BRAYER BR3010 Hair Dryer

Product Description

The hairdryer is intended for hair drying and styling.

Description of Parts

• 1. Air flow speed switch (0/I/II)
• 2. Air flow temperature switch (I/II/III)
• 3. «Cool shot» button « * »
• 4. Nozzle
• 5. Diffuser
• 6. Comb Nozzle
• 7. Body
• 8. Air inlet grid
• 9. Handle
• 10. Hanging loop

Important Safety Notice

ATTENTION! Do not use the unit near water in bathrooms, showers, swimming pools etc. After using the hairdryer in a bathroom, unplug the power plug from the mains socket. For additional protection, it is recommended to install a residual current device (RCD) with a nominal operation current not exceeding 30 mA. Consult an electrical technician for installation.

Safety Measures and Operation Recommendations

Read the operation instructions carefully before using the unit and keep them for future reference.

• Use the hairdryer for its intended purpose only.
• Mishandling can lead to breakage, harm to the user, or damage to property, and is not covered by warranty.
• The hairdryer is intended for styling slightly wet and dry hair; do not use for wet hair or synthetic wigs.
• Ensure the operating voltage indicated on the label matches your home mains voltage.
• Do not use the unit when drowsy.
• Do not use the unit outdoors.
• It is recommended not to use the hairdryer during lightning storms.
• Protect the unit from blows, drops, vibrations, and other mechanical stress.
• Never leave the plugged-in hairdryer unattended.
• Do not use the hairdryer near heating appliances, heat sources, or open flame.
• Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids.
• Do not use the hairdryer near kitchen sinks, in bathrooms, near swimming pools, or other containers filled with water.
• Do not use the unit while taking a bath.
• Do not hang or keep the hairdryer where it can fall into a bath or sink filled with water; do not immerse the unit body, power cord, or plug into water or any other liquid.
• If the unit is dropped into water, unplug it immediately, and only then remove it from the water.
• Do not let the power cord touch hot surfaces and sharp edges of furniture.
• Unplug the unit after usage or before cleaning. When unplugging, hold the power plug and carefully remove it from the mains socket; do not pull the power cord, as this can lead to damage and a short circuit.
• Do not touch the unit body, power cord, or plug with wet hands.
• Avoid contact of hot surfaces of the hairdryer with your face, neck, and other parts of your body.
• Do not direct hot air into your eyes or other heat-sensitive parts of your body.
• Before drying and styling, wash your hair with shampoo, dry with a towel to remove excessive moisture, and comb your hair.
• Never insert any foreign objects into any hairdryer body openings.
• Do not block the air inlets of the hairdryer, do not place it on a soft surface where air inlets may be blocked. Keep air inlets free of lint, dust, hair etc.
• Regularly clean the hairdryer body and attachments.
• Unplug the unit after usage and before cleaning.
• For children's safety, do not leave polyethylene bags used as packaging unattended.
• The hairdryer is not intended for use by children.

ATTENTION!

Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

Do not leave children unattended to prevent them from using the unit as a toy.

Do not allow children to touch the operating surface, unit body, power cord, or power plug during operation.

Be especially careful if children or disabled persons are near the operating unit.

During operation and breaks between cycles, place the unit out of reach of children.

The unit is not intended for use by persons (including children) with physical, mental, or sensory impairments, or lack of experience or knowledge, unless supervised by a responsible person or instructed by them.

Maintenance and Checks

Periodically check the power cord. If damaged, it must be replaced by the manufacturer, a maintenance service, or similar qualified personnel to avoid danger.

Do not repair or disassemble the unit yourself. If a malfunction occurs or after dropping, unplug and contact a service center.

Transport the unit in its original packaging to avoid damage.

Store in a dry, cool place, out of reach of children and disabled persons.

Usage Guidelines

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.

Before First Use

After transportation or storage at negative temperatures, unpack and wait at least 3 hours before use.

• Unpack the hairdryer and remove all packaging materials and stickers.
• Keep the original package.
• Read safety measures and operating recommendations.
• Check the delivery set.
• Examine the unit for damages; do not plug in if damaged.

Using the Hairdryer

Ensure the hairdryer's power supply specifications match your mains voltage. For 60 Hz mains, no additional measures are needed.

Wipe the hairdryer body (7) and nozzle (4) with a clean, slightly damp cloth, then dry.

Connecting to Power

Before plugging in, ensure the hairdryer's operating voltage matches your mains voltage.

• Insert the power plug into the mains socket.
• Set air flow speed with switch (1): 0 (off), I (low), II (high).
• Set air flow temperature with switch (2): I (low), II (medium), III (maximal).

Hair Drying

Set temperature switch (2) to medium (II) or maximal (III) and select air flow speed with switch (1).

Hold the hairdryer by the handle (9) during operation.

Move the hairdryer over hair, using hand or comb to remove excess moisture.

Note: A slight foreign smell and smoke may appear from the heating element during the first operation; this is normal and not covered by warranty.

Nozzle Attachment (4)

Use the nozzle (4) to concentrate drying on small areas or straighten wavy hair.

Attach nozzle (4) to the hairdryer body (5).

Plug in, set speed (1) and temperature (2).

Diffuser (5)

The diffuser (5) is used for various hairstyles, adding volume at roots or along the length, creating curls and waves.

Attach diffuser (5) to the hairdryer body.

Switch on and set the desired mode.

After use, unplug the unit.

Comb Nozzle (6)

The professional comb nozzle styles and smooths hair, allowing drying without a brush.

Attach comb nozzle (6) to the hairdryer body.

Switch on and set the desired mode.

After use, turn off with switch (1) to position '0' and unplug.

Cool Shot

Use the «cool shot» button (3) to fix your hairstyle.

Press and hold the «cool shot» button (3) « * » when the desired effect is achieved.

After finishing, switch off with switch (1) to position '0' and unplug.

Overheating Protection

The overheating protection system switches the hairdryer off if the outgoing air temperature exceeds the limit.

If the hairdryer switches off during operation, unplug it and check if air inlets/outlets are unblocked.

Allow the hairdryer to cool for 10-15 minutes before switching it on again. Do not block air openings and prevent dust, lint, or hair from entering the air inlet grid (8).

Cleaning and Maintenance

The hairdryer is for household use only.

• Switch off (1 to '0'), unplug, and wait for cooling.
• Wipe body (7) and nozzles (4, 5, 6) with a slightly damp cloth, then dry.
• Clean air inlet grid (8) with a brush.
• Do not immerse in water or other liquids.
• Do not use abrasive cleaners or solvents.

Storage

• Disconnect from mains and clean.
• Do not wind the power cord around the body; it can cause damage.
• Use the hanging loop (10) for storage, ensuring no water can reach the unit.
• Store in a dry, cool place, out of reach of children and disabled persons.

Delivery Set

• Hairdryer – 1 pc.
• Nozzle – 1 pc.
• Diffuser – 1 pc.
• Comb nozzle – 1 pc.
• Manual – 1 pc.

Technical Specifications

• Power supply: 220-240 V, ~ 50-60 Hz
• Rated input power: 2200 W

Diagram of Hairdryer Components

The diagram shows a hairdryer with numbered parts: 1. Air flow speed switch, 2. Air flow temperature switch, 3. Cool shot button, 4. Nozzle, 5. Diffuser, 6. Comb Nozzle, 7. Body, 8. Air inlet grid, 9. Handle, 10. Hanging loop. It also shows the nozzle and diffuser attachments.

Recycling

To prevent environmental damage or harm to health from uncontrolled waste disposal, do not discard the unit or batteries with household waste after their service life. Take them to specialized collection points for recycling.

Waste generated during product disposal must be collected and disposed of properly.

For more information on recycling, contact your local municipal administration, household waste disposal service, or the shop where you purchased the product.

Manufacturer Information

The manufacturer reserves the right to change design, construction, and technical specifications that do not affect general operation principles, without prior notice.

Unit operating life: 3 years.

Manufacturing date is specified in the serial number.

In case of malfunctions, contact an authorized service center promptly.