Overview
This document provides a comprehensive parts list and technical details for the ORBIS ECO 400 floor cleaning machine manufactured by Tacony CFC. It includes breakdowns of major assemblies, part numbers, descriptions, and quantities.
Reference Drawing Numbers:
- Base: 05-4723-0000
- Motor plate: 05-4711-0000
- Handle: 05-4769-0000
- Wiring diagram: 09-1146-0000
Modified By: G kilgour
Service Parts List Issue: 5
Description of Change: BOM adjustments
Main Assembly Parts
The following table lists components for the main assembly:
| Ref. No. | Part No. | Part Description | Qty |
|---|---|---|---|
| 1 | 00-0800-0501 | M8 WASHER ZINC PLATED | 4 |
| 2 | 00-0800-0721 | M8 NYLOC NUT | 4 |
| 3 | 00-0825-0091 | M8 X 25 CAP HEAD SCREW Z/P | 4 |
| 4 | 02-3515-0000 | KB60 X 40 SELF TAPPER | 8 |
| 5 | 02-3517-0000 | KB50 X 25 SELF TAP SCREW | 4 |
| 6 | 03-5866-0500 | DATA LABEL | 1 |
| 7 | 03-6102-0000 | ORBIS BRUSH GUARD 17" | 1 |
| 8 | 03-8309-0035 | ORBIS ECO MOTOR COVER | 1 |
| 9 | 03-8401-0000 | ORBIS ECO 200 LABEL | 1 |
| 11 | 05-4714-0000 | ECO LOK DRIVE BOARD - 17" | 1 |
| 12 | 05-4724-0000 | ORBIS ECO 200 BASE ASSEMBLY | 1 |
| 10 | 05-4712-0000 | ORBIS ECO HANDLE ASSEMBLY | 1 |
Diagram Description (Page 2): The diagram shows an exploded view of the main assembly, illustrating the arrangement of components such as the motor cover, base, handle, and brush guard.
Base Assembly Parts
The following table lists components for the base assembly:
| Ref. No. | Part No. | Part Description | Qty |
|---|---|---|---|
| 1 | 00-0400-0501 | M4 WASHER FORM A Z/P | 2 |
| 2 | 00-0400-0701 | M4 FULL NUT Z/P | 2 |
| 3 | 00-0416-0011 | M4 x 16 POZI PAN HD SCREW Z/P | 1 |
| 4 | 00-0500-0501 | M5 WASHER FORM A Z/P | 2 |
| 5 | 00-0500-0531 | M5 EXTERNAL SHAKEPROOF WASHER | 1 |
| 6 | 00-0500-0701 | M5 FULL NUT Z/P | 2 |
| 7 | 00-0516-0011 | M5 x 16mm POZI PAN HD SCREW ZP | 1 |
| 8 | 00-0800-0511 | M8 SINGLE COIL SPRING | 4 |
| 9 | 00-0800-0751 | M8 1/2 NYLOC NUT Z/P | 1 |
| 10 | 00-0816-0111 | M8 X 16 HEX SET SCREW Z/P | 4 |
| 11 | 00-1200-0503 | M12 WASHER FORM B ST/STL | 2 |
| 12 | 02-0254-0000 | STARLOCK WASHER | 2 |
| 13 | 02-0264-0000 | 8mm TUBE x 40mm | 1 |
| 14 | 02-0264-1000 | WATER FEED PIPE | 1 |
| 15 | 02-3124-0000 | WHEEL CENTRE CAP | 2 |
| 16 | 02-3499-0000 | ORBIS ECO DRIVE BELT | 1 |
| 17 | 02-3515-0000 | KB60 X 40 SELF TAPPER | 10 |
| 18 | 02-3636-0000 | BULKHEAD FITTING | 1 |
| 19 | 02-3636-0000 | BULKHEAD BACKNUT | 1 |
| 20 | 02-3649-0000 | WHEEL - 175mm | 2 |
| 21 | 03-6081-0000 | ORBIS AXLE | 1 |
| 22 | 03-8646-0000 | ORBIS ECO BASE MOULD | 1 |
| 23 | 03-8359-0000 | CAPACITOR MOUNTING PLATE | 1 |
| 24 | 04-0279-0000 | CABLE TIE - BLACK LK3X | 2 |
| 25 | 04-3212-0000 | CABLE GLAND | 1 |
| 26 | 04-3501-0500 | RUN CAPACITOR 30uF | 1 |
| 27 | 04-3231-0000 | START CAP 100uF (LEROY TYPE MG) | 1 |
| 28 | 04-3969-0000 | H&S MOTOR 400 | 1 |
| 29 | 04-3974-0000 | RELAY HLR3800-4H3D | 1 |
| 30 | 04-4017-0000 | CIRCUIT BREAKER - 8 AMP | 1 |
| 31 | 04-4018-0000 | CIRCUIT BREAKER COVER | 1 |
| 32 | 05-4711-0000 | ORBIS ECO MOTOR PLATE ASSEMBLY | 1 |
Diagram Description (Page 4): This diagram provides an exploded view of the base assembly, detailing parts like wheels, drive belt, motor plate, and various fasteners.
Motor Plate Assembly Parts
The following table lists components for the motor plate assembly:
| Ref. No. | Part No. | Part Description | Qty |
|---|---|---|---|
| 1 | 00-0800-0501 | M8 WASHER ZINC PLATED | 2 |
| 3 | 00-0816-0111 | M8 X 16 HEX BOLT HTG 8.8 Z/P | 2 |
| 5 | 00-2000-0501 | M20 PLAIN WASHER FORM B Z/P | 1 |
| 6 | 00-2000-0521 | M20 INTERNAL SHAKEPROOF WASHER | 1 |
| 7 | 00-2000-0701 | M20 FULL NUT Z/P | 1 |
| 9 | 02-4554-0000 | CIRCLIP EXTERNAL 25mm ST/ST | 1 |
| 10 | 03-8350-0000 | ORBIS PULLEY - 200/400 | 1 |
| 11 | 03-8354-0000 | ORBIS ECO DRIVE PLATE | 1 |
| 13 | 03-8356-0000 | ORBIS ECO SPINDLE | 1 |
| 16 | 05-4784-0000 | BELT TENSION CAM ASSEMBLY | 1 |
Diagram Description (Page 6): This diagram illustrates the motor plate assembly, showing parts such as the pulley, drive plate, spindle, and associated hardware.
Handle Assembly Parts
The following table lists components for the handle assembly:
| Ref. No. | Part No. | Part Description | Qty |
|---|---|---|---|
| 1 | 00-0400-0531 | M4 EXTERNAL SHAKEPROOF WASHER | 2 |
| 2 | 00-0400-0701 | M4 FULL NUT Z/P | 2 |
| 3 | 00-0416-0031 | SCREW M4 X 16 CSK POZI HD BZP | 1 |
| 4 | 00-0800-0501 | M8 WASHER ZINC PLATED | 1 |
| 5 | 00-0800-0511 | M8 SINGLE COIL SPRING | 1 |
| 6 | 00-0800-0721 | M8 NYLOC NUT | 3 |
| 7 | 00-0825-0091 | M8 X 25 CAP HEAD SCREW Z/P | 2 |
| 8 | 00-0855-0091 | M8 x 55 SOCKET HEAD SCREW Z/P | 1 |
| 9 | 00-0860-0121 | M8 X 60 HEX HEAD BOLT Z/P | 1 |
| 10 | 00-0875-0121 | M8 X 75 HEX HEAD BOLT Z/P | 1 |
| 11 | 02-3186-0000 | 10 mm BALL BEARING | 1 |
| 12 | 02-3329-0000 | FIBRE WASHER | 1 |
| 13 | 02-3517-0000 | KB50 X 25 SELF TAP SCREW | 6 |
| 14 | 02-3518-0000 | KB40 X 14 SELF TAP SCREW | 2 |
| 15 | 02-3520-0000 | DIAPHRAGM GROMMET | 1 |
| 16 | 02-3836-0000 | KB50 X 18 SELF TAP SCREW | 4 |
| 17 | 02-4628-0000 | M8 KNOB 32mm DIA | 3 |
| 18 | 02-4629-0000 | 38mm TUBE END CAP | 1 |
| 19 | 03-6182-0000 | RUBBER WASHER | 1 |
| 20 | 03-8360-0000 | ORBIS ROUND HANDLE TUBE | 1 |
| 21 | 03-8361-0000 | ORBIS ECO HANDLE BACK | 1 |
| 22 | 03-8362-0000 | ORBIS ECO HANDLE FRONT | 1 |
| 23 | 03-8363-0000 | ORBIS ECO TRIGGER | 2 |
| 24 | 03-8366-0000 | ORBIS ECO CABLE COVER | 1 |
| 25 | 03-8367-0000 | HANDLE UPSTAND | 1 |
| 26 | 03-8368-0000 | ORBIS ECO HANDLE PIVOT | 1 |
| 27 | 03-8369-0000 | ORBIS ECO LOCKING SPACER | 1 |
| 28 | 03-8370-0000 | ORBIS ECO LUGGED CLAMP | 1 |
| 29 | 03-8371-0000 | ORBIS ECO HANDLE LOCK | 1 |
| 30 | 00-0800-0551 | ORBIS ECO M8 WASHER | 1 |
| 31 | 03-8373-0000 | ORBIS ECO LOCKING BAR | 1 |
| 32 | 03-8374-0000 | ORBIS ECO HANDLE SPRING | 2 |
| 33 | 03-8377-0000 | ORBIS ECO LOCK SPRING | 1 |
| 34 | 03-8395-0000 | ORBIS ECO CABLE WRAP | 1 |
| 35 | 03-8501-0000 | ORBIS ECO SWITCH HOUSING | 1 |
| 36 | 03-8502-0000 | ORBIS ECO INTERLOCK | 1 |
| 37 | 03-8503-0000 | ORBIS ECO SWITCH CAP | 1 |
| 38 | 03-8504-0000 | ORBIS ECO SWITCH CAP SPRING | 1 |
| 39 | 04-0237-0000 | CABLE CLAMP | 1 |
| 40 | 04-3242-0000 | INLET SOCKET IEC 16AMP | 1 |
| 41 | 04-4016-0000 | ECO SWITCH - JIABEN | 1 |
Diagram Description (Page 8): This diagram shows an exploded view of the handle assembly, including the trigger, locking mechanisms, cable cover, and various fasteners.
Wiring Diagram
The wiring diagram for the ORBIS ECO 400 details the electrical connections:
- Motor: 230V 50Hz
- Components: Run Capacitor (30uF), Start Capacitor (100uF), Relay (HLR3800-4H3D), Circuit Breaker (8 AMP - on ECO models only).
- Connections: Shows wiring from Line (L), Neutral (N), and Earth (E) to the components and motor, with color coding (Blue, Brown, Red, White, Black, Green/Yellow).
- Part Numbers for Electrical Components:
- Run Capacitor 30uF: 04-3501-0500
- Start Capacitor 100uF: 04-3231-0000
- Relay HLR3800-4H3D: 04-3974-0000
- Circuit Breaker 8 AMP: 04-4017-0000
- Motor 400 Speed: 04-3969-0000
- Motor 200 Speed: 04-3968-0000
Diagram Description (Page 10): The diagram illustrates the electrical schematic, showing the interconnections between the power input, capacitors, relay, circuit breaker, and the motor.
Accessories
The following accessories are available:
| Part No. | Part Description | Qty |
|---|---|---|
| 04-3055-0053 | 15M CORDSET UK PLUG 16A - ORANGE | 1 |
| 04-3055-0153 | 15M CORDSET EURO PLUG 16A - ORANGE | 1 |
| 03-8392-0000 | ORBIS ECO INSTRUCTION MANUAL | 1 |
| 04-3055-0353 | 15M CORDSET ORANGE AUSTRALIAN | 1 |
