Ice-Watch Instructions
Puesta en marcha
A diagram shows a hand pulling a retention device from the side of a watch case, with an arrow indicating the direction of pull.
Another diagram shows a hand pressing the watch crown inwards, with text indicating 'Next, press the crown'.
Instrucciones
To ensure the correct functioning of your Ice-Watch, periodic maintenance is necessary. The frequency of this maintenance depends on the model, climatic conditions, and user care. As a general rule, we recommend following the instructions below to keep your watch in the best possible condition for as long as possible.
- Temperature: Avoid temperatures below 0°C (30°F) or above 35°C (100°F).
- Exposure: Avoid prolonged exposure to sun and steam, as well as contact with alcohol, detergents, perfumes, or cosmetic products to prevent damage, discoloration, or any other detrimental reaction.
- Water Resistance: Do not use the watch buttons underwater to prevent water from penetrating the mechanism. The watch is water-resistant to 10 ATM.
The information contained in this document is the property of ICE Universal Ltd and may not be reproduced without authorization.
Watch Adjustments
A diagram illustrates the watch components: the minute hand, hour hand, and second hand. It also labels the crown positions (normal, 1st, and 2nd) and the date window, noting that the date window's location may vary by model.
A) AJUSTE DE LA FECHA
- Gently pull the crown to the 1st position.
- Turn the crown to adjust the date. To ensure the date changes to the next day, try to set it before 9 PM (21:00). If set between 9 PM (21:00) and 1 AM (01:00), it may not change the following day.
- Push the crown back to its normal position.
B) AJUSTE DE LA HORA
- Gently pull the crown to the 2nd position.
- Turn the crown to adjust the hour and minutes until the hands are set to the desired time.
- The second hand starts from zero when the crown is returned to its normal position.
