Daikin Wireless LAN Connecting Adapter Installation Manual

Introduction

This manual provides instructions for installing the Daikin Wireless LAN Connecting Adapter, which allows for remote control of Daikin air conditioning units via a smartphone or tablet.

Safety Precautions

⚠️ Warning: Situations which could result in death or serious injury.

• Do not disassemble, modify, or repair. (Can cause fire, electric shock or injury.)
• Do not handle this product with wet hands. (Can cause electric shock or fire.)
• Do not allow this product to get wet or use it when bathing or doing similar activities with water. (Can cause electric shock or fire.)
• Do not use this product near medical equipment or persons using cardiac pacemakers or defibrillators. This product may cause life-threatening electromagnetic interference.
• Do not use this product near auto-control equipment such as automatic doors or fire alarm equipment. (Can cause accidents due to erroneous equipment behavior.)
• Immediately disconnect the air conditioner power plug if there is abnormal odor or sound, when it is overheating, or smoking. (Can cause fire or malfunction.) Request an inspection by your dealer.
• Disconnect the air conditioner power plug if the product was dropped or the case is damaged. (Can cause fire or electric shock.) Request an inspection by your dealer.
• When installing: Request installation by your dealer or a technician. (Can cause electric shock or fire.)
• Always use the accessories and specified parts for installation. Be sure to follow the directions in this installation manual. (Can cause the unit to fall, electric shock or fire.)
• Electrical work should be carried out in accordance with the installation manual and the national electrical wiring rules or code of practice.
• Always turn off the power supply when installing. (Touching the electrical parts can cause an electric shock.) The main switch of the installation is at the outdoor unit. Please switch off this main switch to turn off the power supply.

⚠️ Caution: Situations which could result in damage or physical injury.

• Do not install where flammable gas leaks can occur. (Can cause fire.)
• Grip the connector when disconnecting the connecting cord. (Otherwise fire or electric shock can occur.)
• When using: Do not use where small children can get access. (Can cause injuries.)
• Do not use this product near a microwave oven. (This can affect Wireless LAN communications.)

The English text is the original instruction. Other languages are translations of the original instructions.

The following describes the meanings of pictorial symbols used in this documentation:

• ? Prohibited
• ➡️ Follow directions

Give this installation manual to the customer when installation is completed.

To conduct a test run of the air conditioner, follow the installation manual for the air conditioner unit.

The protection of appliances marked with this symbol [double insulation symbol] is ensured by double insulation and does not require a safety connection to electrical earth (ground).

Accessories

Check if the following accessories are included in your package.

BRP069B41

• (A) Wireless LAN connecting adapter [Image: Daikin Wireless LAN adapter]
• (B) Installation manual [Image: Daikin Installation Manual booklet]

BRP069B42

• (A) Wireless LAN connecting adapter [Image: Daikin Wireless LAN adapter]
• (B) Installation manual [Image: Daikin Installation Manual booklet]
• (C) Holder [Image: Plastic holder for adapter]
• (D) Wire harness [Image: Set of wires]
• (E) Cable tie with base [Image: Cable tie with adhesive base]

BRP069B43

• (A) Wireless LAN connecting adapter [Image: Daikin Wireless LAN adapter]
• (B) Installation manual [Image: Daikin Installation Manual booklet]
• (C) Holder [Image: Plastic holder for adapter]
• (D) Wire harness [Image: Set of wires]
• (F) Switch box [Image: Small plastic box]
• (G) PCB [Image: Printed Circuit Board]

BRP069B44

• (A) Wireless LAN connecting adapter [Image: Daikin Wireless LAN adapter]
• (B) Installation manual [Image: Daikin Installation Manual booklet]
• (C) Holder [Image: Plastic holder for adapter]
• (D) Wire harness [Image: Set of wires]
• (G) PCB [Image: Printed Circuit Board]

BRP069B45

• (A) Wireless LAN connecting adapter [Image: Daikin Wireless LAN adapter]
• (B) Installation manual [Image: Daikin Installation Manual booklet]
• (D) Wire harness [Image: Set of wires]

Basic Parameters

RF channel: Radio frequency channel

ERP: Effective radiated power

Installation

Installation Work

⚠️ Always turn off the power supply when installing. (Touching the electrical parts can cause an electric shock.) The main switch of the installation is at the outdoor unit.

1. Choosing and installation site

The WLAN adapter should be sited in a place where:

• The adapter is not in the path of direct sunlight.
• The adapter is away from the source of heat or steam.
• There is not source of machine oil vapour (this may shorten indoor unit life).
• The adapter is at least 1 m away from any television or radio set (unit may cause interference with the picture or sound).
• Distance between the indoor unit and the WLAN adapter is within length of WLAN cable.

2. Remove the adapter case (upper)

Remove the upper case of the wireless LAN adapter.

[Diagram: Shows the upper case being removed from the adapter, revealing the circuit board. Labels: "Adapter case (upper)", "Wireless LAN connecting adapter printed circuit board", "Adapter case (lower)".]

3. Attach connecting cord to the product.

Attach the connecting cord connector (white).

[Diagram: Shows the white connector being attached to the adapter. Labels: "Connector (white)".]

Fasten the connecting cord to the notch in the adapter case (lower).

[Diagram: Shows the connecting cord being routed through a notch in the lower case.]

Connect the connector to the same color.

Fasten the connecting cord and ensure that external force is not transmitted.

4. Return the adapter case to its original state.

Snap the top of the upper case onto the clip at the top of the lower case and press to close the box.

[Diagram: Shows the upper case being snapped back onto the lower case, with clips indicated. Labels: "Adapter case (lower) top portion clip", "Adapter case (upper) top portion clip".]

Check that the connecting cord is securely fastened.

Fix the upper adapter case with 2 screws located in accessory set.

5. Installation of Wireless LAN adapter

For BRP069B41/B45:

Install WLAN adapter inside the indoor unit. For more details about installation of WLAN adapter to your model please visit http://www.onlinecontroller.daikineurope.com.

For BRP069B42/B43/B44:

Install the WLAN adapter outside the indoor unit. There are two ways of installation A and B.

TYPE A

Position of the WLAN adapter on the wall/surface is fixed by screws. In this case double face tapes located in accessory set are not necessary to fix the holder.

1. Fix the WLAN holder on the wall/surface with 2 screws located in accessory set.
2. Attach the WLAN adapter to the holder by sliding into it.

[Diagram: Shows the holder being screwed to a surface and the adapter sliding into the holder. Labels: "Holes for screws", "Holder".]

For more details about installation of WLAN adapter to your model please visit http://www.onlinecontroller.daikineurope.com.

TYPE B

Position of the WLAN adapter on the wall/surface is fixed by double face tapes. In this case screws located in accessory set are not necessary to fix the holder.

1. Attach two double face tapes located in accessory set to the back side of holder as shown below.
2. Fix the WLAN holder on the wall/surface with the double face tape.
3. Make sure that holder is fixed to the wall/surface enough to bear the WLAN adapter.
4. Attach the WLAN adapter to the holder by sliding into it.

NOTE: Wall/surface should be clean and degreased before attaching of the WLAN holder by double face tapes.

[Diagram: Shows double face tape being applied to the holder, and the adapter sliding into the holder. Labels: "Double face tape", "Holder".]

For more details about installation of WLAN adapter to your model please visit http://www.onlinecontroller.daikineurope.com.

6. Functionality Check

Turn on the power supply and check that the [RUN] lamp of the product links.

[Diagram: Shows the adapter with the [RUN] lamp illuminated.]

⚠️ When turning on the power, always attach the adapter case (top).

Configuration

The customer is responsible for providing the following:

• Smartphone or tablet PC (Supported OS: Android 2.3.3 or later; iOS 5.0 or later.)
• Internet line and communicating device (Modem/router or similar device)
• Wireless LAN access point
• [Daikin online controller] (No cost)

Installation method of Daikin online controller:

For Android Phones:

1. Open the [Google Play].
2. Search for [Daikin online controller].
3. Follow the directions on the screen to install.

For iPhones:

1. Open the [App Store].
2. Search for [Daikin online controller].
3. Follow the directions on the screen to install.

Refer to http://www.onlinecontroller.daikineurope.com for detailed installation instructions.

Troubleshooting

The following table provides brief descriptions of how to handle trouble or uncertainties when you install the product or make connection settings. Refer to the FAQ on the homepage for more details.

Disposal Requirements

ℹ️ Your product is marked with this symbol [WEEE symbol]. This symbol means that electrical and electronic products shall not be mixed with unsorted household waste.

NOTICE: Do NOT try to dismantle the system yourself: dismantling of the system, treatment of the refrigerant, oil and other parts MUST comply with applicable legislation. Units MUST be treated at a specialised treatment facility for reuse, recycling and recovery.

Product and waste must be treated at a specialized treatment facility for re-use, recycling and recovery.

By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health. Please contact the installer or local authority for more information.