M-WAVE Art. 122414 Bicycle Rear Rack Bag Manual
Article Number: 122414
How to Attach and Detach the Bag
This section provides instructions for mounting and removing the M-WAVE bicycle bag using its Quick Release (QR) system.
- Attach the QR system to the carrier as shown.
Visual Description: Illustration shows a bicycle rear rack with attachment points and bolts for securing a bag.
- Push the bag forwards into the lower part of the QR system and push it down until it clicks into place.
Visual Description: Illustration shows a hand attaching a black M-WAVE bicycle bag to a bicycle rear rack. The bag slides forward and down onto the rack's QR system until it clicks.
- The bag is now securely attached to the carrier.
- To release, press the red button, lift the bag at the rear and pull it out.
Visual Description: Close-up illustration of the bag's quick-release mechanism. A finger presses a red button on the bag's mounting bracket, indicating release. Arrows show lifting the rear of the bag to detach it from the rack.
Usage and Safety Information
Maximum Load: Do not exceed the maximum load of the bag (10 kg).
Caution: Check for secure fit and possible damage before every journey. Do not use if there is visible damage.
⚠️ (Warning symbol)
Care Instructions
Wipe with a soft, damp cloth and mild soap solution. Do not use solvents, harsh cleaners or alcohol (may damage EVA). Allow the bag to air dry after cleaning; do not place on a heater.
Caution: Do not machine wash, do not bleach, do not iron, do not dry clean, do not tumble dry.
Distributor Information
Keep for future reference!
Distributed by:
Messingschlager GmbH & Co. KG
Hassbergstr. 45
96148 Baunach - Germany
www.messingschlager.com
Document Date: 07/2025
ℹ️ (Information symbol)
