Nedis LOCKBLGB20BU Replacement Battery for Bluetooth Padlock

Quick Start Guide

This guide provides essential information for the Nedis LOCKBLGB20BU replacement battery, intended for use with Nedis Bluetooth padlocks.

For detailed information, please refer to the extended manual available at: ned.is/lockblgb20bu

Intended Use

The battery is designed exclusively for Nedis padlocks, specifically the LOCKBTP10xx series. Any modifications or misuse may affect product safety, warranty, and functionality. Nedis is not liable for damages resulting from non-compliance with safety instructions or improper use.

Parts List (Image A)

• 1. Padlock (not included)
• 2. Connector of the padlock (not included)
• 3. Connector of the battery
• 4. Battery
• 5. Lid (not included)
• 6. Screw (not included)
• 7. Screw cover (not included)

Safety Instructions

WARNING: Handle batteries with care. Avoid short-circuiting, exposure to extreme temperatures, and mechanical shock. Keep batteries clean and dry. If a battery leaks, avoid contact with skin and eyes, and seek medical advice if swallowed. Always use the recommended battery type and ensure proper disposal of used batteries.

Installing the Battery (Images B-E)

1. Remove the screw cover.
2. Unscrew the lid.
3. Remove the lid.
4. Pull out the old battery.
5. Disconnect the battery and padlock connectors.
6. Connect the new battery to the padlock.
7. Insert the new battery, ensuring wiring is not pinched.
8. Replace the lid.
9. Secure the lid with the screw.
10. Reattach the screw cover.
11. Test the padlock's functionality.
12. Dispose of the old battery properly.

Specifications