WYBOT C1 Robotic Pool Cleaner User Manual
Brand: WYBOT
Model: WYBOT C1
Manufacturer: WYBOTICS Co., Ltd.
Website: www.wybotpool.com
Introduction
Thank you for choosing WYBOT products. This manual provides information for the WYBOT C1 Robotic Pool Cleaner, designed for high efficiency, low power consumption, easy operation, and thorough pool cleaning.
Its features include one-button activation, powerful suction, fine filtration, smart navigation, and compatibility with various pool shapes and materials.
Safety and Precautions
Warnings ❗
- Use only recommended accessories.
- Ensure the charging port is dry before charging to prevent electric shock.
- Do not charge while the cleaner is running.
- Use only the original authorized power charger.
- Ensure electrical outlets are protected by GFCI/ELI.
- Do not use a damaged charger or extension cords.
- Keep children away from the cleaner; it is not a toy.
- Do not allow children to operate or maintain the device.
- Do not enter the pool while the cleaner is operating.
- Avoid charging or operating in flammable environments.
- Only licensed professionals should disassemble sealed parts.
- Do not operate the cleaner while the pool filter is running.
Cautions ⚠️
- Charge the unit before first use.
- Avoid overcharging to preserve battery life.
- Charge the cleaner every 6 months for long-term storage.
- Clean the filter basket after each use.
- Store the cleaner in a cool, ventilated place away from direct sunlight or heat.
Water Conditions ?
| Parameter | Specification |
|---|---|
| Chlorine | Max 4 PPM |
| pH | 7.0-7.8 PPM |
| Temperature | 41-95°F (5-35°C) |
| NaCl | Maximum = 5000 PPM |
Getting Started
Charging Your WYBOT C1 ??
The device has a rechargeable lithium-ion battery. Charge it before first use and when the battery is low. Connect to a power outlet using the included cable and adapter.
LED Indicator Status:
| LED Light | Indication | Status |
|---|---|---|
| Solid Blue | Solid | Power On |
| Flashing Blue | Flashing | Under working |
| Solid Purple | Solid | Connecting to App |
| Flashing Purple | Flashing | Low battery or under self-parking in the pool |
| Flashing Green | Flashing | Charging in progress |
| Solid Green | Solid | Fully charged |
| Solid or Flashing Red | Solid or flashing | Fault |
Note: Ensure the device is powered off and the charging port is dry before charging. Keep the device and adapter away from direct sunshine or water when charging.
Note: Ensure the device is at least 3m (approx. 10ft) away from the pool edge during charging. Optimal charging environment: 32°F-95°F (0°C-35°C), 5%-95% RH.
The adapter has a blue indicator light for power supply status.
Note: If the yellow light flashes, remove the device from water and charge it. If the red LED is on, refer to troubleshooting or call for service.
Setup Your WYBOT C1 ⚙️
Turn on the device by pressing the on/off button. The front LED indicator will display solid blue when the device is on.
Connect to Your App ?
Download the WYBOT App by scanning the QR codes provided or from Google Play/App Store. Requires iOS 10.3 or later, or Android 4.3 or later. (Note: Only Osprey 700 Max and Osprey 700 Pro can connect to the App).
[Description of QR codes: One QR code for iOS app download, another for Android app download.]
Choose Your Cleaning Mode ?
Preset cleaning modes via the App. The default mode is "Wall then floor".
| Mode | Cleaning Range |
|---|---|
| Overall | Wall+ Floor+Waterline |
| Floor only | Floor |
| Wall only | Wall |
| Wall then floor | Wall *1 + Floor *1 |
Note: If the device restarts, it will enter the last used cleaning mode.
Preset Your Cleaning Cycle via the App ⏳
Schedule cleaning cycles using the "cycle timer" on the app. Different modes offer various durations and frequencies (e.g., Mode 1: 120min x 1, Mode 2: 60min x 2, Mode 3: 40min x 3, Mode 4: 30min x 4).
Note: Ensure the cleaner is fully charged for cycle cleaning. The default cycle is 2 hours. Complete all selected cycles.
Note: For optimal cleaning, ensure water depth is at least 19.5 inches (50 cm) from the top of the device.
Run Your WYBOT C1 ▶️
Hold the handle and place the cleaner into the pool. It will sink to the floor to empty trapped air. The device will turn off if not placed in the pool within 3 minutes.
[Description of diagram: The WYBOT C1 cleaner is shown being placed into a pool and sinking to the bottom.]
Operation and Maintenance
Auto Calibration and Cleaning ⚙️
After about 20 seconds of auto calibration on the floor, the indicator light turns flashing blue, indicating the cleaner is ready. The cleaner then starts cleaning walls, floor, and waterline as per your settings.
[Description of diagram: The cleaner is on the pool floor with a grid overlay, indicator light flashing blue.]
[Description of diagram: The cleaner is shown moving along the pool floor, walls, and waterline.]
Stopping and Removal ✋
The device will automatically move to the pool edge when cleaning is finished or the battery is low.
[Description of diagram: The cleaner is shown stopped at the pool edge.]
Use the included hook with a pool rod to lift the cleaner out of the pool.
[Description of diagram: A hook is inserted into the cleaner, and it is being lifted out.]
Take the cleaner out vertically to drain inside water quickly.
[Description of diagram: The cleaner is held vertically to drain water.]
Note: If a cleaning cycle other than the default was set, leave the cleaner in the pool to complete the whole cycle.
Filter Cleaning ?
Steps:
- Hold the filter cover handle, press, and open it.
- Ensure the device is powered off before opening the top cover.
- Clean the filter basket before it dries.
- Take out the filter basket.
- Empty all debris and rinse it with clean water.
- After rinsing, put the filter basket back into the cleaner and close the cover.
[Description of filter cleaning diagrams: Sequence showing opening cover, removing basket, emptying/rinsing, and replacing basket.]
Device Specifications
| Parameter | Specification |
|---|---|
| Name | WYBOT C1 |
| Pool Size | 75㎡ |
| Depth | 9.8ft (3m) |
| Device Dimension | 14.5(L)*14.0(W)*9.4(H) inches / 372(L)*360(W)*240(H) mm |
| Weight | 8kg |
| Runtime | 2 hours |
| Charging Time | 2.5 hours |
| Power | 65W |
| Charger Input | 100-240V, 50-60Hz |
| Charger Output | 25.2V/2.6A |
| Battery Capacity | 4600mAh |
| Filter | 180μm |
| Flow Rate | 11.5 m³/H |
| Moving Speed | 16m/min |
| Water Resistance | IPX8 |
| App Connection | Available |
| OTA Update | Available |
Limited Warranty
All WYBOT pool cleaners are inspected and licensed. Warranty duration for battery, motor, and PCB is two (2) years from purchase. Consumable parts (filter basket, brush, wheels) are excluded. Warranty applies to original buyers only and is not transferable.
Damages from improper use, unauthorized repair, or disassembly are not covered. Proof of purchase (order number/record) is required for claims.
How to Maintain Your Device
Follow these steps for optimal performance:
- Ensure the device is powered off.
- Dry the cleaner and filter basket.
- Fully charge the battery.
- Store in a cool, ventilated place away from direct sunlight, heat, frost, or squeezing, with ambient temperature between 5°C/41°F and 45°C/113°F.
- Charge the cleaner every three months to maintain optimal battery life.
Note: If the device does not work after prolonged low battery or being off, contact after-sale support. Do not disassemble without authorization.
FAQ & Troubleshooting ❓
Common Questions:
Q: What pool shapes and construction materials is the cleaner suitable for?
A: Suitable for rectangular, oval, or irregular in-ground pools. Applicable materials include PVC, gunite. Slippery materials like tiles or mosaics may require modification.
Q: Will obstacles like steps, shallow areas, or drains affect operation?
A: The machine can climb steps, drains, and navigate shallow water areas.
If you encounter issues, check the table below or contact after-sale team.
Troubleshooting Table:
| No. | Issues | Details | Possible Causes | Suggested Solution |
|---|---|---|---|---|
| 1 | Device does not work | A solid red light | Impeller is stuck | Check the impeller and clean foreign debris. |
| A flashing red light | Motor protection | Restart. | ||
| 2 | A flashing red light | Not put the device into the water or pool water is too shallow | Restart and place into the pool. Ensure water depth is over 0.5m. | |
| A flashing yellow light | Battery low | Fully charge the device and restart. | ||
| Unable to charge | Charger light flashes | Poor contact | Re-plug the charger. | |
| 3 | Do not climb walls | Slippery construction materials | Stick floating parts (Contact service team for instruction.) | |
| Too dirty water | Filter basket blocked | Clean the filter basket. | ||
| 4 | Abnormal wall climbing | Climbing slowly | Filter basket blocked | Clean the filter basket. |
| Sinking down away from wall or floating on the water | Intake air | Stick floating parts (Contact service team for instruction.) | ||
| Filter basket blocked | Clean the filter basket. | |||
| 5 | Only clean part area and cannot clean the entire pool | Wrong cleaning mode | Connect to the App and re-choose a suitable cleaning mode. | |
| 6 | Firmware not the latest | Connect to the App and update the firmware. | ||
| 7 | Front side up when on the floor | Filter basket blocked | Clean the filter basket. | |
| 8 | Do not clean as set cleaning path | Encounter obstacles | Clean the filter basket. | |
| Unable to connect to the App | Device power off | Restart. | ||
| The APP cannot be connected when the device is in the pool | Not available | Connect the device on the shore. |
Note: If you cannot find a solution from the table, please contact the after-sale team.
Certifications and Customer Care
WYBOT robotic pool cleaners have passed performance and reliability tests and obtained relevant certifications. You can rest assured.
Certifications: CE ?, FC ?, ROHS ?, Intertek ?, ETL US ?
[Description of certification logos: CE, FC, ROHS, Intertek, ETL US logos are displayed.]
WYBOT Customer Care:
- Email: support@wybotpool.com
- Facebook: @WybotPool
- Tel: 1-866-777-6655
Note: Products are subject to change for continuous improvement. Contact after-sale team for any problems or visit www.wybotpool.com for details.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference and acceptance of any received interference. Changes or modifications not approved by the responsible party may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If not installed and used per instructions, it may cause interference. No guarantee of no interference in a particular installation.
If interference occurs, try measures like reorienting the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for help.
To maintain FCC RF Exposure compliance, install and operate with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.
