side panels (4, 5) using screws (A) and (B).
Diagram Description: A shelf (labeled 1) is positioned between the two side panels (labeled 4 and 5). Screws (A) and longer screws (B) are used to secure the shelf to the side panels.
Step 3
Attach the second back panel/support (8) to the assembled structure.
Diagram Description: A back panel (labeled 8) is being attached to the rear of the partially assembled cabinet structure.
Step 4
Attach the remaining shelves (3) to the side panels (4, 5) using screws (A) and (B).
Diagram Description: Two shelves (labeled 3) are being attached to the inner sides of the cabinet structure using screws (A) and (B).
Step 5
Attach the cabinet door (6) to the side panel (5) using screws (E).
Diagram Description: The cabinet door (labeled 6) is shown being attached to one of the side panels (labeled 5) using screws (E).
Step 6
Mount the assembled cabinet to a wall or desired surface using screws (C) and (D).
Diagram Description: The complete cabinet unit is depicted being secured to a vertical surface using screws (C) and (D).
Step 7
Insert the final shelf (2) into the cabinet, securing it with brackets/connectors (G).
Diagram Description: A shelf (labeled 2) is being slid into its final position inside the assembled cabinet. Brackets/connectors (G) are used to secure it.
