Beldray 3 Tier Heated Airer

Product Overview

This document provides instructions for the Beldray 3 Tier Heated Airer, model EH3752. It covers assembly, operation, safety precautions, care, maintenance, and storage.

Specifications

Product Code: EH3752

Input: 220-240 V ~ 50/60 Hz

Output: 300 W

IP Degree: IPX4

Size: 70 x 73 x 147 cm

Safety Instructions

Please read and follow all safety instructions before using the product.

• Always follow basic safety precautions when using electrical products.
• Verify the mains power supply voltage matches the rating plate.
• Children aged 8+ and individuals with reduced capabilities can use the product under supervision and if instructed on safe usage.
• Children should not perform cleaning or maintenance unless supervised and over 8 years old.
• This product is not a toy; supervise children to ensure they do not play with it.
• The product remains live when connected to the electrical source.
• Cease use immediately if the power cord, plug, or any part is malfunctioning or damaged.
• Repairs should only be carried out by a qualified electrician.
• Keep the product and cord away from children, heat sources, and sharp edges.
• Do not run the cord under carpets or where it may cause a trip hazard.
• Do not immerse the product or plug in water or any liquid.
• Do not operate with wet hands.
• Do not use near a bath, shower, or swimming pool.
• Do not leave the product unattended while connected or in use.
• To disconnect, switch off and remove the plug by hand; do not pull the cord.
• Do not leave the product plugged in or operating overnight.
• Use only for its intended purpose (drying textiles washed in water).
• Do not attempt to move the product while it is in use.
• Do not use with programmers, timers, or remote-control systems that switch it on automatically.
• Do not clean with abrasive chemicals, solvents, or scourers.
• Use on a stable, heat-resistant surface.
• Only use manufacturer-recommended accessories.
• Use of an extension cord is not recommended.
• This product is intended for domestic use only.
• Do not use in small rooms occupied by persons incapable of leaving on their own, unless constant supervision is provided.

WARNING: To avoid a hazard for very young children, install the lowest heated rail at least 600 mm above the floor. Maximum load: 5 kg per wing, 10 kg per layer. Do not use to dry down jackets or quilts.

Hot surface: Do not touch the hot section or heating components of the product.

Care and Maintenance

Before cleaning or maintenance, unplug the product and allow it to cool fully.

• Clean with a soft, damp, lint-free cloth.
• Dry thoroughly.
• Do not use harsh or abrasive detergents or scourers.

Instructions for Use

Assembling the Heated Airer

Before plugging in, the airer needs to be assembled.

1. Unfold the feet and slot them onto the base legs. Use the provided foot screws to secure them.
2. Unclip the storage clips and fold the wings out flat to create the layers.
3. The heated airer is now ready to use.

CAUTION: Take care when assembling, as loose clothing or fingers can become trapped and cause injury.

Operating the Heated Airer

Once assembled, the airer is ready for operation.

1. Hang damp garments as required. Remove as much water as possible before hanging to prevent the airer from collapsing under the weight of wet fabric.
2. Once loaded, plug in the airer and turn it on using the on/off switch. The switch will illuminate, indicating it is on.

? NOTE: For faster drying, spin garments in a washing machine before hanging.

During use, the operating temperature will remain between 45-55 °C.

Storage

The heated airer can be stored in tall, narrow places by folding the wings, securing with the storage clips, and folding the feet in.

CAUTION: When folding, keep loose clothing or fingers clear of the folding parts.

Diagrams and Components

The heated airer consists of the following parts:

• 1. Heated airer (main frame)
• 2. Foldable wings
• 3. Folding feet
• 4. Foot screw (quantity 2)
• 5. Storage clips
• 6. Heated bars
• 7. On/off switch

Compliance markings include UKCA and CE. The product packaging is FSC certified, supporting responsible forestry.

Disposal Information

This symbol on the product, batteries, or packaging indicates it must not be disposed of with household waste. Users are responsible for handing it over to an applicable collection point for recycling. This helps conserve natural resources and prevent negative environmental and health consequences. Retailers may offer take-back services. Users must delete any data on electrical/electronic equipment before disposal. Contact local authorities or retailers for more information.

Manufacturer and Contact

Manufactured by: Ultimate Products UK Ltd., Victoria Street, Manchester OL9 ODD, UK.

Ultimate Products Europe Ltd., 19 Baggot Street Lower, Dublin D02 X658, ROI.

Made in China.

For extended guarantee registration, scan the QR code or visit guarantee.uppic.com/beldray within 30 days of purchase.

For further queries, visit www.beldray.com.