Yeelight Light Pro 320 Ceiling Light
Operating Instructions
Product Description
This section details the components and accessories included with the Yeelight Light Pro 320 ceiling light.
Diagrams:
- Front View: Shows the front of the lighting unit.
- Mounting Points: Illustrations indicate holes for mounting screws, cable entry, and the back of the lighting body.
- Internal Components: Depicts the control board and mounting holes for the cassette and threaded wire.
Included Accessories:
- Self-tapping screw x 2
- Wall anchor x 2
- Metric screw x 2
- Remote control x 1
Installation Instructions
Step 1: Prepare the Base
Open the package and remove the lamp holder. Press the safety switch inside and remove the base.
⚠️ For your safety, it is recommended to have an electrician perform the installation. Disconnect the power supply before installation to avoid electric shock. Failure to follow instructions may lead to fire, electric shock, or the fixture falling.
Step 2: Mount the Base
Method A (Recommended):
- Using a 6 mm impact drill, drill two mounting holes in the ceiling, with a diameter of at least 25 mm.
- Insert the wall anchors into the drilled holes.
- Pass the power cable through the wiring hole.
- Secure the base to the ceiling using the self-tapping screws, ensuring it is firmly attached.
Method B:
- Verify that both mounting points of the lamp holder insert are intact.
- Pass the power cable through the wiring hole.
- Secure the base to the lamp holder socket using the self-tapping screw, ensuring it is firmly attached.
The wiring hole is suitable for 1.5 mm² to 2.5 mm² power cables. Strip 11-13 mm of the power cable.
Connect the wires to the lamp holder socket:
- Neutral wire (N)
- Live wire (L)
- Ground wire (O)
(When connecting the live wire, press the red button in the wire hole before pulling the wire through.)
Connect the power supply as shown in the diagram and verify the connection is secure.
⚠️ This product must be grounded.
Step 4: Attach the Lamp Body
Hold both edges of the lamp body with both hands. Align the lamp body with the base and gently push both sides upwards simultaneously until you hear a click. Once installed, rotate the lamp body left and right and pull up and down to ensure the safety lock is engaged.
(Diagrams show rotating the lamp body left/right and pulling up/down.)
⚠️ After installation, ensure the light is properly seated. Improper installation may lead to the product falling.
Quick Configuration with the Yeelight App
1. Download the App: Search for the Yeelight app on the App Store or Google Play, or scan the QR code to download and install it.
2. Add Your Device: Open the Yeelight app, tap the "+" icon in the top right corner, and follow the on-screen instructions to add your device.
Apple HomeKit Control
1. Open Home App: Launch the Home app on your iPhone or iPad.
2. Add Accessory: Tap the "+" button and follow the app's instructions. Scan the QR code located on the product or enter the eight-digit code provided.
- Ensure your Wi-Fi network is available and connected to the internet. This product is not compatible with 5GHz networks.
- For optimal HomeKit compatibility, iOS 9.0 or later is recommended.
- HomeKit codes are found on the bottom of the device and may need to be reset. Apple is a trademark of Apple LLC.
The "Works with Apple" badge signifies that the accessory is designed for specific Apple technologies and meets Apple's performance standards. Apple is not responsible for the operation or compliance of this equipment. HomeKit is a trademark of Apple Inc.
Factory Reset
Turn the light on and off 5 times using the wall switch (wait 2 seconds after turning on and 2 seconds after turning off). After 5 seconds, the light will restart, restoring factory settings.
For new network environments, reset the light to factory settings before connecting.
Specifications
- Model: YLXD76YL, YLXD76YL-B
- Color Temperature: 2700K-6500K
- Operating Temperature: -10° C to +25° C
- Operating Humidity: 0-85% RH
- Luminous Flux: 1500lm@4000K
- Efficiency: 0.9
- Rated Power: 23 W (48 x 1 W/LED module)
- Operating Frequency: 2412-2472MHz (Wi-Fi), 2402-2480MHz (BT)
- Maximum Output Power: 17.21 dBm (Wi-Fi), 5.08 dBm (BT)
- Rated Power: 220-240V ~ 50/60Hz
- Compatibility: Android 4.4 and iOS 9.0 or later
- Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE
This product contains a light source with energy efficiency class <F>. Replaceable (LED only) light source must be handled by a professional.
Product Features:
- ?️ Color Temperature Control
- ? Brightness Control
- ? Night Mode
- ? High Color Rendering Index (CRI)
- ? Smart Scene
- ? Intelligent Control
- ? Remote Control
- ⬆️ Software Update
Safety Measures
- Before use, ensure the voltage matches the product's operating voltage. Incorrect voltage can damage the product and pose a safety risk.
- The light source in this luminaire can only be replaced by the manufacturer or their service department.
- The ceiling light generates heat during operation. Ensure adequate ventilation for heat dissipation.
- The light can be controlled via remote control and smartphone software. Turning off the light does not interrupt power. Do not touch, replace, or disassemble the light when powered off, as this risks electric shock or injury.
- Installation must be performed by a qualified electrician, with all wiring complying with IEEE or national electrical standards.
- Maintain a distance of at least 20 cm between the antenna and the user's body during normal operation.
- For indoor use only.
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXD76YL&YLXD76YL-B complies with Directive 2014/53/EU.
Simplified Declaration of Conformity
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd
Address: 10F-B4, Building B, International Innovation Park, 1 KeYuanWeiYi Road, Laoshan, Qingdao, Shandong Province, People's Republic of China
Product: Yeelight Light Pro 320
Model: YLXD76YL, YLXD76YL-B
Radio Frequency: 2412-2472MHz (Wi-Fi), 2402-2480MHz (BT)
Maximum Radio Frequency Power: 17.21dBm (Wi-Fi), 5.08dBm (BT)
This product complies with Directive 2014/53/EU of the European Parliament and of the Council of April 16, 2014, concerning radio equipment. The declaration of conformity is available at: https://files.innpro.pl/Yeelight
Additional Product Information
Environmental Protection
Dispose of electronic waste according to EU directives. Separate collection and recycling prevent environmental and health damage. Consult your local municipality or retailer for disposal information.
The product complies with EU New Approach Directives concerning user safety, health, and environmental protection.
Li-Ion Battery
The device contains a Li-Ion battery that ages over time. The manufacturer's stated operating time is based on optimal laboratory conditions. Actual performance may vary. To maximize battery life, avoid discharging below 3.18V or 15% capacity. Discharging below 2.5V will cause permanent damage (not covered by warranty). If not used for over a month, charge the battery to 50% and check every two months. Store in a dry place away from direct sunlight and extreme temperatures.
LIPO Battery
(Note: This section appears to be a duplicate of the Li-Ion battery information in the source document.) The device contains a Li-Ion battery that ages over time. The manufacturer's stated operating time is based on optimal laboratory conditions. Actual performance may vary. To maximize battery life, avoid discharging below 3.18V or 15% capacity. Discharging below 2.5V will cause permanent damage (not covered by warranty). If not used for over a month, charge the battery to 50% and check every two months. Store in a dry place away from direct sunlight and extreme temperatures.
Maintenance
Regular maintenance (cleaning) is required by the user or authorized service centers. If the manual lacks specific maintenance details, assess the product's condition weekly for deviations from new. Address any identified deviations promptly with cleaning or service measures.
Improper maintenance or failure to address anomalies can lead to permanent product damage. The guarantor is not liable for damages due to negligence.
Precautions
- Ensure device contacts are clean before charging.
- Never leave the device unattended during use or charging.
- Ensure the device can be quickly disconnected from the power source in emergencies.
- Avoid exposing the device to high temperatures.
- Charge in a dry, well-ventilated area, away from flammable materials, at least 1 meter from other objects.
- Do not cover the device while charging.
- Only use manufacturer-approved power adapters, charging stations, and cables.
- The device contains cells that are difficult to extinguish; keep a fire extinguisher nearby.
Detailed warranty information is available at: https://serwis.innpro.pl/gwarancja
