Daikin Wireless LAN Connecting Adapter Installation Manual

Homepage

For details on specifications, setting methods, FAQ, copy of the original declaration of conformity and the latest version of this manual, visit: app.daikineurope.com

Daikin Industries Czech Republic s.r.o. declares that the radio equipment type BRP069B41 is in compliance with Directive 2014/53/EU.

Accessories

Check if the following accessories are included in your package:

BRP069B41

• (A) Wireless LAN connecting adapter
• (B) Installation manual

BRP069B42

• (A) Wireless LAN connecting adapter
• (B) Installation manual
• (C) Holder
• (D) Wire harness
• (E) Cable tie with base

BRP069B43

• (A) Wireless LAN connecting adapter
• (B) Installation manual
• (C) Holder
• (D) Wire harness
• (E) Cable tie with base
• (F) Switch box
• (G) PCB

BRP069B44

• (A) Wireless LAN connecting adapter
• (B) Installation manual
• (C) Holder
• (D) Wire harness
• (E) Cable tie with base
• (G) PCB

BRP069B45

• (A) Wireless LAN connecting adapter
• (B) Installation manual
• (D) Wire harness

Safety Precautions

The English text is the original instruction. Other languages are translations of the original instructions.

The following describes the meanings of pictorial symbols used in this documentation.

Give this installation manual to the customer when installation is completed.

To conduct a test run of the air conditioner, follow the installation manual for the air conditioner unit.

The protection of appliances marked with this symbol [double square] is ensured by double insulation and does not require a safety connection to electrical earth (ground).

Warning: Situations which could result in death or serious injury.

When installing:

• ! Request installation by your dealer or a technician. (Can cause electric shock or fire.)
• Always use the accessories and specified parts for installation. Be sure to follow the directions in this installation manual. (Can cause the unit to fall, electric shock or fire.)
• Electrical work should be carried out in accordance with the installation manual and the national electrical wiring rules or code of practice.
• Always turn off the power supply when installing. (Touching the electrical parts can cause an electric shock.) The main switch of the installation is at the outdoor unit. Please switch off this main switch to turn off the power supply.

When using:

• ? Do not disassemble, modify, or repair. (Can cause fire, electric shock or injury.)
• Do not handle this product with wet hands. (Can cause electric shock or fire.)
• Do not allow this product to get wet or use it when bathing or doing similar activities with water. (Can cause electric shock or fire.)
• Do not use this product near medical equipment or persons using cardiac pacemakers or defibrillators. This product may cause life-threatening electromagnetic interference.
• Do not use this product near auto-control equipment such as automatic doors or fire alarm equipment. (Can cause accidents due to erroneous equipment behavior.)
• ! Immediately disconnect the air conditioner power plug if there is abnormal odor or sound, when it is overheating, or smoking. (Can cause fire or malfunction.) Request an inspection by your dealer.
• Disconnect the air conditioner power plug if the product was dropped or the case is damaged. (Can cause fire or electric shock) Request an inspection by your dealer.

Caution: Situations which could result in damage or physical injury.

When installing:

• ? Do not install where flammable gas leaks can occur. (Can cause fire.)
• ! Grip the connector when disconnecting the connecting cord. (Otherwise fire or electric shock can occur.)

When using:

• ? Do not use where small children can get access. (Can cause injuries.)
• Do not use this product near a microwave oven. (This can affect Wireless LAN communications.)

Disposal Requirements

Your product is marked with this symbol [crossed-out bin]. This symbol means that electrical and electronic products shall not be mixed with unsorted household waste.

Do not try to dismantle the system yourself; the dismantling of the product and of other parts must be done by a qualified installer in accordance with relevant local and national legislation.

Product and waste must be treated at a specialized treatment facility for re-use, recycling and recovery.

By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health. Please contact the installer or local authority for more information.

Main Components

Wireless LAN Connecting Adapter

RUN lamp (orange): lights when connecting to a router (Wireless LAN access point).

AP lamp (yellow): lights when connected directly to a smart phone.

SETUP button: Use when connecting to a router (Wireless LAN access point).

MODE button: switches modes (RUN/AP) when held down.

POWER button: turns the WLAN adapter ON or OFF when pressed.

Basic Parameters

• Frequency range: 2400 MHz–2483.5 MHz
• Radio protocol: IEEE 802.11b/g/n
• RF channel: 1–11
• Output power: 0 dBm~18 dBm
• ERP: 17 dBm (11b) / 13 dBm (11g) / 12 dBm (11n)
• Power supply: DC 14 V / 100 mA

RF channel: Radio frequency channel

ERP: Effective radiated power

Applicable Indoor Units

For more details about installation of Wireless LAN adapter and applicable units visit app.daikineurope.com.

Installation

Warning: Always turn off the power supply when installing. (Touching the electrical parts can cause an electric shock.) The main switch of the installation is at the outdoor unit.

1 Choosing and Installation Site

The WLAN adapter should be sited in a place where:

• The adapter is not in the path of direct sunlight.
• The adapter is away from the source of heat or steam.
• There is not source of machine oil vapour (this may shorten indoor unit life).
• The adapter is at least 1 m away from any television or radio set (unit may cause interference with the picture or sound).
• Distance between the indoor unit and the WLAN adapter is within length of WLAN cable.

2 Remove the Adapter Case (Upper)

Remove the upper case of the wireless LAN adapter.

Diagram Description: An exploded view shows the wireless LAN connecting adapter with the upper case being removed, revealing the printed circuit board inside. The upper and lower parts of the adapter case are labeled.

3 Attach Connecting Cord to the Product

Attach the connecting cord connector (white).

• Fasten the connecting cord to the notch in the adapter case (lower).
• Connect the connector to the same color.

Diagram Description: A close-up view shows the connection of the white connector to the adapter. Another diagram shows how to fasten the connecting cord to prevent external force transmission.

4 Return the Adapter Case to its Original State

Snap the top of the upper case onto the clip at the top of the lower case and press to close the box.

Diagram Description: The diagrams show how to align and snap the upper adapter case onto the lower case. A close-up view indicates checking that the connecting cord is securely fastened. Another diagram shows fixing the upper adapter case with two screws.

Fix the upper adapter case with 2 screws located in the accessory set.

5 Installation of Wireless LAN Adapter

BRP069B41/B45

Install WLAN adapter inside the indoor unit. For more details about installation of WLAN adapter to your model please visit app.daikineurope.com.

BRP069B42/B43/B44

Install the WLAN adapter outside the indoor unit. There are two ways of installation A and B.

TYPE A

Position of the WLAN adapter on the wall/surface is fixed by screws. In this case, double-face tapes located in the accessory set are not necessary to fix the holder.

1. Fix the WLAN holder on the wall/surface with 2 screws located in the accessory set.
2. Attach the WLAN adapter to the holder by sliding into it.

For more details about installation of WLAN adapter to your model please visit app.daikineurope.com.

Diagram Description: The diagram shows the WLAN holder being attached to a wall with screws, and the adapter sliding into the holder. Labeled parts include "Holes for screws" and "Holder".

TYPE B

Position of the WLAN adapter on the wall/surface is fixed by double-face tapes. In this case, screws located in the accessory set are not necessary to fix the holder.

1. Attach two double-face tapes located in the accessory set to the back side of the holder as shown below.
2. Fix the WLAN holder on the wall/surface with the double-face tapes.
3. Make sure that the holder is fixed to the wall/surface enough to bear the WLAN adapter.
4. Attach the WLAN adapter to the holder by sliding into it.

NOTE: Wall/surface should be clean and degreased before attaching of the WLAN holder by double-face tapes.

For more details about installation of WLAN adapter to your model please visit app.daikineurope.com.

Diagram Description: The diagram shows double-face tape being applied to the back of the holder, which is then affixed to a wall. The adapter slides into the holder. Labeled parts include "Double face tape" and "Holder".

6 Functionality Check

Turn on the power supply and check that the [RUN] lamp of the product blinks.

Diagram Description: The diagram shows the adapter with the RUN lamp highlighted. A note indicates to always attach the adapter case (top) when turning on the power.

Configuration

The customer is responsible for providing the following:

• Smartphone or tablet PC (For minimum supported version of Android and iOS, please check app.daikineurope.com.)
• Internet line and communicating device (Modem/router or similar device)
• Wireless LAN access point
• [Daikin Residential Controller] (No cost)

Installation Method of Daikin Residential Controller

For Android Phones

1. Open the [Google Play].
2. Search for [Daikin Residential Controller].
3. Follow the directions on the screen to install.

For iPhones

1. Open the [App Store].
2. Search for [Daikin Residential Controller].
3. Follow the directions on the screen to install.

Refer to app.daikineurope.com for detailed installation instructions.

Troubleshooting

The following table provides brief descriptions of how to handle trouble or uncertainties when you install the product or make connection settings. Refer to the FAQ on the homepage for more details.

Contact Information

DAIKIN INDUSTRIES CZECH REPUBLIC s.r.o.
U Nové Hospody 1/1155, 301 00 Plzeň Skvrňany, Czech Republic

DAIKIN EUROPE N.V.
Zandvoordestraat 300, B-8400 Oostende, Belgium

CE Marking

Document Reference: 4P481234-1B

Date: 2021.01