Daikin Wireless LAN Adapter Installation Guide

Introduction

This document provides installation instructions for the Daikin Wireless LAN Adapter, enabling remote control of Daikin air conditioning units via a wireless network.

Included Accessories

Verify that the following accessories are included in your package:

For BRP069B41:

• (A) Wireless LAN Adapter
• (B) Installation Manual

For BRP069B42:

• (A) Wireless LAN Adapter
• (B) Installation Manual
• (C) Bracket
• (D) Cable Bundle
• (E) Cable Clip with Base

For BRP069B43 & BRP069B44:

• (A) Wireless LAN Adapter
• (B) Installation Manual
• (C) Bracket
• (D) Cable Bundle
• (E) Cable Clip with Base
• (F) Distribution Box (for BRP069B43)
• (G) PCB Board (for BRP069B43 & BRP069B44)

For BRP069B45:

• (A) Wireless LAN Adapter
• (B) Installation Manual
• (D) Cable Bundle

Diagrams illustrating these components are provided within the original manual.

Safety Precautions

Read and understand all safety instructions before installation and use.

General Safety

• The original manual is in English; other languages are translations.
• Refer to this manual for pictogram meanings.
• Hand over this installation manual to the customer after installation is complete.
• Follow the instructions in the air conditioner's installation manual for trial operation.
• Devices marked with a double insulation symbol ([Double Insulation Symbol]) are protected by double insulation and do not require a protective earth connection.

Warnings (Situations that could cause death or serious injury):

During Installation:

• Request installation from a dealer or technician. (Risk of electric shock or fire.)
• Always use the specified accessories and parts. Follow the instructions in this manual. (Risk of unit falling, electric shock, or fire.)
• Electrical installation must comply with the installation manual and national wiring regulations.
• Always turn off the power supply before installation. (Touching electrical components can cause electric shock.) The main power switch is located on the outdoor unit.

During Use:

• Do not disassemble, modify, or repair the unit. (Risk of fire, electric shock, or injury.)
• Do not operate with wet hands. (Risk of electric shock or fire.)
• Do not get the product wet. Do not use during bathing or similar water-related activities. (Risk of electric shock or fire.)
• Do not use near medical equipment like pacemakers or defibrillators, as it may cause life-threatening electromagnetic interference.
• Do not use near automatic doors or fire alarm systems, as it may cause accidents due to malfunction.
• If unusual smells, sounds, overheating, or smoke occurs, unplug the unit immediately. (Risk of fire or malfunction.) Contact your dealer for inspection.
• If the air conditioner has fallen or the cover is damaged, unplug the unit. (Risk of fire or electric shock.) Contact your dealer for inspection.

Attention (Situations that could cause equipment damage or personal injury):

During Installation:

• Do not install where flammable gas may leak. (Risk of fire.)
• When disconnecting, hold the connecting cable by the connector. (Otherwise, risk of fire or electric shock.)

During Use:

• Do not use in locations accessible to small children. (Risk of injury.)
• Do not use near a microwave oven, as it may affect wireless LAN communication.

Waste Disposal Requirements

The product is marked with a symbol ([Waste Disposal Symbol]) indicating it should not be disposed of with household waste. Do not attempt to disassemble it yourself; only qualified installers should perform disassembly according to local and national regulations. Dispose of the product and waste at designated facilities for reuse, recycling, and recovery. Proper disposal helps prevent negative environmental and health impacts. Contact your installer or local authority for more information.

Main Components

The Daikin Wireless LAN Adapter features:

• RUN Indicator: (Orange) Lights up when connected to a router (wireless LAN access point).
• AP Indicator: (Yellow) Lights up when directly connected to a smartphone.
• SETUP Button: Used for connecting to a router (wireless LAN access point).
• MODE Button: Press and hold to switch between RUN/AP modes.
• POWER Button: Turns the WLAN adapter ON or OFF.

Diagrams on pages 8 show the adapter with these components labeled.

Specifications

• Frequency Range: 2400 MHz–2483.5 MHz
• Radio Protocol: IEEE 802.11b/g/n
• RF Channel: 1–11
• Output Power: 0 dBm–18 dBm
• ERP: 17 dBm (11b)/13 dBm (11g)/12 dBm (11n)
• Electrical Power: DC 14 V/100 mA

RF Channel refers to the radio frequency channel. ERP refers to Effective Radiated Power.

Compatible Indoor Units

For further details on installing the Wireless LAN Adapter and compatible units, visit app.daikineurope.com.

Installation

Important: Always turn off the power supply before installation. Touching electrical components can cause electric shock. The main power switch is located on the outdoor unit.

1. Choosing the Installation Location

The WLAN adapter should be installed in a location meeting the following requirements:

• The adapter is not exposed to direct sunlight.
• The adapter is located away from heat sources or steam.
• No source of oil vapor is nearby (which could shorten the lifespan of the indoor unit).
• The adapter is at least 1 meter away from televisions or radios (to prevent interference with picture or sound).
• The distance between the indoor unit and the WLAN adapter is determined by the length of the WLAN adapter's cable.

2. Attaching the Top Cover

Remove the top cover of the Wireless LAN Adapter. Diagrams show the adapter with the top cover removed, revealing the PCB, and the bottom cover with a cable slot.

3. Attaching the Connecting Cable

Connect the white connecting cable connector. Secure the connecting cable into the slot in the bottom cover of the adapter. Connect the connector to the same color. Diagrams show connecting the white cable to the adapter's internal port and securing the cable.

4. Reattaching the Adapter Cover

Secure the top part of the top cover into the clip on the top of the bottom cover, then close the unit by pressing. Check that the connecting cable is securely fastened. Attach the top cover with 2 screws from the accessory kit. Diagrams illustrate aligning the covers and securing them with screws.

5. Installing the Wireless LAN Adapter

For BRP069B41/B45:

Install the WLAN adapter inside the indoor unit. For details, visit app.daikineurope.com.

For BRP069B42/B43/B44:

Install the WLAN adapter externally to the indoor unit. Installation can be done via Method A or Method B.

Method A (Screw Mounting):

The WLAN adapter is mounted to the wall/surface using screws. The bracket does not need to be attached with double-sided tape.

1. Attach the WLAN adapter bracket to the wall/surface using 2 screws from the accessory kit.
2. Attach the WLAN adapter by sliding it into the bracket.

For details, visit app.daikineurope.com. Diagrams show the bracket with screw holes and the adapter sliding into it.

Method B (Double-Sided Tape Mounting):

The WLAN adapter is mounted to the wall/surface using double-sided tape. Screws from the accessory kit are not needed for the bracket.

1. Attach the double-sided tape from the accessory kit to the back of the bracket as shown.
2. Mount the WLAN adapter bracket to the wall/surface using the double-sided tape.
3. Ensure the bracket is securely attached to the wall/surface to hold the WLAN adapter.
4. Attach the WLAN adapter by sliding it into the bracket.

NOTE: Before attaching the bracket with double-sided tape, clean and degrease the wall/surface. Diagrams show the bracket with double-sided tape applied and the adapter sliding into it.

For details, visit app.daikineurope.com.

6. Functionality Check

Turn on the power and check if the product's [RUN] LED is blinking. Important: Always attach the top cover of the adapter when powering on. Diagrams show the adapter with the RUN LED highlighted.

Configuration

The customer is responsible for the following:

• A smartphone or tablet (refer to app.daikineurope.com for minimum supported Android and iOS versions).
• An internet connection and communication device (modem/router or similar).
• A wireless LAN access point.
• The [ONECTA App] (free).

Installing the ONECTA App:

• For Android Devices:
  1. Open the [Google Play] store.
  2. Search for [ONECTA App].
  3. Follow the on-screen installation instructions.
• For iPhone Devices:
  1. Open the [App Store].
  2. Search for [ONECTA App].
  3. Follow the on-screen installation instructions.

Detailed installation instructions can be found on app.daikineurope.com.

Troubleshooting

The following table provides solutions for common issues during installation or connection setup. For more details, refer to the FAQ section on the homepage.