TRÅDFRI 10W Driver for Wireless Control
Introduction
This document provides instructions for the IKEA TRÅDFRI driver for wireless control. It is designed to work with the TRÅDFRI gateway or DIRIGERA hub.
To get started, download the IKEA Home smart app from the App Store or Google Play. The app will guide you through the process of installing your product and other devices.
How to Steer Your Lighting
Once the product is connected to the mains, it can be turned ON/OFF using the main switch or a foot switch. For dimming or connecting to other IKEA Home smart products, a separate steering device (e.g., a remote control) is required.
The steering device needs to be paired with your wireless product. If you have multiple wireless products, you can pair each one with the steering device to control the entire combination simultaneously.
Pairing a Steering Device to Your Product
- Connect at least one (1) product to the mains power before pairing. Ensure the mains power is turned ON.
- Locate the pairing symbol on the LED driver. Hold the steering device close to the pairing symbol (no more than 5 cm away).
- Press and hold the pairing button on the steering device for at least 10 seconds. A red LED light will shine steadily on the steering device. The product will dim and flash once to indicate successful pairing.
How to Factory Reset Your Driver
If the product does not respond or you wish to un-pair it from a steering device, a factory reset may be necessary. To force a factory reset, carefully push and hold the small button (marked RESET) on the LED driver enclosure with a pen tip, applying slight pressure.
Important Information
- The product is for indoor use only.
- It can be used in temperatures ranging from 5°C to 45°C.
- Do not leave the product in direct sunlight or near any heat source, as it may overheat.
Technical Specifications
- Type: ICPSHC24-10CN-IL-2
- Input: 220-240 VAC, 50/60 Hz, 0.1 A
- Output: 24.0V DC
- Max total load: 0.42A, 10.0 W
- Radio range: 10 m in open air.
- Operating frequency: 2400-2483.5 MHz
- Output power: 12 dBm
Note: Indoor use only.
Care and Maintenance
To clean the unit, wipe with a dry soft cloth. Never use abrasive cleaners or chemical solvents, as this can damage the product.
Product Servicing: Do not attempt to repair this product yourself. Opening or removing covers may expose you to dangerous voltage points or other risks.
Save these instructions for future use.
Disposal Information
The crossed-out wheeled bin symbol ?️ indicates that the item should be disposed of separately from household waste. It must be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating this item, you help reduce waste sent to incinerators or landfills and minimize potential negative impacts on human health and the environment. For more information, please contact your IKEA store.
Manufacturer Information
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
