Project Source Solar LED 3-in Tablet Dispenser
Model #CD704S-PS
Thank you for purchasing this Project Source product. These instructions are designed to help you enjoy the product with ease.
For additional information, visit Lowes.com, search the item number 5333332, and refer to the Guides & Documents tab.
For questions or issues, contact customer service at 866-389-8827 (Mon-Sun, 8 a.m. - 8 p.m. EST) or ascs@lowes.com.
Preparation
Before first use, place the dispenser in direct sunlight for 5-7 hours to ensure a full charge. Once fully charged, the dispenser will automatically illuminate when the environment becomes dark.
Step 1: Open Dispenser
Rotate the top section to open the dispenser.
Step 2: Add Chlorine Tablets
Place chlorine tablets (not included) inside the dispenser.
Step 3: Close Dispenser
Rotate the top section to close the dispenser securely.
Step 4: Automatic Operation
The lights will automatically turn on at night.
Important: After adding chlorine tablets, ensure the Chlorine Floater is closed before placing the dispenser in water to prevent tablets from falling out. When chlorine tablets are low, the Chlorine Floater will tilt, indicating it's time to replace them.
Technical Parameters
| Battery | AA Ni-MH 900mAh 1.2-1.4V |
| Solar Charging | 2V max 190mA |
| LED Light | 4 colors slowly gradient |
| Chlorination Barrel Capacity | 3 inches in diameter * 4 pieces (7.62 cm diameter * 4 pieces) |
| Waterproof Rating | IP68 |
| Working Hours | Varies with light intensity; average duration is 5-7 hours |
Dimensions:
- Height: 11.2 inches
- Diameter: 5.9 inches
Certifications: CE, [recycling symbol], Made in China
Access Denied
