NOMA Nobela 3-Head Post Light

Important Information

Please read this manual carefully before assembling this product and save it for future reference.

Parts List

• A: Finial - 3
• B: Nut - 3
• C: Cover - 3
• D: Washer - 3
• E: Electric wire - 1
• F: Knob - 3
• G: Centre pillar - 1
• H: Decorative component - 3
• I: Top of decorative pillar - 1
• J: Middle of decorative pillar - 1
• K: Bottom of decorative pillar - 1
• L: Mounting screw - 6
• M: Screw - 3
• N: Iron hook - 3
• O: Wire connector - 5
• P: A tripod - 1
• Q: Big cap nut - 3
• R: Small nut - 6

Needed for Assembly:

• Flat-head screwdriver
• Cross-head screwdriver
• Step-ladder
• Wire strippers
• Pliers
• Electrical tape
• Wire cutters
• Safety glasses

Assembly Instructions

Step 1 - requires N, P
Install iron hooks (N) into the tripod (P), then embed the component in the ground level with concrete. Note: The threaded nipple must protrude outward 1 5/8" (41 mm).

Step 2 - requires B, D, G, H
Remove centre pillar (G) on top of the screws and decorative cover. Successively install the decorative components (H) into centre pillar (G) and secure them with washers (D) and nuts (B).

Step 3 - requires E, G, O
Pull out the wires from the centre pillar (G). Place the electric wire (E) through the centre pillar (G), and strip 3/4" (19 mm) of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Tape wire connectors (O) and wires together with electrical tape (not included) and carefully tuck wires back into the centre pillar (G). Install the decorative cover into centre pillar (G) and secure with screws.

Step 4 - requires A, B, C, D, F, H, L
Install light bulbs (not included). Use three 60 W bulbs. Install finials (A) on top of the covers (C), and secure with washers (D) and nuts (B). Place covers (C) onto the decorative components (H) and secure with screws (L). Then, secure the knobs (F) into decorative components (H).

Step 5 - requires E, G, I, J
Pass through the electric wire (E) into the top of decorative pillar (I) and middle of decorative pillar (J). Secure the top of decorative pillar (I) into centre pillar (G), then secure the middle of decorative pillar (J) into the bottom of decorative pillar (K).

Step 6 - requires E, K, M
Pass through the electric wire (E) into the bottom of decorative pillar (K) and secure with screws (M).

Step 7 - requires O, P, Q
Strip 3/4" (19 mm) of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Tape wire connectors (O) and wires together with electrical tape (not included). Place the lighting components into the A tripod (P) and secure with big cap nuts (Q).

Warranty

This product carries a one (1) year warranty against defects in workmanship and materials. Noma Canada agrees to replace a defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.

Made in China
Imported by
Golden Viking Sports, LLC.
Sumner, WA, USA 98390