VEVOR Pipe Inspection System

WP9600A / 9600A User Manual

Introduction

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. We will not inform you again if there are any technology or software updates on our product.

Attentions

Please read the manual carefully before using it.
Handle it carefully during operation; avoid throwing it down or pressing it heavily.
Please keep distance from the system when charging.
After use, turn off the display and pull out all connection joints.

Product Description

1. Colorful TFT LCD Screen.
2. High-resolution camera with a clear picture.
3. Night vision capability.
4. High-quality special cable: waterproof, anti-corrosion, cold-resistant, and tensile.
5. 12V 4500MA lithium battery.
6. Sun-visor for use in bright outdoor environments.
7. Range of Application: Water-supply pipes, air-conditioner pipes, cable pipes, pipeline vacuum systems, plumbing pipes, buildings, and sunken pipes.
8. Operating Temperature: -10°C to 60°C.

Product Specifications

Item	Parameter
Charger	AC100-240V DC12.6V 1000MA
Battery	Lithium battery 12V4500MA
Continuous use time for battery	Approximate 6 hours
Investigation depth	50m, 70m, 91.5m, 120m (selectable line length)
Material	Fiber tube with high intensity
Camera light source	High white light (adjustable)
Camera material	Stainless steel
Menu languages	Multi-language
Camera picture	Colorful

Product Components

1. Camera

The camera unit features:

1. Metal Contact Chip
2. Spring
3. Highlight White LED (12 LEDs)
4. Camera Lens

Camera Specifications:

Item	Parameter
Camera diameter	23 mm
Compatible with tube diameter	Greater than 25mm
Camera light source	12 LED with high white light (adjustable)
Camera working voltage	5V
Lights' working voltage	12V
Waterproof rating	IP68
Camera material	Stainless steel
Camera size	143 mm * 23 mm
Camera protective cover parts material	Plastic-steel
Camera protective cover parts size 1	29mm * 40mm
Camera protective cover parts size 2	40mm * 90mm

2. Coil

The coil unit includes:

Cable Length Scale: Displays the current cable length deployed.
Fixed Buckle: Secures the cable wheel.

This is a SPECIAL DETECTION CABLE FIXER, a useful tool for managing the cable.

3. Cell Box (Monitor Unit)

The control box (monitor unit) has the following controls and indicators:

1. Monitor Video Output
2. Power of Monitor (On/Off)
3. Adjacent Coil Plug (Connects to the camera cable reel)
4. AV Output
5. Battery Indicator
6. Power Input for Charger
7. Light-Degree Adjustment for White Light LED
8. Power Switch
9. Power Light Indicator

System Installation

Vital: Turn off the power switch before connecting the video camera and the monitor to prevent damage.
Connect the camera cable to the coil plug, then connect the coil to the cell box (monitor unit). Refer to the connection diagram (described as Picture 1).
Turn on the power switch on the cell box. The monitor's indicator light will turn on, and the system will start.
Install the video camera with its protective cover and carefully insert it into the pipe. Rotate the coil to deploy the cable to the desired depth.
Adjust the LED light intensity using the light-degree adjuster for optimal illumination. For recording video, refer to the DVR operation details (Display Operation: Recording Type).
Video output can be switched to a larger screen via the video line.
After use, carefully remove the camera from the pipe. Clean it with a clean, soft, and dry cloth before storing.

Connection Diagram Description (Picture 1): The diagram illustrates the connection sequence: Camera cable connects to the coil, the coil connects to the cell box (monitor), and the monitor displays the video.

Charging the Battery

When the battery power is low, follow these steps to charge:

Remove the battery and charger from the carrying case.
Connect the charger to the battery.
Connect the charger to a 100-240V AC power outlet. The red indicator light signifies charging.
The green indicator light signifies that charging is complete.

Notes: To ensure a longer battery lifespan, recharge the battery promptly when low. Failure to do so may render it unable to recharge.

Troubleshooting

Problem	Solution
Blue screen displayed	Check if the camera interface is loose, causing poor contact. Verify the cable and power supply connections are secure and normal. Ensure the monitor is properly connected to the power supply. Check for a broken cable. Inspect for water ingress at the camera front or camera damage. Always use the protective cover on the camera to prevent damage from collision with hard objects.
Problems with LED lights	Refer to the manual and confirm the correct procedure for turning on the lights. Check for water ingress at the camera front, which may prevent LEDs from illuminating.
Not running	Check if the battery power is sufficient. Inspect the display screen for damage. Confirm the display screen is properly connected to the power supply.
Photo/video cannot be saved	Check if the memory card is damaged and replace it if necessary. Inspect the memory card slot for foreign objects or deformation.
Cannot format memory card	The memory card is damaged. Replace the memory card.
Unable to charge	Check the charging port for foreign objects or deformation. Verify the charger is not damaged. If the battery is too low, it must be charged in time to prevent it from becoming unchargeable due to excessive discharge.
Broken cable	It is recommended to use the cable on pipes with a diameter of 60cm or less. Pay attention to the force applied when pushing the cable to avoid breaking the detection line. This product is intended solely for pipeline detection and inspection and cannot be used for other purposes.
Cable knotting	When retracting and releasing cables, ensure they do not cross or knot. The bending radius of the cables should not be less than 90 degrees. When retracting the cable, cooperate with the rotating reel to wind it orderly; do not use excessive force.
Equipment cleaning	Turn off the power before cleaning to avoid damaging the equipment.

Warning: If a fault cannot be resolved, do not attempt to disassemble the unit yourself. Contact after-sales service personnel.

Operating Instructions for HD DVR

Button Functions:

REC/-: To start/stop recording.
Play/+: To switch between recording and photographing modes (indicated by an icon in the top left corner).
MENU: To access and loop through the settings main menu. Long press to rotate the screen by 0, 90, 180, or 270 degrees.
>: [Zoom Out]
<: [Zoom In] the image (0-36X zoom range).
POWER: To power on/off the display screen.

1. Main Menu Settings

Press the MENU button to access the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO.
Press the </> buttons to navigate sub-menus.
Press the REC button to adjust setting values or to enter/confirm a selection.
Press the PLAY button to exit.

2. Recording and Photographing

Press the PLAY button to switch between Recording and Photographing modes (indicated by an icon in the top left corner).
Press the REC button to start recording or photographing. Press REC again to stop.

3. Photo Playback on Monitor

Press the MENU button repeatedly until PHOTO is selected.
Press the </> buttons to find Playback.
Press REC to enter playback mode. Use </> to select a photo, then press REC to play it.
Press PLAY to exit playback.

4. Video Playback on Monitor

Press the MENU button repeatedly until RECORD is selected.
Press the </> buttons to find Playback.
Press REC to enter playback mode. Use </> to select a video, then press REC to enter.
Press REC to start playback.
Press PLAY to exit playback.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU Environmental Protection

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.

	VEVOR Pipe Inspection System User Manual WP9600A/9600A This user manual provides detailed instructions for operating the VEVOR Pipe Inspection System, Model WP9600A/9600A. It covers product features, specifications, system installation, charging, troubleshooting, and DVR operation. Includes safety precautions and environmental compliance information.
	VEVOR Pipe Inspection System User Manual User manual for the VEVOR Pipe Inspection System, covering product description, specifications, system installation, troubleshooting, and operating instructions for the HD DVR.
	VEVOR WP9600A Pipe Inspection System User Manual - Features, Specifications, and Operation Comprehensive user manual for the VEVOR WP9600A Pipe Inspection System, covering features, specifications, installation, operation, and troubleshooting. Includes detailed instructions for use.
	VEVOR Sewer Camera System Dimensions and Specifications Detailed dimensions and specifications for the VEVOR Sewer Camera System, model WPPEDOFTIR DC 12V and DDWKXSGDNK950S9AFV1. This pipeline inspection camera features a 512Hz locator, DVR function, IP68 rated camera, and adjustable LEDs.
	Pipe Inspection System Instruction Manual Instruction manual for the Pipe Inspection System, detailing its features, specifications, and usage instructions for various camera types and monitor options. Includes charging and system installation guidance.
	VEVOR Sewer Inspection Camera for Drain Pipe Diagnostics Discover the VEVOR sewer inspection camera, an essential tool for plumbing professionals and homeowners to inspect drains and pipes, identifying blockages and damage efficiently.
	VEVOR WP9612FT Pipe Inspection System Instruction Manual Comprehensive instruction manual for the VEVOR WP9612FT Pipe Inspection System, detailing features, specifications, installation, operation, and troubleshooting for effective drain and pipe inspection.
	VEVOR WP9604B Pipe Inspection System Instruction Manual Comprehensive user manual for the VEVOR WP9604B Pipe Inspection System. Covers product features, specifications, operation, installation, charging, troubleshooting, and FCC information for effective plumbing and drain inspections.