Signature Design by Ashley 2200315/2200415 Power Reclining Sofa

Important Safety Notices

Please read the following safety instructions carefully before beginning assembly:

• Always use the proper tools.
• Follow the assembly steps in order; do not skip any steps.
• Check all packing materials carefully for small parts that may have come loose during shipment. If parts are missing, contact the retailer from which you purchased the product. Do not use substitute parts.
• Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
• Keep these instructions for future reference.
• When assembling products that involve glass or mirrors, handle them with extreme care, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
• For products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the cord during assembly.
• Do not stand on tables, including end tables, coffee tables, and dining tables, as they are not designed to support a person's weight.
• When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
• If assembly instructions state that two or more people are required, do not attempt assembly alone, as there is a risk of injury.
• The flexible external cord or cord of this luminaire cannot be replaced; if the cord is damaged, the furniture shall be destroyed.

Disclaimer: Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

Assembly Instructions

Parts Identification

• Part A: Sofa Base (1 unit)
• Part B: Armrests (2 units)
• Part C: Backrests (1 unit)
• Part D: Not Included (e.g., power adapter, not supplied with the unit)

Step 1: Initial Assembly

Attach the armrests (B) and backrests (C) to the sofa base (A). Use six (x6) connectors as indicated in the diagram.

Step 2: Connecting Power and USB

Connect the necessary cables to the sofa. Ensure the power cord is unplugged before starting. A USB port is available for charging devices.

Step 3: Partial Assembly View

The diagram shows the sofa with the main components attached.

Step 4: Completed Assembly

The diagram shows the fully assembled sofa, featuring cup holders in the center console and adjustable headrests.

Operating Your Sofa

Control Panel Functions

LED Light Control

The LED light can be controlled as follows:

1. Touch the light to turn it on.
2. Touch again to increase intensity.
3. Touch a third time to turn it off.