MinION Mk1D Quick Start Guide

Pre-installation

Before using the MinION Mk1D, familiarize yourself with the following resources:

For detailed information and troubleshooting, please refer to the user manual.

Getting Started

The MinION Mk1D package includes:

MinION Mk1D device
Configuration Test Cell (CTC)
USB-C cable

Note: Only USB-C ports are supported. USB-A ports are not supported.

Setup Steps

Install and log in to MinKNOW: Check your computer meets the IT requirements, install the latest MinKNOW software from community.nanoporetech.com/downloads, and log in using your Oxford Nanopore account details.
Connect the MinION Mk1D: Connect the device to your computer using the provided USB-C cable.
Insert your CTC: Lift the lid of the MinION, insert the Configuration Test Cell (CTC), ensure it is firmly pressed, and then close the lid.
Perform a hardware check: A hardware check is crucial before your first sequencing run. Follow the instructions within MinKNOW to initiate and complete the hardware check. If the check fails, ensure the CTC is properly inserted and try again.

Nanopore Community

Discover protocols, forums, support, and downloads for your experiments on the Nanopore Community.

Tip: Learn how to analyze your nanopore data at nanoporetech.com/analyse.

Additional Information

Warranty: Purchase licenses and warranties at store.nanoporetech.com/device-warranty.html. For flow cell warranty, visit community.nanoporetech.com/to/warranty.
Recycle used flow cells: Oxford Nanopore is committed to environmental sustainability. Find out how to send your flow cells for recycling at community.nanoporetech.com/support/returns.
Place your next order: Buy consumables at the Oxford Nanopore Store: store.nanoporetech.com.
Documentation: Access device documentation on the Nanopore Community: community.nanoporetech.com/docs.
Support: For customer and technical support, visit community.nanoporetech.com/support.

Technical Specifications

Specification	Details
Model number	MIN-101D
Supply voltage	5 DC
Maximum rated current	1.5 A
Maximum rated power	7.5 W
Size (H x W x D)	13 x 55 x 125 mm
Weight	130 g
Installation ports	1 x USB-C
Software installed	MinION driver
Environmental conditions	Designed for sequencing in temperatures of +10°C to +35°C. Functional range: +5°C to +40°C. Requires 5 cm clearance for ventilation. Use within 30%-75% relative non-condensing humidity. Intended for indoor use. Usable up to 2,000 m altitude. Pollution Degree 2.

	PromethION 2 Solo Quick Start Guide A quick start guide for setting up and verifying the PromethION 2 Solo device, including pre-installation checks, device setup, hardware checks, and power-off procedures.
	Direct-from-Colony Microbial Sequencing: Rapid Salmonella Serotyping with Oxford Nanopore A protocol overview for direct-from-colony microbial sequencing of Salmonella using Oxford Nanopore technologies, enabling rapid serotyping and genomic analysis.
	Oxford Nanopore Service Provider Programme: Transform Services with Multiomic Insights Learn how Oxford Nanopore's Service Provider Programme empowers labs to deliver advanced multiomic insights, attract service projects, and scale innovation with their cutting-edge sequencing technology and EPI2ME platform.
	Oxford Nanopore Technologies 2025 Interim Results Presentation - Financial Performance and Strategic Update Detailed overview of Oxford Nanopore Technologies' financial performance for the first half of 2025, including revenue growth, profitability improvements, strategic progress across key markets, and future guidance. Features insights into R&D, operational efficiency, and platform benefits.
	Oxford Nanopore Technologies plc Interim Results H1 2025: Strong Growth and Reaffirmed Guidance Oxford Nanopore Technologies plc announces its interim results for the six months ended 30 June 2025, detailing strong first-half performance, revenue growth ahead of expectations, improved EBITDA, and reaffirmed financial guidance. The report covers operational and strategic achievements, including innovation and partnerships.
	Oxford Nanopore Large Cohort Sequencing Workflow for Clinical Research Accelerate clinical research with Oxford Nanopore's PromethION 24 platform. This guide details a comprehensive workflow for large cohort genomic and epigenomic analysis, from DNA extraction to variant calling.
	Oxford Nanopore Technologies Sustainability Report FY 2024 Discover Oxford Nanopore Technologies' commitment to sustainability with their FY 2024 report, detailing their impact on Product, People, and Planet. Learn about their vision, mission, values, and how their innovative nanopore sequencing technology is driving advancements in science, health, agriculture, and conservation.
	Oxford Nanopore Technologies Annual Report and Accounts 2024 Oxford Nanopore Technologies presents its Annual Report and Accounts for 2024, detailing its vision to enable the analysis of anything, by anyone, anywhere. The report covers financial highlights, operational achievements, market opportunities, and the company's strategic direction in the field of nanopore-based sensing technology for DNA and RNA analysis, as well as proteins and metabolites.