BRAYER BR1265 Blender

Description

The blender set is used for chopping, mixing, joint processing of liquid and solid food.

Components:

1. Blender attachment
2. Attachment release buttons
3. Maximum speed TURBO button [?]
4. ON/OFF button [⏻]
5. Rotation speed control knob
6. Whisks of the mixer attachment
7. Gear of the mixer attachment
8. Chopper geared lid
9. Upper blade
10. Lower blade
11. Chopper container
12. Cup

Diagram Description:

The diagram illustrates the BRAYER BR1265 blender and its components. The main unit features a handle with control buttons: a maximum speed 'TURBO' button (3), an ON/OFF button (4), and a rotation speed control knob (5). Release buttons (2) are located on the neck, and the blender attachment (1) is at the base. Separate attachments include mixer whisks (6) connected to a gear unit (7), and a chopper attachment consisting of a container (11), blades (9, 10), and a geared lid (8). A measuring cup (12) with volume markings in ml and fl.oz. is also shown.

Safety Measures and Operation Recommendations

Read the operation instructions carefully before using the unit, after reading keep them for future reference.

• Use the unit for its intended purpose only, as stated in this manual.
• Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user's property, which is not covered by warranty.
• Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage.

CAUTION! Continuous operation time with attachments should not exceed 15 to 30 seconds. After 2 operation cycles, take a break of at least 3 minutes.

• Do not use the unit outdoors.
• It is recommended not to use the unit during lightning storms.
• Protect the unit from impacts, falling, vibrations and other mechanical stress.
• Never leave the unit connected to the mains unattended.
• Do not use the unit near heating appliances, heat sources or open flame.
• Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids.
• Do not use the unit in proximity to the kitchen sink, in bathrooms, near swimming pools or other containers filled with water.
• If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water. Apply to the authorized service center for testing or repairing the unit.
• Do not let the power cord touch hot surfaces and sharp edges of furniture.
• Unplug the unit after usage or before cleaning. When unplugging the unit, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.
• Do not touch the unit body, the power cord and the power plug with wet hands.
• Before using the unit for the first time, thoroughly wash all the removable attachments and containers that will contact food.
• Use only the parts supplied.
• Do not touch rotating parts of the device. Do not allow hair or loose clothing to get into the area where the blender blades or mixer whisks rotate.
• Before using the unit, make sure that the attachments are installed properly and fixed.
• Place the chopper bowl on a flat and steady surface.
• Put the products into the chopper bowl before switching the unit on. Do not switch the unit on if the chopper bowl is empty.
• Cool down hot products before putting them into the chopper bowl.
• Watch the amount of products put in the chopper bowl and the level of poured liquids.
• Cutting edges of the chopping knife and the blender attachment are sharp and dangerous. Be careful while using the chopping knife and the blender attachment.
• If the chopping knife stops during the unit operation, switch the unit off, unplug it and open the geared lid, remove the product which is hindering the knife rotation. If the chopping knife or blender attachment rotation is hindered, it is recommended to add some water, juice, liquor etc. into the chopper bowl or the container used with the blender attachment.
• Remove the motor unit from the chopper bowl only after disconnecting the motor unit from the mains.
• Do not place the chopper bowl and the measuring cup into a microwave oven.
• Do not put the attachments and bowls in a dishwashing machine.
• For children safety reasons do not leave polyethylene bags used as a packaging unattended.

CAUTION! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using the unit as a toy.
• Do not allow children to touch the operating surface, the unit body, the power cord or the power plug during operation of the unit.
• Be especially careful if children or disabled persons are near the operating unit.
• During the unit operation and breaks between operation cycles, place the unit out of reach of children.
• The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after the unit was dropped, unplug it and apply to the service center.
• To avoid damages, transport the unit in the original package.
• Keep the unit in a dry cool place out of reach of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR LABORATORY PURPOSES.

Before the First Use

After the unit's transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.

• Unpack the unit and remove all the packaging materials.
• Keep the original package.

Using the Blender Attachment

Continuous operation time of the blender attachment (1) should not exceed 30 seconds. Stop using for at least 3 minutes between two operation cycles.

• Use the blender attachment (1) for making sauces, mayonnaise, fruit puree, baby food, mixing various ingredients and for processing fruit and vegetables containing enough liquid.
• Before installing the blender attachment (1), make sure that the power plug is not inserted into the mains socket.
• Insert the blender attachment (1) into the motor unit until the release buttons (2) clicking, make sure that the attachment is fixed properly.
• Insert the power plug into the mains socket.
• Immerse the blender attachment (1) into the bowl with food that you want to chop/mix; you can also put the food in the measuring cup (11).

CAUTION! Hold the motor unit with the blender attachment (1) vertically while processing the food

• To switch the unit on, press and hold down the ON/OFF button [⏻]. Use this operation mode for mixing liquid products.
• When pressing and holding the ON/OFF button [⏻] (4), you can adjust the rotation speed of the blender attachment (1) by turning the control knob (5). Use this operating mode to process liquid and solid food.
• To operate in the maximum rotation speed mode, press and hold down the TURBO button [?] (3).

CAUTION! When chopping hard vegetables, for example, carrots -- cut the carrot into small 15x15x15 mm pieces and put them in the cup (11). The maximal weight of the carrot should not exceed 150g. Add 250 ml of water.

• To switch the blender attachment (1) rotation off, release the button (3 or 4).
• After you finish the unit operation, take the power plug out of the mains socket and remove the blender attachment (1) by pressing the release buttons (2).

CAUTION!

• Do not remove the blender attachment (1) during the unit operation.
• To avoid damaging the knives of the blender attachment (1), do not process very hard products, such as cereals, rice, coffee beans, hard cheese, frozen food etc.
• If the foodstuffs are hard to chop with the blender attachment (1), add some water, juice, liquor etc.

Mixer Attachment

Continuous operation time with the mixer attachment should not exceed 30 seconds. Take a break of at least 3 minutes between two operation cycles.

• The mixer attachment is used for whipping soft ingredients such as egg whites, cream, instant desserts, etc.
• Do not mix or whip harder mixtures such as margarine, as this may damage the mixer attachment.
• Do not whip more than 6 egg whites or 1000 ml of cream at a time.
• Before assembling the mixer attachment, make sure that the power plug is not inserted into the mains socket.
• Insert the whisks (6) into the gear (7), make sure that the whisks are securely fixed.
• Insert the power plug into the mains socket.
• Place the mixer attachment in a container with the food you want to mix or whip; you can place the food in the cup (12).

CAUTION! When processing food, hold the motor unit with the mixer attachment vertically.

• To switch on, press and hold down the ON/OFF button [⏻] (4). Use this operating mode to mix liquid food.
• When pressing and holding the ON/OFF button [⏻] (4), you can adjust the rotation speed of the whisks (6) of the mixer attachment by turning the control knob (5). Use this operating mode to whip food.
• To operate in the maximum rotation speed mode, press and hold down the TURBO button [?] (3).
• To turn off the rotation of the whisks (6) of the mixer attachment, release the button (3 or 4).
• After finishing work, remove the power plug from the mains socket and remove the mixer attachment by pressing the release buttons (2).
• Remove the whisks (6) from the gear (7) and rinse them.

Chopper

Continuous operation time of the chopper attachment should not exceed 30 seconds. Stop using for at least 3 minutes between two operation cycles.

• The attachment is used to chop meat, cheese, onion, herbs, garlic, carrots, walnuts, prunes, vegetables or fruit.

CAUTION! Do not chop very hard products, such as nutmegs, coffee beans, cereals, frozen food or ice.

Preparing the Food Before Chopping:

• Remove bones, veins, cartilage and fat from meat.
• Cut meat, cheese, onions, vegetables or fruit into pieces approximately 60x20x20 mm in size. Maximal weight of the meat should not exceed 200 g.
• Remove stems of herbs, shell nuts.

Chopping:

• Before assembling the chopper, make sure that the power plug is not inserted into the mains socket.
• Place the chopper container (11) on a flat and stable surface.
• Place the upper blade (9) on the lower blade (10) and turn it clockwise until it stops, install the blades on the axle inside the container (11). If there is a protective cover on the blades (9, 10), remove it carefully.
• Keep in mind: the cutting edges of the blades (9, 10) are very sharp! Always hold the blades (9, 10) by the plastic shank.
• Place the food in the container (11). Note: do not switch the device on with an empty container (11).
• Install the gear cover (8) on the container (11) and turn it clockwise until it stops.
• Press on the locks (2) and install the motor unit on the neck of the gear cover (8), make sure that the motor unit is securely fixed. Install the motor unit vertically and without distortions.
• Insert the power plug into the mains socket.
• To switch on, press and hold down the ON/OFF button [⏻] (4).
• When pressing and holding the ON/OFF button [⏻] (4), you can adjust the rotation speed of the blades (9, 10) by turning the control knob (5).
• To operate in the maximum rotation speed mode, press and hold down the TURBO button [?] (3).
• During operation, hold the motor unit with one hand and the chopper container (11) with the other hand.
• Release the button (3 or 4) to switch off.
• After using the device, wait until the blades (9, 10) stop rotating completely.
• Remove the power plug from the mains socket.
• Disconnect the motor unit from the gear cover (8) by pressing the release buttons (2).
• Remove the gear cover (8) from the container (11) by turning it counterclockwise.
• Carefully remove the blades (9, 10) from the container (11) by holding the plastic shank.
• Remove the chopped food from the container (11).

Cleaning

CAUTION! The cutting edges of the blades (9, 10) are very sharp and can be dangerous. Handle the blades (9, 10) with extreme care!

• Remove the power plug from the mains socket after using the device.
• Wash the whisks (6), chopper bowl (11), blades (9, 10), cup (12) with warm water and neutral detergent, rinse and dry them.
• Wash only the lower part of the blender attachment (1), clean the outer surface with a slightly damp cloth. Never immerse the blender attachment (1) in water or any other liquids completely.
• Wipe the motor unit, gear cover (8), gear of the mixer attachment (7) with a soft, slightly damp cloth, then wipe dry.
• After processing salty or sour food, immediately rinse the blender attachment (1) or blades (9, 10) with water.
• While processing products with dyeing properties (for instance, carrot or beetroot), the attachments and bowls can get colored. Wipe the attachments and the bowls with a cloth, dampened in vegetable oil; after that wash the attachments and bowls with a neutral detergent, rinse and dry them.
• Do not immerse the motor unit, the gear (6), the geared lid (8) into any liquids, do not wash them under water jet or in a dishwashing machine.
• Do not use abrasives and solvents to clean the motor unit body and the removable parts.

Storage

• Clean the unit parts before taking it away for long storage.
• Do not wind the power cord around the motor unit.
• Keep the unit in a dry cool place out of reach of children and disabled persons.

Delivery Set

• Motor unit – 1 pc.
• Blender attachment – 1 pc.
• Gear of the mixer – 1 pc.
• Whisks of the mixer attachment – 2 pcs.
• Chopper gear cover – 1 pc.
• Blades – 2 pcs.
• Chopping bowl – 1 pc.
• Cup – 1 pc.
• Instruction manual – 1 pc.

Technical Specifications

• Power supply: 220-240 V, ~ 50-60 Hz
• Rated input power: 1500 W
• Cup – 800 ml
• Chopper bowl – 600 ml

Recycling

To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after expiration of the service life of the unit or the batteries (if included), do not discard them with usual household waste, take the unit and the batteries to specialized stations for further recycling. ♻️

The waste generated during the disposal of products is subject to mandatory collection and consequent disposal in the prescribed manner.

For further information about recycling of this product apply to a local municipal administration, a household waste disposal service or to the shop where you purchased this product.

The manufacturer reserves the right to change the design, structure and specifications not affecting general operation principles of the unit, without prior notice.

The unit operating life is 3 years. The manufacturing date is specified in the serial number. In case of any malfunctions, it is necessary to apply promptly to the authorized service center.