Rowenta Clean & Steam Multi RY8544WH User Guide

Introduction

This guide provides comprehensive instructions for the Rowenta Clean & Steam Multi RY8544WH. It covers setup, operation, maintenance, and safety precautions to ensure optimal performance and longevity of your appliance.

Product Overview

The Rowenta Clean & Steam Multi is a versatile steam cleaner designed for efficient cleaning of various floor types. It combines steam cleaning with vacuuming to provide a thorough and hygienic cleaning experience.

Getting Started

1. Assembly

Follow the diagrams to assemble the appliance:

1. Attach the head to the appliance body.
2. Fill the water tank with tap water. Ensure not to add any chemicals, detergents, or perfumes.
3. Connect the power cord.

2. Operation

1. Powering On: Plug in the appliance and press the power button. The appliance will be ready for use after approximately 30 seconds of heating.
2. Steam Modes: Choose between ECO mode (for wooden floors) or MAX mode (for stone or tiled floors).
3. Cleaning: Press the vacuum button on the side and hold the steam trigger to vacuum and wash simultaneously.

Maintenance

1. Emptying the Dust Container

1. Press the 2 latches to detach the dust container from the appliance.
2. Empty the container and reattach the components: separator, filter, and lid.
3. Install the dust container back onto the appliance.

2. Cleaning the Dust Container and Water Tank

Clean the dust container and water tank every week. Wash all parts with clear water and let them dry completely.

3. Cleaning the Foam Filter

Wash the foam filter abundantly with clear water. Wring it well to remove excess water and let it dry for 12 hours.

4. Replacing the Foam Filter

Replace the foam filter of the dust container every 6 months. Detach the lid, remove the old filter, and install a new one.

5. Replacing the Anticalc Filter

Replace the anticalc filter (located behind the water tank) every 3 months to maintain the appliance's durability.

6. Cleaning Accessories

Regularly wash accessories with clean water. Allow accessories to cool down before detaching them to avoid burns.

7. Mop Care

Mops can be washed with tap water or in a washing machine at 40°C. Allow the mop and its support to cool down after cleaning to avoid hand burns. Replace the mop after 100 washes.

Storage and Transport

1. Storage

Store the appliance inside or outside a closet. Always store it on the plastic support (included in the pack) to protect your floors from heat and humidity.

2. Transport

To transport the appliance, use the transport wheels or the transport handle located at the back of the appliance. Empty the water tank and use the storage bag for accessories. Allow the appliance approximately 30 minutes to cool down before storing or transporting.

Safety Instructions

Please read the safety and use instructions booklet carefully before first use. Pay attention to warnings and precautions to ensure safe operation.