Fanttik NEX L2 Pro Cordless Screwdriver Kit
Please read this instruction manual carefully before use and retain it for future reference.
1. Safety Warnings
- Avoid moisture, dust, and drops.
- Do not store the product in extreme temperature environments.
- Stay alert, watch what you are doing, and use common sense when operating. Do not operate while tired or under the influence of drugs, alcohol, or medication.
- This product is not a toy and should not be used by children under 12 years old.
- This product has a built-in battery; do not throw it into fire and ensure it is recycled according to local laws and regulations.
- Do not dismantle the machine yourself. Have your power tool serviced by a qualified repair person or contact Fanttik for advice.
2. Package Contents
- NEX L2 Pro screwdriver x 1
- Integrated storage stand x 1 (Description: A white, dome-shaped stand with the Fanttik logo.)
- Storage bag x 1 (Description: A simple drawstring bag.)
- 1-inch bit x 14 (Description: Fourteen small screwdriver bits.)
- 2-inch bit x 6 (Description: Six longer screwdriver bits.)
- Extension bit holder x 1 (Description: A slender tool with a hexagonal end and a chuck mechanism.)
- USB-C charging cable x 1 (Description: A USB-A to USB-C cable.)
- User manual x 1
3. Product Overview
Screwdriver Components:
- Bit Chuck
- LED Work Light
- Torque Setting Knob
- Power Indicator (circular)
- Display Screen
- Forward/Reverse Button
- Variable Speed Trigger
- USB Type-C Charging Port
Accessories:
- Screwdriver Stand
- Bit Storage Compartment (integrated into the stand)
4. Operation and Functions
Open the Bit Storage Compartment
The Screwdriver Stand is attached to the top of the Bit Storage Compartment by magnets, serving as a lid. Remove the Screwdriver Stand to reveal all the bits.
Install Screwdriver Bits
Take a bit from the Bit Storage Compartment and insert it into the screwdriver chuck. The tool supports third-party 1/4-inch bits.
Torque Settings
Rotate the Torque Setting Knob to select one of seven torque levels: 0.5, 1.0, 2.0, 3.0, 4.0, 5.0, or 6.0 N·m. The selected torque value is displayed on the screen.
Choose Forward/Reverse Direction
Press the Forward/Reverse Button to toggle between forward or reverse directions. A corresponding direction arrow will appear on the screen.
Tighten or Loosen Screws
After selecting the forward or reverse direction, press the Variable Speed Trigger to tighten or loosen screws.
Display Screen
The Display Screen shows information such as torque setting, rotation direction, and battery level. It displays numerical values for torque and battery status indicators.
Turn on/off the LED Work Light
The LED work light automatically turns on when the Variable Speed Trigger is pressed. The LED work light remains on for 10 seconds after the trigger is released.
Power Indicator
The circular Power Indicator glows green when battery power is sufficient and flashes red when the battery level is critically low.
Battery Charging
This screwdriver is equipped with a universal Type-C charging port and includes a USB charging cable. A charger is not included; please use a 5V charger for charging. The screwdriver supports a maximum charging input of 10W (5V/2A).
5. Specifications
| Product Name | Cordless screwdriver |
|---|---|
| Product Model | NEX L2 Pro |
| Product Dimension | 8.27x8.27x2.0 inches (210x210x51mm) |
| Screwdriver Dimension | 5.83x4.96x1.5 inches (148x127x38mm) |
| Net Weight (with storage case) | 1.31 lb (592 g) |
| Torque Control | 0.5/1.0/2.0/3.0/4.0/5.0/6.0 N·m |
| Max. hard torque | 6.0 N·m |
| Max. manual torque | 8.0 N·m |
| Rotation Speed (unloaded) | 250 RPM |
| Battery Capacity | 2000 mAh / 7.4 Wh |
| Rated Voltage | 3.7 V |
| Charging Input | 5 V / 2 A |
| Charging Time | 60-90 minutes |
Bit Specifications
Bit Shank: 1/4-inch (6.3mm) hex shank
Bit Material: Coated S2 Steel
Included Bit Types:
- Phillips: PH0, PH1, PH2, PH3
- Slotted: SL3, SL4, SL5, SL6
- Pozidriv: PZ2
- Square: S1, S2
- Hex: H3, H4, H5, H6
- Tamper-Resistant Torx: TR10, TR15, TR20, TR25, TR30
Note: PH0, PH1, PH2, SL4, H4, and H5 are 2-inch (50mm) bits; all others are 1-inch (25mm) bits.
Warranty Information
Warranty Policy
Your product is covered for 12 months against manufacturing defects.
How to Return Your Fanttik Product
- Email Fanttik at support@fanttik.com with your order number.
- Fanttik will email you a prepaid return shipping label.
- Tear off the 'Return Details' section from the warranty card, fill it out, and include it inside your return package.
- Use the provided label to ship your package back to Fanttik.
- Once shipped, please email Fanttik again. They will expedite your replacement or solution.
Return Details
Complete this section and include it in your package for faster processing:
| Purchase Name: | |
|---|---|
| Order Number: | |
| Date of Purchase: | |
| Place of Purchase: |
