Best Choice Products SKY6711 Rechargeable Infrared Laser Tag Blasters

About Best Choice Products

As shoppers, we're always trying to find the perfect balance between quality & value. At BCP, we believe we've achieved that. Our diverse catalog of everyday essentials is tailored especially to our customers & guaranteed to hit that sweet spot of high quality & low price. Always.

Important Notices & Warnings

NOTICE

• Avoid exposure to direct sunlight and excessive heat.
• Do not immerse product in water.
• Do not alter this product in any way as it may result in personal injury, product failure, and property damage.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with manufacturer's instructions as this could void the product warranty.
• Only use the provided adapter; using any other adapter may damage the equipment.
• This product does not involve actual lasers; it uses infrared technology to project an invisible beam.
• This product is intended for residential use only.

WARNING

• Adult supervision is recommended.
• Only use or replace the battery and charger specified by the manufacturer.
• Do not submerge this product in water or expose to moisture.
• Do not place this product near or next to a heat source: fire, electronic heating devices, etc.
• Do not strike, drop, or place heavy objects on the blasters or charging stations.

Blaster Diagram

The blaster features the following components:

• Infrared Receiver: Detects infrared signals from other blasters.
• Infrared Emission: Projects the infrared beam.
• Charging Port: Connects to the charging station.
• Blasting Indicator: Shows when the blaster is firing.
• Team Light: Indicates the selected team color.
• Fire-Type Selection: Button to choose firing mode.
• Team Selection: Button to choose team.
• Life Indicators (3): Displays remaining health points. Each indicator represents 3 health points (9 total).
• Power Switch: Turns the blaster on/off.
• Trigger: Fires the blaster.
• Reload: Button to reload ammunition.

Life Indicators: Each life indicator represents 3 health points (9 total). When the battery is low, the 3 life indicators will flash slowly. The maximum strike distance is 130 Feet.

Operating Instructions

1. Switch On: Turn the blaster on. It will default to single shot mode.
2. Team Selection: Press the team selection button to cycle through four team colors: Blue, Red, Green, and White. Players cannot hit teammates. Team changes are not permitted during a game.
3. Fire-Type Selection: Press the Fire-Type Selection button to choose one of four firing modes: Single, Laser, Repeating, or Plasma.

   Fire-Type Selection	Single	Laser	Repeating	Plasma
   Shots	●●●●●	●●●●	●●●●●●●●	●
   Health reduced by each shot	❤️	❤️	❤️❤️	❤️❤️❤️

   When you run out of ammo, press the reload button under the grip to reload.
4. Aim and Fire: Aim at an opponent's blaster and fire. A hit is registered when an opponent's life indicator reduces, and the blaster vibrates and emits a sound. The life indicators show different levels of health:
   • 1 health point lost: Indicator shows slow blinking.
   • 2 health points lost: Indicator shows fast blinking.
   • 3 health points lost: Indicator goes dark.
   When all life indicators reach 0, the blaster will play "Game Over," all indicators will be dark, and the blaster will be disabled.

Reset Blaster

• Players cannot change teams or reset a blaster during a game.
• To change your team before a game, use the team selection button.
• To reset a blaster, switch it off and then on again.

Charging Diagram and Information

The charging station allows for simultaneous charging of up to four blasters.

Components:

• Blaster Charging Ports: Slots where blasters are inserted.
• Adapter Input: Port for the power adapter.
• Power Adapter: Connects the charging station to a wall outlet.

NOTE: Only use the provided adapter; using any other adapter may damage the equipment.

• A blaster provides approximately 6 hours of run time on a full charge for regular play.
• Setup: Plug the round end of the power adapter into the adapter receiver on the charging station, and the other end into a wall outlet.
• Charging: Insert a blaster into one of the four charging ports, pressing it down firmly to connect. All four blasters can be charged simultaneously.
• When charging begins, the blaster's lights will turn off. The status light on the blaster will circulate twice. The adapter light will turn 'Red' when powered on.
• Charging takes approximately 1.5 to 2 hours. All lights will go out when charging is complete.

Troubleshooting

NOTE: If normal operation is disturbed or interrupted, strong electro-magnetic interference may be the cause. Reset the product by turning it off completely, then back on.

Maintenance and Repair

• If the item will not be used for an extended period, remove all batteries to prevent degradation and damage.
• Clean off dust with a dry cloth.
• Do not leave this product exposed to excessive heat or sunlight.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Responsible Party (for FCC matters only)

Quality Control Dept.
15101 Red Hill Ave.
Tustin, CA 92780

Help Center & Warranty

Help Center

Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com

? Chat Support | Product Inquiry | Orders FAQ | Product Assembly | Returns & Refunds

Product Warranty Information

All items can be returned for any reason within 60 days of receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.

All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.

All returns must be shipped back to the Best Choice Products Return Center at the customer's expense. If the reason for return is a result of an error by Best Choice Products, then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and it is the customer's responsibility to either use the original shipping boxes or purchase new boxes.

Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer's responsibility until the item has been received by and acknowledged by Best Choice Products as undamaged.

© 2023 Best Choice Products, Inc. All rights reserved. Distributed by Best Choice Products, Inc. Tustin, CA 92780

General Warning

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.