BRAYER Electric Kettle BR6108

Product Description

The electric kettle is intended only for boiling drinking water.

Description of Parts

The electric kettle is illustrated with numbered parts:

• 1. Kettle flask: The main body holding the water.
• 2. Kettle spout: For pouring water.
• 3. Lid: Covers the kettle flask.
• 4. Lid handle: For opening the lid.
• 5. Handle: For holding and carrying the kettle.
• 6. Water level scale: Indicates the water level inside the flask, marked with MIN and MAX levels (e.g., 0.5L, 1.0L, 1.5L, 1.7L MAX).
• 7. ON/OFF button (0/I): Controls power, often with an indicator light.
• 8. Base: The power base for the kettle.
• 9. Cord storage: Located on the base for winding the power cord.

⚠️ ATTENTION! For additional protection, it is recommended to install a residual current device (RCD) with a nominal operating current not exceeding 30 mA. Consult a specialist for RCD installation.

Safety Measures and Operation Recommendations

Read the operation instructions carefully before using the electric kettle and keep them for future reference.

• Use the electric kettle only for its intended purpose as stated in this manual.
• Mishandling the kettle can lead to breakage, harm to the user, or damage to property, and is not covered by warranty.
• The kettle is intended for heating and boiling drinking water only; do not heat or boil other liquids.
• Ensure the operating voltage indicated on the label matches your home mains voltage.
• The power plug has a grounding contact; plug it into a socket with reliable grounding. Grounding reduces the risk of electric shock in case of a short circuit.
• Contact an electrical technician if you are unsure about your socket installation and grounding.
• To prevent fire, do not use adapters designed for connecting plugs to mains sockets without grounding contacts.
• If sparking occurs in the mains socket or a burning smell is detected, unplug the unit and contact your home maintenance organization.
• If smoke appears from the kettle body, unplug the unit and take measures to prevent fire spread.
• Do not use the electric kettle outdoors.
• Using the unit during lightning storms is not recommended.
• Do not place foreign objects on the kettle flask.
• Protect the unit from impacts, falls, vibrations, and other mechanical stress.
• Never leave the plugged-in electric kettle unattended.
• Do not use the electric kettle near a kitchen sink, in bathrooms, near swimming pools, or other containers filled with water.
• Do not use the electric kettle near heating appliances, heat sources, or open flames.
• Do not use the electric kettle in areas where aerosols are used or sprayed, or near flammable liquids.
• Place the electric kettle on a stable, flat, non-slip, non-metal surface, away from heat sources and the edge of the table.
• Do not let the power cord hang from the edge of the table and ensure it does not touch hot surfaces or sharp furniture edges.
• Do not direct the kettle spout at wooden furniture, books, or objects that can be damaged by moisture or hot steam.
• Do not touch the power cord or plug with wet hands.
• Do not switch the kettle on without water; after filling, close the lid tightly.
• Ensure the water level is not above the 'MAX' mark. Exceeding the 'MAX' mark can cause boiling water to splash out.
• To avoid burns from hot steam, do not bend over the kettle spout.
• Do not open the lid while water is boiling.
• The kettle surface can become hot. Handle with caution and use the handle.
• Be careful when carrying the kettle filled with boiling water. Pour water carefully, avoiding sharp tilting, to prevent burns.
• Unplug the kettle before cleaning or when not in use. When unplugging, hold only the plug, not the cord, to prevent damage or short circuits.
• Do not immerse the kettle, base, or power cord in water or other liquids.
• Do not wash the kettle in a dishwasher.
• For child safety, do not leave packaging polyethylene bags unattended.

⚠️ ATTENTION! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• The electric kettle is not intended for use by children.
• Do not leave children unattended to prevent them from using the unit as a toy.
• Do not allow children to touch the unit or power cord during operation.
• Keep the unit out of reach of children during operation and cooling.
• This unit is not intended for use by persons with reduced physical, sensory, or mental capabilities (including children) or those lacking experience or knowledge, unless supervised or instructed by a person responsible for their safety.
• Periodically check the power cord, plug, and kettle body for integrity.
• If the power cord is damaged, it must be replaced by the manufacturer, a service center, or qualified personnel to avoid danger.
• Do not attempt to repair the unit yourself. If a malfunction occurs or after dropping, unplug the unit and contact a service center.
• Transport the kettle in its original packaging.

Before Using the Kettle

After transportation or storage at low temperatures, allow the unit to reach room temperature for at least three hours.

• Unpack the kettle and remove all packaging materials.
• Keep the original packaging.
• Check the delivery set.
• Read the safety measures and operating recommendations.
• Inspect the kettle for damage; do not plug it in if damaged.
• Ensure the power supply voltage specifications on the unit or base match your mains voltage. For 60 Hz mains, no additional measures are needed.
• Wipe the outer surface of the flask (1) with a clean, slightly damp cloth to remove dust.
• Place the base (8) on a solid, steady, flat, non-slip, non-metal surface away from heat sources and table edges.
• Do not place or use the kettle in enclosed spaces (e.g., cupboards) as this can lead to breakage or harm.
• Wash the kettle flask (1) with neutral detergents, rinse, and dry. Wipe the outer surface with a slightly damp cloth, then dry. Do not use abrasives or coarse scourers.
• Before connecting, ensure the flask (1), power cord, and plug are dry.
• Ensure the kettle is switched off (ON/OFF button at '0').
• To fill, remove the kettle from the base (8), open the lid (3) using the handle (4).
• Fill with water up to the 'MAX' mark on the water level scale (6).
• Close the lid (3) tightly.
• Place the filled kettle on the base (8).
• Insert the power plug into the mains socket.
• To switch on, set the ON/OFF button (7) to 'I'; the indicator will light up.

Using the Electric Kettle

• Ensure the ON/OFF button (7) is accessible and not blocked.
• Make sure the kettle is switched off (ON/OFF button at '0').
• To fill, remove from base (8), open lid (3) using handle (4).
• Fill with water up to the 'MAX' mark on the water level scale (6).
• Close lid (3) and place the kettle on the base (8).
• Insert the power plug into the mains socket.
• To switch on, set the ON/OFF button (7) to 'I'; the indicator will light up.
• When water boils, the kettle switches off automatically, and the indicator light goes out. Pour out water and repeat boiling several times for initial use.
• Water from the first boilings is not recommended for consumption but can be used for domestic purposes.
• Before removing the kettle from the base (8), ensure it is switched off (ON/OFF button at '0').
• After switching off, wait 15-20 seconds before re-boiling.
• To switch off, set the power switch (7) to '0'.
• If accidentally switched on with low water level, the automatic thermal switch will turn it off. Unplug, let cool for 10-15 minutes, refill, and switch on.

Cleaning and Maintenance

• Before cleaning, unplug the kettle, empty water, and let it cool down.
• Wipe the outer surface of the flask (1) with a slightly damp cloth, then dry. Use mild detergents; avoid metal sponges, abrasive cleaners, and solvents.
• Keep the mesh filter clean.
• Do not immerse the kettle, base (8), or power cord in water or other liquids. Do not wash in a dishwasher.

Descaling

Scale inside the flask (1) affects water taste, heat exchange, and can damage the heating element. Damage due to excessive scale is not covered by warranty.

• Use special descalers or household agents like vinegar or citric acid.
• Vinegar method: Fill flask (1) 1/3 with water, boil. Open lid (3), add vinegar (6-9%) up to 'MAX' mark. Leave for several hours. After scale dissolves, empty and rinse flask (1) several times. Boil water several times to remove vinegar smell.
• Citric acid method: Dissolve 25g citric acid in 500ml hot water. Fill kettle with solution and leave for 15-20 minutes. After scale dissolves, empty and rinse flask (1) several times, then boil water several times.
• Follow instructions for commercial descalers for kettles or coffee machines.
• Clean the kettle from scale regularly.

Storage

• Before long-term storage, unplug, empty water, and let cool.
• Clean the kettle flask (1).
• Secure the power cord in the cord storage (9) on the base (8).
• Pack in original packaging.
• Store in a dry, cool place, out of reach of children and disabled persons.

Delivery Set

• Electric kettle — 1 pc.
• Instruction manual — 1 pc.

Technical Specifications

• Supply voltage: 220-240 V, ~50-60 Hz
• Rated input power: 2200 W
• Maximum water capacity: 1.7 l

Recycling

To prevent environmental harm or health risks from uncontrolled waste disposal, do not discard the unit or batteries with household waste after their service life. Take them to specialized recycling stations.

Waste generated during product disposal is subject to mandatory collection and disposal.

For more information on recycling, contact your local municipality, household waste disposal service, or the retailer.

The manufacturer reserves the right to change design, structure, and specifications without prior notice, provided these changes do not affect the general operating principles of the unit.

Unit operating life: 3 years.

Manufacturing date is indicated in the serial number.

In case of malfunctions, contact an authorized service center promptly.

♻️ Recycling symbol description: Indicates that the product should not be disposed of with regular household waste.