SKÅDIS Storage Basket Assembly Instructions
Product Information
This guide details the assembly of the IKEA SKÅDIS storage basket. It is designed to be mounted onto the SKÅDIS pegboard system.
Product Code: AA-2522032-3
Brand: IKEA
Parts List
- 2x Locking Knobs (Part No. 10123594)
- 4x Fasteners (Part No. 10125067)
- 4x Wall Plugs/Anchors (Part No. 10123592)
Tools Required
A screwdriver is needed for installation. [ screwdriver icon ]
Mounting Steps
Step 1: Position and Insert Fasteners
Align the SKÅDIS storage basket with the desired location on the SKÅDIS pegboard. Insert two fasteners (Part No. 10125067) through the rear holes of the basket and push them through the corresponding holes in the pegboard. [ 2x ]
Diagram Description: Visual shows the basket being held against the pegboard, with fasteners being pushed from the basket's interior through the pegboard.
Step 2: Secure with Wall Plugs
On the front side of the pegboard, place one wall plug/anchor (Part No. 10123592) onto the end of each protruding fastener. [ 2x ]
Diagram Description: Close-up view illustrating wall plugs being fitted onto the ends of the fasteners that extend through the pegboard.
Step 3: Lock the Basket
Insert the two locking knobs (Part No. 10123594) into the designated slots on the front of the basket, ensuring they engage with the fasteners. [ 2x ]
Rotate each locking knob clockwise [ ▶️ ] to firmly secure the basket to the pegboard.
Diagram Description: Detailed view of a locking knob being inserted and then turned clockwise to lock the basket in place.
Customer Support
For assistance or questions regarding assembly, please consult IKEA's official resources or contact their customer support. [ support icon ]
