Fanttik NEX E2 Ultra Precision Electric Screwdriver Kit

Contents

• 1. Safety Warnings
• 2. Package Contents
• 3. Product Overview
• 4. Operation and Functions
• 5. Specifications
• Warranty Info

1. Safety Warnings

• Avoid moisture, dust, and drops.
• Do not store the product in extreme temperature environments.
• Stay alert, watch what you are doing, and use common sense when operating. Do not operate while you are tired or under the influence of drugs, alcohol, or medication.
• This product is not a toy and should not be used by children under 10 years old.
• This product has a built-in battery; do not throw it into fire and should be recycled by local laws and regulations.
• Do not dismantle the machine yourself. Have your power tool serviced by a qualified repair person or contact Fanttik for advice.

2. Package Contents

• Metal Housing x 1
• Rotatable bit storage x 1
• Electric Precision Screwdriver x 1
• Screwdriver bits x 50
• Tweezers x 1
• Metal Spudger x 1
• User Manual x 1
• USB charging cable x 1

3. Product Overview

1. Press area (press to eject the bit storage and screwdriver)

2. Metal Housing

3. Rotatable bit storage

4. USB Type-C Charging Port

5. Power Indicator ring light

6. Torque setting knob

7. Torque energy bar

8. Forward/Reverse rotation button

9. Bit chuck

4. Operation and Functions

Open and close the bit storage

• To open: Press down on the top surface of the bit storage (avoid the central screwdriver). Both the bit storage and screwdriver will then pop up from the metal housing.
• To close: First, place the bit storage back into the metal housing and press it down to lock in place. Then, position the screwdriver back into the center of the bit storage and press it down to secure it.

Storage of bits

• Bits are stored in the magnetic bit storage holders. Tweezers and a spudger are included. After using the bits, position them back into the magnetic holders, and they will be attracted by magnet.

Storage of the screwdriver

• The screwdriver is stored in the center of the bit storage and secured by magnetic attraction.

Bit installation

• Retrieve a bit from the bit storage, then insert it into the screwdriver bit chuck.

Screwdriver Forward/Reverse button

• Press the [down arrow] or [up arrow] button to tighten or loosen screws.

Torque setting knob

• Rotate the torque knob from OFF to five different levels to gradually increase the torque.

LED Torque energy bar

• The length of the energy bar indicates different torque settings. A longer energy bar corresponds to a higher torque.
• While the screwdriver is operating, the energy bar will display a flowing effect. The direction of the flow indicates the direction of the screwdriver's operation.

Bit magnetizer

• Place the bit tip in the magnetizing window for a few seconds to complete magnetization.

Turn on/off the LED light

• Press the forward/reverse rotation button to turn on the LED light simultaneously.
• The LED light will stay on for 10 seconds if no further operation is performed.

Power Indicator

• When the battery level drops below 20% during use, the indicator will blink red rapidly.
• While charging, the indicator will blink green slowly.
• When the battery is fully charged, the indicator will display solid green.

Battery charging

• This screwdriver features a universal Type-C charging port and includes a USB charging cable. A charger is not included; please use a 5V output charger for charging.

5. Specifications

Bit specifications

Bit Shank: 5/32-inch (4mm) hex shank

Bit Material: Coated S2 Steel

Bit Length: 1.1 inches and 1.8 inches (28mm and 45mm)

Bit Type:

• Phillips: PH0000, PH000, PH00, PH0, PH1, PH2
• Slotted: SL1.0, SL1.5, SL2.0, SL2.5, SL3.0, SL3.5
• Hex: H0.7, H0.8, H0.9, H1.0, H1.3, H1.5, H2.0, H2.5, H3.0
• Torx: T2, T3, T4
• Torx Security: TR5, TR6, TR7, TR8, TR9, TR10, TR15
• Phillips Security: P2, P5, P6
• Tri-wing: Y0.6, Y1.0, Y2.0, Y2.5, Y3.0, Y1
• U-type: U2.0, U2.6, U3.0
• Spanner: S0, S1
• Phillips: W1.5
• Spanner: 0.8

Note: PH0, PH1, SL2.0, TR8, TR10, H2.0 are 1.8 inches (45mm) in length; the remaining are 1.1 inches (28mm).

Warranty Card

Warranty Policy

Your product is covered for 12 months against manufacturing defects.

How to Return Your Fanttik Product

• Email Fanttik at support@fanttik.com with your order number.
• Fanttik will email you a prepaid return shipping label.
• Tear off the 'Return Details' page, fill it out, and include it inside your return package.
• Use the provided label to ship your package back to Fanttik.
• Once shipped, please email Fanttik. They will expedite your replacement or solution.

Return Details

Complete this section and include it in your package for faster processing.