WYBOT M1 Robotic Pool Cleaner User Manual
Thank you for choosing WYBOT products. Your support means a lot to us. Continuously providing the best solution to free you up from pool cleaning and enjoy your family time is always our pursuit.
The WYBOT Robotic Pool Cleaner is dedicated to serving you high efficiency, low power consumption, easy operation, and thorough pool cleaning work. Its unique appearance and reliable functions, such as one-button activation, powerful suction and scrubbing, fine filtration, smart navigation, remote control, and high compatibility with various pool shapes and construction materials, assure you a convenient, intelligent, and optimal pool cleaning.
Feel free to contact WYBOTICS Co., Ltd. by Email or visit our website with any questions. We are very glad to hear your advice on our continuous improvement.
WYBOT M1 AT A GLANCE
Product External Overview
a) On/Off Button: Turn on/turn off the device.
b) Handle: Remove and transport the device with it.
c) Pump: Pumps out water through the window.
d) Charging Port: Connect the charger.
e) Track: Enhances the device's capability in climbing walls and various obstacles.
f) LED Indicator: Different light colors indicate device status.
g) Scrubbing Brush: Loosens all dirt and rolls them into the device.
h) Lid Open Button: Opens the cover to take out the filter basket.
Product Internal Overview
i) Sealed Part: Important components are sealed here. For your safety, do not attempt to disassemble it without authorization.
j) Filter Basket (180µm): Stores collected dirt and debris; needs to be installed before cleaning and washed after each use.
k) Filter Foam (Cotton foam): An auxiliary filter to help trap fine dirty particles. Please do not install it when the pool water is heavily dusty, as it may influence the cleaner's operation. Recommended for floor cleaning.
Warning: Do not operate the device when the top cover or scrubbing brushes are broken. If there is any liquid leakage from the sealed part, stop charging or running the device.
GET STARTED
Charge your new WYBOT M1
The device has a lithium-ion rechargeable battery and needs to be charged before first use and when the battery is low. Connect your device to a power outlet using the included cable and adapter.
Notes:
- For your important safety, double-check that the device is powered off and the charging port is dry before charging.
- To reduce fire risk, keep your device and adapter away from direct sunshine or water when charging.
- When charging, ensure your device is at least 3m (approx. 10ft) away from the edge of the pool.
- The best charging environment is a temperature between 0°C - 35°C (32°F - 95°F) and RH at 5%-95%.
The adapter has an indicator that displays a blue light, indicating the power supply status. The LED indicator on the front of the device will flash green while charging, and all LED lights will turn solid when fully charged.
LED Light Indications:
| LED Light | Indication | Status |
|---|---|---|
| Solid | Power On | |
| Flashing | Under working | |
| Solid | Connecting to App | |
| Flashing | Low battery or under self-parking in the pool | |
| Solid | Charging in progress | |
| Solid or flashing | Fully charged | |
| Solid | Fault |
Setup your new WYBOT M1
Turn on the device by pressing the on/off button. The LED indicator on the front will display a solid green to show the current battery level, and then a solid blue when the device is on. If the battery level is too low to start cleaning, the LED lights will show a flashing indication.
Battery Level Indication:
| Quantity | Battery Level (%) |
|---|---|
| 0~20 | |
| 20-40 | |
| 40-60 | |
| 60-80 | |
| 80-100 |
Note: Low battery!
Run your new WYBOT M1
Connect to your App
Download the WYBOT App to your smart mobile device by scanning the QR code below, or from Google Play or the App Store.
- iOS: iOS 15.0 or later
- Android: Android 8.0 or later
Choose your cleaning mode
After connecting to the App, you can choose a cleaning mode. There are 7 cleaning modes:
| Mode | Cleaning Coverage |
|---|---|
| Standard Full Pool | Wall+Floor+Waterline |
| Floor Only | Pool Floors |
| Wall Only | Pool Walls |
| Waterline | Pool Waterline |
| Wall then floor (Combo) | Wall *1 + Floor *1 |
| Eco floor | Eco mode, floor cleaning only |
| Turbo Floor | Strong cleaning, floor cleaning only |
Notes:
- You can modify your cleaning modes via the App when the device is out of the pool. The default mode is Wall then floor.
- If the device restarts, it will automatically enter the cleaning mode you set last time.
Note: To achieve optimal cleaning performance, ensure the water depth of the pool is at least 50 cm (19.5 inches) from the top of the device.
Cleaning Process:
- Hold the handle of the cleaner and put it into the pool vertically.
- Let it sink down to the floor to empty trapped air inside.
- After about 30 seconds of self-calibration, the indicator light will turn to a flashing blue. The cleaner is ready to clean.
- The cleaner begins to clean walls, floor, and waterline as default or as set through the App.
DO A FILTER CLEANING
Note:
- Ensure the device is powered off when opening the top cover.
- Clean the filter basket after each use.
- Press the filter cover handle and lift the cover up.
- Take out the filter basket.
- Empty all debris and rinse it with clean water.
- After rinsing, put the filter basket into the cleaner and close the cover.
Storage Instructions:
- As electric components are inside the cleaner, store the cleaner in a cool and ventilated place, away from direct sunshine or any heat source.
- Charge the cleaner prior to being stored for a long time (over 6 months) to maintain optimal battery life.
DEVICE SPECIFICATION
| WYBOT M1 | |
|---|---|
| Model | Up to 4305 sq.ft (400m²) |
| Pool Size | 9.8ft (3m) |
| Depth | 460(L)*420(W)*230(H) mm / 18(L)*17(W)*9(H) inch |
| Device Dimension | 11 Kg |
| Weight | 5 hours |
| Runtime | 3.5 hours |
| Charging Time | Battery/25.5V |
| Voltage | 120W |
| Power | 100-240V, 47-63Hz |
| Charger Input | 29.4V/4A |
| Charger Output | 10000mAh |
| Battery Capacity | Double-level |
| Filtration | 15m³/H (3963GPH) |
| Flow Rate | 10m/min (36ft/min) |
| Moving Speed | IPX8 |
| Water Resistance | Available |
| OTA upgrading | Available |
| App Connection |
HOW TO MAINTAIN YOUR DEVICE
Follow these steps to store your cleaner to maintain good performance:
- Ensure the device is powered off.
- Dry out the cleaner and filter basket.
- Fully charge the battery.
- Store the cleaner in a cool and ventilated place, away from direct sunshine, heat sources, frost, and squeezing, with an ambient temperature between 5°C/41°F and 45°C/113°F.
- Charge the cleaner every three months to ensure optimal battery life.
Note: If your device does not work after a long-term low battery life or being off, please contact the after-sale team for help. For your safety, do not attempt to disassemble it without authorization.
LIMITED WARRANTY
1. All WYBOT pool cleaners have been inspected and licensed to be sold as per local laws.
2. The warranty duration for battery, motor, and PCB is two (2) years from the purchasing date. Consumable parts, including filter basket, brush, wheels, etc., are beyond warranty.
3. The warranty applies only to original buyers and is not valid for resale or any other transfer.
4. Any damages to the unit caused by improper use, unauthorized repair, or disassembly are not covered by WYBOTICS Co., Ltd.'s warranty.
5. The order number or record must be presented for any claim or repair within the warranty period.
FAQ & TROUBLE SHOOTING
Q: What pool shapes and construction materials is the cleaner suitable for?
A: The machine can be applied to rectangle, oval, or irregular shapes of in-ground swimming pools. Applicable construction materials include PVC, gunite, tile, and other materials.
Q: Will obstacles such as steps, shallow water areas, drains, slopes, etc., in the swimming pool affect the running?
A: The machine can climb steps, drains, and shallow water areas. The above obstacles may influence its cleaning path but will not affect the operation of the machine.
If you encounter the following situations when using the cleaner, you can check the table and solve them by yourself.
Note: If you cannot find a solution from the table, please contact the after-sale team.
| No. | Issues | Details | Possible Causes | Suggested Solution |
|---|---|---|---|---|
| 1 | Device does not work | A solid red light | Impeller is stuck | Check the impeller and clean foreign matter. |
| A flashing red light | Motor protection | Restart. | ||
| A flashing red light | Not put the device into the water or the pool water is too shallow | Restart and put it into the pool immediately. Be sure the water depth is over 0.5m. | ||
| 2 | Unable to charge | A breathing yellow light | Battery low | Fully charge the device and restart. |
| Charger light flashes | Poor contact | Re-plug the charger. | ||
| 3 | Do not climb walls | Slippery construction materials | Stick adhesive blocks (Contact after-sale team for instruction). | |
| Too dirty water | Clean the filter basket. | |||
| 4 | Abnormal wall climbing | Climbing slowly | Filter basket blocked | Clean the filter basket. |
| Sinking down away from wall or floating on the water | Intake air | Stick adhesive blocks (Contact after-sale team for instruction). | ||
| Filter basket blocked | Clean the filter basket. | |||
| 5 | Only clean part area and cannot clean the entire pool | Wrong cleaning mode | Connect to the App and choose a suitable cleaning mode. | |
| 6 | Front side up when on the floor | Filter basket blocked | Clean the filter basket. | |
| 7 | Do not clean as set cleaning path | Encounter Obstacles | Help the machine away from the obstacle. | |
| Stuck at water drains | Drain height is over 3cm | Help the machine away from the obstacle. | ||
| 8 | Unable to connect to the App | Device power off | Restart. | |
| The App cannot be connected when the device is in the pool | Not available | Connect the device on the shore. |
CERTIFICATION
WYBOT robotic pool cleaners have passed all performance and reliability tests and also obtained relevant certifications from the countries in which they are sold. You can rest assured.
CE FC C US Intertek ROHS
WYBOT CUSTOMER CARE
Due to the need for continuous product improvement, the products in the manual are subject to the real products, and WYBOTICS Co., Ltd. reserves the right to update products.
If you encounter any problems during use, please contact the after-sale team.
For more details, please visit WYBOTICS website: www.wybotpool.com
Wybot Customer Service:
- Email: support@wybotpool.com
- Facebook: @WybotPool
- Tel: 1-866-777-6655
