SKÅDIS Storage Basket Assembly Instructions
This document provides step-by-step instructions for assembling the IKEA SKÅDIS storage basket.
Step 1: Initial Attachment
This step shows how to attach the basket to a surface. A screwdriver [?] is indicated as the required tool. Two screws (part number 10125067) are used. The diagram illustrates inserting these screws through the basket's mounting holes into the surface. Two bushings (part number 10123592) are also shown, likely to be used with the screws for secure fastening. The action of tightening is depicted with a circular arrow [?].
Step 2: Securing to Pegboard
This step details the process of securing the basket to a pegboard system. Two screws (part number 10125067) are inserted from the inside of the basket. On the exterior side, two bushings (part number 10123592) are placed onto the screw ends and tightened. A magnified view clearly shows the screw passing through the basket and engaging with the bushing. The quantity '2x' is specified for the components used in this step.
Step 3: Attaching Holder to Pegboard
This step demonstrates how to attach a holder component (part number 10123594) to a pegboard. The holder is inserted into a hole on the pegboard. A rotating arrow [?] indicates that the holder is secured in place by turning it. The quantity '2x' is shown for this specific holder component.
Components Overview
The following components are included in the package:
- 2x Holder (part number 10123594)
- 4x Screw (part number 10125067)
- 4x Bushing (part number 10123592)
Support and Information
The instructions include visuals that may represent user confusion [❓] or the need to contact customer support. A depiction of a person on the phone with an IKEA building [? IKEA] suggests users should reach out to IKEA for assistance if they encounter difficulties during assembly.
