Yeelight Ceiling Light C2001S500

Product Description

Light Body Views

Front view of light body: A rectangular outline representing the front of the ceiling light.

Reverse view of light body: Shows the rear of the fixture with a 'Lock switch' mechanism.

Base Plate Details

Base plate: A circular mounting plate with labeled holes: 'Self-tapping screw mounting hole', 'Wiring hole', 'Holder mounting hole', and 'Threading hole'.

Included Accessories

• 2 x Self-tapping screw ?
• 2 x Expansion tube ?
• 2 x Metric screw ?
• 1 x Remote control ?

Mounting Instructions

Step 1: Prepare the Light

Open the package and take out the ceiling light. Push the lock switch inward and remove the base.

⚠️ Safety Warning: To avoid danger, please ask an electrical professional to perform mounting or maintenance.

⚡ Caution: Before mounting, disconnect the power supply to prevent electric shock. Mounting should be performed in strict accordance with the instructions. Improper mounting is liable to cause accidents such as fall, fire, and electric shock.

Step 2: Mount the Base

Method A (Recommended)

Use an impact drill (6 mm diameter) to make two mounting holes (≥ 25 mm deep) in the wall. Insert the expansion tubes into the holes. Thread the power cord through the wiring hole. Use self-tapping screws to fix the base securely to the ceiling.

Method B

Check that the two mounting points on the light box are intact. Thread the power cord through the wiring hole. Use metric screws to fix the base to the light box on the ceiling, ensuring it is securely mounted.

Wiring and Final Mounting

Step 3: Wiring

The wiring hole is suitable for power leads with a cross-sectional area of 1.5-2.5 mm². Strip the power cord by 11-13 mm. Connect the neutral (N), ground (G), and live (L) wires to the corresponding wiring holes. (When unplugging, press the red button on the wiring hole first). Arrange the power cord neatly and check for firm wiring.

⚠️ Important: This product must be grounded.

Step 4: Attach the Light Body

Hold both sides of the light body with both hands, being careful not to press the light-emitting surface. Align the light body with the fixed base and gently push both sides upwards simultaneously. Mounting is complete when you hear a "click" sound.

Step 5: Secure the Mounting

After mounting, rotate the light body left and right and pull it up and down to ensure the lock switch is securely engaged.

⚠️ Note: Always check for proper mounting after completion. Improper mounting may cause the product to fall.

Connect to Yeelight App

This product can be controlled via the Yeelight App and integrated with other Yeelight products.

Download App

Search for "Yeelight" in an app store or scan the QR code [QR Code Placeholder] to download and install the app.

Add Device

• Go to the Yeelight App homepage and tap "+" in the upper right corner to add your device.
• Follow the on-app instructions for configuration.
• Once added successfully, the device will appear in the device list.

Note: App procedures may vary due to updates. Follow the latest on-app instructions.

The product also supports control via Mi Home, Google Home App, and Amazon Alexa. Download and configure these apps as instructed to control the light.

Apple HomeKit Smart Control

1. Open the Home app on your iPhone or iPad.
2. Tap "Add Accessories" and follow instructions to scan the QR code (found on the manual's back cover or junction box) or enter the 8-digit setup code.

⚠️ Requirement: A Wi-Fi network with internet access is required (5 GHz networks are not supported).

For HomeKit control, iOS 9.0 or above is recommended. The HomeKit setup code is essential for adding the device, especially after factory resets. If the manual is lost, the QR code or setup code can be found on the junction box.

iPad and iPhone are trademarks of Apple Inc.

Restore to Factory Settings

To restore factory settings, use the wall switch to turn the ceiling light on and off five times consecutively (turn off, wait 2 seconds, turn on, wait 2 seconds – this sequence counts as one time). The light will start breathing and automatically restart after five seconds, indicating factory settings have been restored.

Note: If connecting to a new network environment, factory settings must be restored first.

Use the Remote Control

Ensure the remote control and ceiling light are in the same room. Turn on the light and within 60 seconds, press and release the "OFF" and "M" buttons simultaneously on the remote. The remote's indicator light will flash, signifying the connection process. Connection is successful when the light flashes cyclically.

Remote Control Functions:

• ON: Light on ▶️
• OFF: Light off ⏹️
• M: Daylight/moonlight mode ?
• Sun Icon: Adjust color temperature ?️
• +: Increase brightness ?
• -: Reduce brightness ?

Specifications

Model: YLXD038

Power Factor: 0.9

Operating Temperature: 25° C

Operating Humidity: 0-85% RH

Color Temperature: 2700–6500 K

Rated Input: 220-240V ~ 50/60Hz Max. 0.23A

Rated Power: 50 W (84 × 1 W/LED module)

Compatibility: Android 4.4 & iOS 9.0 or above

Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE

Operating Frequency: 2412-2472 MHz (Wi-Fi), 2402-2480 MHz (BT)

Maximum Output Power: 17.21 dBm (Wi-Fi), 5.08 dBm (BT-LE)

Product Features

• Adjustable color temperature ?️
• Adjustable brightness ?
• Cozy moonlight ?
• High color rendering index ✨
• Voice control ?
• Quick setup ⚙️
• Smart interaction ?
• Firmware upgrade ⬆️

Precautions

• Ensure voltage consistency with the ceiling light's operating voltage to prevent damage and safety hazards.
• Do not replace the light source yourself; only the manufacturer, service agent, or a qualified electrician should perform replacements.
• The ceiling light generates heat; ensure adequate ventilation for heat dissipation.
• Control via app or remote does not disconnect power. Do not touch, replace, or disassemble the light while powered, as this may cause electric shock, injury, or death.
• Installation requires a qualified electrician, and wiring must comply with IEEE electrical standards.
• Install in a stable location to prevent falling.
• Maintain a separation distance of at least 20cm between the antenna and the user's body during normal use.
• For indoor use only.
• The light source shall only be replaced by the manufacturer or his service agent or a similar qualified person.

EU Declaration of Conformity

Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXD038 complies with Directive 2014/53/EU.

WEEE Disposal and Recycling

♻️ This symbol indicates waste electrical and electronic equipment (WEEE). Do not mix with unsorted household waste. Protect human health and the environment by handing over waste equipment to a designated collection point for recycling. Correct disposal prevents negative environmental and health consequences. Contact local authorities for collection point information.