Fanttik NEX K2 Nano Electric Precision Drill Kit
User Manual
1. Safety Warnings
- Avoid moisture, dust, and drops.
- Do not store the product in extreme temperature environments.
- Stay alert, watch what you are doing, and use common sense when operating. Do not operate while you are tired or under the influence of drugs, alcohol, or medication.
- This product is not a toy and should not be used by children under 10 years old.
- This product has a built-in battery; do not throw it into fire and ensure it is recycled according to local laws and regulations.
- Do not dismantle the machine yourself. Have your power tool serviced by a qualified repair person or contact Fanttik for advice.
2. Package Contents
The package includes the following items:
- Electric Precision Drill x 1 [Image: Line drawing of the Fanttik NEX K2 Nano Electric Precision Drill]
- Storage Case x 1 [Image: Line drawing of the open storage case for the drill kit]
- Chuck Accessories x 1 [Image: Line drawing of chuck accessories]
- HSS Drill Bits x 20 [Image: Line drawing of multiple HSS drill bits]
- User Manual x 1 [Image: Line drawing of the User Manual cover]
- Type-C charging cable x 1 [Image: Line drawing of a Type-C USB charging cable]
3. Product Overview
Electric Precision Drill
The Electric Precision Drill features:
- Type-C charging port [Image: Drill's Type-C charging port]
- Charging Indicator [Image: Drill's charging indicator light]
- On/Off Knob [Image: Drill's On/Off knob]
- Direction Indicator (Light Bar) [Image: Drill's direction indicator light bar]
- Forward/Reverse Button [Image: Drill's forward/reverse button]
- High/Low Speed Switch Knob [Image: Drill's speed switch knob]
- LED Lighting [Image: Drill's LED light at the tip]
- Quick-Install Drill Chuck [Image: Drill's quick-install chuck]
[Diagram: Line drawing of the Electric Precision Drill with numbered callouts pointing to each component.]
Storage Case
The Storage Case includes:
- Open/Close Button [Image: Case's open/close button]
- Charging Port [Image: Case's charging port]
- Storage Compartment [Image: Case's storage compartment]
- Drill bits [Image: Drill bits stored in case]
- Electric Precision Drill [Image: Drill inside case]
[Diagram: Line drawing of the Storage Case with numbered callouts pointing to each part.]
4. Operation and Functions
How to open/close the Storage Case
- Press the Open/Close button to open the Storage Case.
- Close the storage case; the button will automatically lock to completely close the storage case.
Storage of Drill Bits
- Drill bits are stored in the magnetic holders in the storage.
- After use, place the drill bit back into the magnetic holder, and it will be held in place by magnet.
How to Pick up the Electric Precision Drill
- Pick up the strip first, and then the Drill will lift with it; you can then pick up the Drill.
- Remember to keep the strip always under the Drill, or it will be difficult to pick up the Drill.
Forward/Reverse Button
- Press the Forward Button to drill.
- Press the Reverse Button to remove the drill bit and prevent it from getting stuck.
- Double-click the Forward/Reverse button to automatically rotate. Click the button again to stop automatic rotation.
[Diagram: Forward/Reverse button illustration]
On/Off Knob
The On/Off knob controls the power.
[Diagram: On/Off knob illustration]
Direction Indicator (Light Bar)
- Pick up the strip first, and then the Drill will lift with it; you can then pick up the Drill.
- Remember to keep the strip always under the Drill, or it will be difficult to pick up the Drill.
[Diagram: Direction indicator illustration]
High/Low Speed Switch Knob
- Rotate the speed switch knob to switch between high and low speed settings.
- Low speed mode: 250±10% RPM. This mode is suitable for high hardness materials and high torque applications, such as resin, composite clay model drilling, pearl, PCB drilling, etc.
- High speed mode: 1300±10% RPM. This mode is suitable for general hardness materials and low torque applications, such as small woodworking projects, plastic/soft metal model drilling, soft stone, etc.
[Diagram: Speed switch knob illustration with logo]
LED Light
- When the Forward/Reverse button is pressed, the Drill starts rotating/automatically rotating, and the LED light turns on simultaneously.
- The LED light will stay on for 10 seconds without any further operation.
[Diagram: LED light illustration]
Battery Charging
- The drill is equipped with a universal Type-C charging port and includes a USB charging cable. A charger is not included.
- Please use a 5V charger for charging. The drill supports a maximum charging input of 5W (5V/1A).
Charging Indicator Status
- If the battery level is below 20% during use, the indicator will flash red rapidly for 5 seconds before turning off. Please recharge the battery promptly.
- During charging, the indicator will flash green slowly.
- When the battery is fully charged, the indicator will remain solid green.
Drill Bit Installation
- Remove a drill bit from the Storage.
- Loosen the Quick-Install Drill Chuck and insert the drill bit into the chuck.
- Finally, tighten the chuck.
Notice: The drill bit is sharp. Be sure to remove the drill bit and put it back into the storage after using to avoid injury.
5. Specifications
| Product Name | Electric Precision Drill Kit |
|---|---|
| Product Model | NEX K2 Nano |
| Product Dimension | 204 x 76 x 40 mm |
| Net Weight | 378g |
| Electric Precision Drill Dimension | 187×24 mm |
| Low Speed Mode | 0.6Nm Max. / 250±10% RPM |
| High Speed Mode | 0.15Nm Max. / 1300±10% RPM |
| Max. manual torque | 3 N·m |
| Battery Capacity | 800mAh |
| Rated Voltage | 3.7V |
| Charging Input | 5V/1A |
| Input Port | USB Type-C |
| Charging Time | < 180 min |
| Drill bit Shank Size | 3.2mm |
| Drill bit Length | 35mm |
| Drill bit Material | HSS |
| Drill bits diameter (unit:mm) | 0.6*3/0.7*3/0.8*2/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0/3.2 |
6. Warranty Card
Your Warranty Includes
- Your product is covered for 12 months against manufacturing defects.
How to Return Your Fanttik Product
- Email Fanttik at support@fanttik.com with your order number.
- Fanttik will email you a prepaid return shipping label.
- Tear off the 'Return Details' page, fill it out, and include it inside your return package.
- Use the provided label to ship your package back to Fanttik.
- Once shipped, please email Fanttik. They will expedite your replacement or solution.
Email: support@fanttik.com ✉️
Return Details
Complete this section and include it in your package for faster processing:
| Purchase Name: | |
|---|---|
| Order Number: | |
| Date of Purchase: | |
| Place of Purchase: |
Contact Information
Phone: 929-693-6066 (MON-FRI 9AM-5PM ET)
Website: www.fanttik.com
Email: support@fanttik.com
Manufacturer: METASEE LLC
Address: 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203
Made in China
Certifications: RoHS, CE, [Quality Mark যাচাই], FC, IC, [BC Certification], [Recycling Symbol ♻️], [WEEE Symbol ?️]
