M-WAVE Torque Wrench TW-4/24
1) Parts Description
- ① Tool-head
- ② Reversible lever
- ③ Quick release button
- ④ 1/4" Drive
- ⑤ Viewing window
- ⑥ Cursor
- ⑦ Scale
- ⑧ Knob
Description of the torque wrench with numbered parts.
Specifications
Torque range: 4 - 24 Nm in 0.2 Nm increments
Bit sockets included: Hex 3/4/5/6/8 mm, Star T10/25
Visual representation of available bit sockets.
2) Instruction
- Set the required direction of rotation at the reversible lever ②.
- Put the required bit socket on the 1/4" drive ④.
- Set the required torque by turning the knob ⑧ as shown in the examples:
Picture 1: Setting torque to 9.6 Nm (8 Nm + 1.6 Nm).
- a) Press the knob ⑧ and turn clockwise until "8" is aligned with the cursor ⑥ in the viewing window ⑤, and "0" on the scale ⑦ is aligned with the indicator on the handle.
- b) Continue to turn the knob ⑧ clockwise until "1.6" on the scale ⑦ is aligned with the indicator on the handle. The set torque is 9.6 Nm (8 Nm + 1.6 Nm = 9.6 Nm).
- Tighten the wrench on the bolt or nut until a "click" sound is heard and the tool-head ① eases (Picture 2). Release force immediately.
Picture 2: Demonstrating the click mechanism and release of force.
3) Notice
- The torque wrench has been calibrated to be accurate to ± 6%.
- Before first use or after prolonged disuse, repeat setting the torque to the highest value 5-10 times to ensure internal components are lubricated.
- Always set the torque to the lowest value when the wrench is not in use.
- Keep the torque wrench clean and do not immerse it in any liquid.
- Do not apply force after the preset torque is reached, as this may damage the workpiece or the wrench.
- Do not disassemble the torque wrench. Contact your local distributor for any issues or calibration requirements.
- This is a high-precision measuring instrument and should not be used as a regular ratchet.
Messingschlager
Hassbergstr. 45
96148 Baunach - Germany
Art. 880291
