Nedis WIFICO20CWT Outdoor IP Camera Quick Start Guide

Product Description

The Nedis WIFICO20CWT Outdoor IP Camera features:

• 1. Status indicator
• 2. Reset button
• 3. Speaker
• 4. Microphone

Getting Started

Follow these steps to set up your camera:

1. Download and install the 'Nedis SmartLife' app from the Apple App Store or Google Play Store on your mobile device.
2. Launch the 'Nedis SmartLife' app.
3. Create a new account or log in to your existing account.
4. Tap '+' to add the device.
5. Select 'Security Camera' from the list of products.
6. Connect the power adapter to the device and plug it into a wall socket.
7. If the status indicator does not flash, press the reset button. If it flashes, confirm in the app.
8. Confirm your Wi-Fi network and password.
9. Enter a name for the device. This name will also be used for push notifications.
10. Use the included metal bracket to mount the camera on a wall or at an angle.
11. Place the camera on the bracket and rotate to secure it.

Safety Precautions

• To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a problem occurs.
• Read the manual carefully before use and keep it for future reference.
• Use the device only for its intended purposes as described in the manual.
• Do not use the device if any part is damaged or defective. Replace it immediately if damaged or defective.

Cleaning and Maintenance

• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If it does not operate correctly, replace it with a new one.
• Clean the outside of the device with a soft, damp cloth.

Support

For further assistance, comments, or suggestions, please visit www.nedis.com/support.