Signature Design by Ashley U2800418 Reclining Sofa: Assembly and Operation Guide
Important Safety Notices
Always use proper tools.
Follow the assembly steps in order. Do not skip any steps.
Check all packing materials carefully for small parts that may have come loose during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
Keep these instructions for future reference.
Be very careful when handling glass or mirrors during assembly, as severe injury may result if they break. Never handle large pieces of glass or mirrors by yourself.
When assembling products with electrical cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support the weight of a person.
If assembly instructions state that two or more people are required, do not attempt by yourself due to the risk of injury.
Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries that may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts Identification
- Part A (x1): Sofa Base (Bottom of the sofa)
- Part B (x2): Backrests
- Part C (x1): Armrest/Side component
- Part D (x1): Hardware Pack (Not included in this diagram)
- Part E (x2): Small components (e.g., feet, not explicitly described)
Assembly Instructions
Step 1: Prepare the Backrests
Open the zipper on the sofa base and take out the backrests.
Step 2: Attach Backrests
Connect the two backrests (Part B) to the sofa base (Part A) using the provided connectors (indicated by B and C in the diagram).
Step 3: Connect Electrical Components
Connect the electrical components, such as power cords and USB cables, to the designated ports on the sofa base.
Step 4: Final Assembly Check
Ensure all parts are securely connected and the sofa is stable.
Features and Operation
USB Port
The sofa features a USB port with an output of 2.1a (max) / 5V. It consumes zero power when not in use (0W without USB).
Control Buttons (Keys)
- Key 1: Power recline open.
- Key 2: One-button reset (home position). Closes power recline and headrest, and stops heating and massage functions.
- Key 3: Headrest open.
- Key 4: Headrest closed.
- Key 5: Press once to activate heating (heating indicator light turns on). Press again to stop heating (heating indicator light turns off).
- Key 6: Press once to start massage. Press again to stop massage.
Heating Feature
When Key 5 is pressed, the heating function will start. If not manually stopped, it will automatically turn off after 30 minutes. To restart, press Key 5 again. The temperature will reach approximately 140-158°F (60-70°C).
Massage Features
The massage function operates through 3 settings for one cycle: Steady, Wave, and Pulse. This is the normal cycle, and individual settings cannot be selected. Each setting lasts approximately 5-8 minutes.
- Steady: A rotation of 2 airbags will fill while the opposite 2 are empty, repeating the filling and emptying process.
- Pulse: The airbags will fill partially, then rapidly fill to provide a pressing sensation on your back. These will continue to fill and empty in cycles until the setting is finished.
- Wave: The airbags will fill more in a cycle and slower to provide pressure during the cycle, representing a wave-like massage. The air will revert in the opposite direction as they empty.
When pressing Button 6, the massage airbags will start. To deactivate, press Button 6 again. If not turned off manually, the massage will complete its cycles and turn off automatically after 20 minutes. To restart, press Button 6 again.
Frequently Asked Questions & Troubleshooting
Item | Probable Reason | Troubleshooting |
---|---|---|
Switch/Power not working | 1. Using wrong power supply. 2. The plug is poorly connected. 3. The cable connecting the motor and power supply is poorly connected. 4. The above actions are invalid. | 1. Use a specific power supply. 2. Check the plug and reconnect it properly if necessary. 3. Check the cables between the back and seat, reconnect them if necessary. 4. Product is damaged; please contact the retail store. |
Massage not working | 1. Massage key (Key 6) is not pressed. 2. Air tubes are poorly connected. 3. The above actions are invalid. | 1. Press Key 6 to activate the massage. 2. Check the air tubes between the back and seat, reconnect them if necessary. Ensure the snap joint is buckled up. 3. Product is damaged; please contact the retail store. |
Heat not working | 1. Heating key (Key 5) is not pressed. 2. The above actions are invalid. | 1. Press Key 5 to turn on the LED indicator. 2. Product is damaged; please contact the retail store. |