Rowenta CLEAN IT

Introducing your CLEAN IT

Appliance

Diagram showing the Rowenta CLEAN IT appliance with numbered parts: 1. Carrying handle, 2. On/off button, 3. Clean water tank, 4. Dirty water tank, 5. Multi-use suction hose storage, 6. Power cord storage. Also shown are accessories labeled A through H: A. Narrow brush, B. Wide brush, C. Crevice tool, D. Shoe brush, E. Auto-clean attachment, F. Accessory storage bag, G. Carpet & fabric cleaner for pets 250 ml, H. Carpet & fabric cleaner 250 ml.

Accessories

This appliance has four compatible cleaning accessories designed for various uses.

• For ground-in dirt: Narrow brush
• For large stains: Wide brush
• For hard-to-reach areas: Crevice tool *
• For shoes: Shoe brush *

Cleaners: Cleaning solutions designed to effectively clean stains. Use only CLEAN IT cleaners to keep your appliance working over time.

* Depending on models. The markings should be followed to ensure correct measurement. Available for purchase in 1-l version on www.rowenta.com

Installing your CLEAN IT

Carrying and positioning the appliance

Hold the appliance by the carry handle. Always position your device on solid, level ground for use. Do not place the product on a carpet with piles longer than 10 mm.

Filling the water tank

Diagram illustrating the five steps for filling the clean water tank: 1. Remove the clean water tank. 2. Open the water tank cap. 3. Fill the tank with cold water up to the MAX mark according to the surface area to be cleaned (small/large surface area). 4. Pour in the cleaner up to the indicated mark. Use only CLEAN IT cleaners. 5. Close the cap and reposition the water tank on the appliance.

Connecting the appliance and unwinding the hose

Diagram showing three steps: 1. Before use, unwind the power cord fully and plug in the plug. 2. Completely unwind the suction hose. 3. Attach the desired accessory to the hose cuff. You will hear a click when it is in place.

Using your CLEAN IT

Tip: Perform a preliminary test on a non-visible part of the fabric you wish to clean. You can find all the tips on page 21.

Diagram illustrating the usage steps: 1. A warning icon indicating to turn off the unit before refilling the tank. 2. The appliance being turned on. Do not start the appliance without the water tanks properly fitted. Do not remove the tanks while the appliance is in use. 3. Spray the water/cleaner mixture onto the stain by pressing the trigger. Brush and vacuum the surface to be cleaned from top to bottom. Repeat as many times as is needed to clean the stain.

Maintaining your CLEAN IT

Emptying the dirty water tank after each use

Diagram showing three steps for emptying the dirty water tank: 1. Remove the dirty water tank. 2. Remove the lid and empty the water then rinse the water tank and lid. 3. Close the lid and reposition the tank on the appliance.

Cleaning the different parts of your product

Diagram showing three steps for cleaning accessories: 1. Remove the accessory from the handle of the suction hose. 2. For the narrow and wide brushes: rinse the accessory by removing the cover. 3. For a light clean, pour a few drops of washing-up liquid into the tank and wash it by hand. Leave to air-dry before reassembling the components. Use a soft, clean cloth to dry the accessory, or let it air-dry before reassembling the components. Do not wash the water tanks or the product in the dishwasher.

Using the auto-clean attachment

Rinses the suction hose after use to prevent unpleasant odours and maintain your appliance.

Diagram showing three steps for auto-clean: 1. Attach the auto-clean attachment to the multi-purpose suction hose cuff. 2. Remove the clean water tank cap and put the auto-clean attachment into the bottom of the tank. 3. Press the start button and let the appliance run for 30 seconds to clean the suction pipe.

Storing your CLEAN IT

Diagram illustrating four steps for storing the CLEAN IT: 1. Ensure the dirty water tank is empty and the clean water tank is filled up to the "Small Area" mark. 2. Wrap the multi-purpose suction hose around the appliance. 3. Clip the hose cuff into its holder. 4. Wind the power cord around its holder. Store accessories in the storage bag*.

Our tips for effectively cleaning stains

• The newer the stain, the more effective the cleaning will be.
• Do not put warm water into the clean water tank: The stain could set into the fabric.
• After spraying the water/cleaning solution onto the stain, leave to act for a few minutes before vacuuming.
• To prevent rings or colour changes when drying, it is recommended to treat the entire area around the stain rather than just the stain itself.
• Before cleaning, remove excess dirt with a cloth.

Do not use chemicals or abrasive products to maintain your appliance. Place the device in a dry place.

Three circular images demonstrating the product's effectiveness: one showing the appliance cleaning a carpet, another showing a crevice tool cleaning upholstery, and a third showing a brush accessory cleaning upholstery. Text indicates "The perfect solution to effectively clean everyday stains" and "Scan to view a video about CLEAN IT".