Akyga AK-ND-81 USB-C Power Supply User Manual

Short Description

The Akyga AK-ND-81 power supply is used to deliver power to tablets and devices with direct current. The 65W power supply is compatible with all 5-20V / 3-3.25A models with USB-C plug. A set of protectors OVP, OTP, OPP, SCP, OCP and the soft start technology provides safe and stable work of both power supply and powered device.

The product is adapted to supply voltage in the range of 110-240V, 50/60Hz. The power consumption of the supplied device cannot exceed the power supply nominal current.

The product is compatible with the applicable national and European requirements.

What's in the Box?

• AK-ND-81 power supply
• Short user manual

Symbols Explanation

⚠️ [Warning]

There is a particular danger connected with service.

⚡ [Electric Shock Risk]

There is a risk of losing health or life (e.g. by electric shock).

[Information]

Important tips and information.

[CE Certified]

The CE standard description on the product is the manufacturer's declaration that the marked product meets the requirements of the directive so-called The "New Approach" of the European Union (EU). For security and certification (CE) reasons, the device cannot be rebuilt or changed in any way. In the reason of using the power supply for other purposes than those described, the product may be damaged. The incorrect use may also cause hazards such as short-circuits, burns, electric shocks, etc. Read the user manual carefully and keep it for later use. The product could be shared with a third party only with the user manual included.

♻️ [WEEE Symbol]

Product in accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket placed on the product means that the marked product cannot be disposed of with other household waste. After use, the product must be returned to a collection point for used electrical and electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent processing, recovery, or destruction contributes to avoiding negative effects on the environment and health, and also allows the recovery of raw materials from which the product is made.

? [RoHS Compliant]

The RoHS mark on the product is the manufacturer's declaration that the marked product meets the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which aims to reduce the amount of hazardous substances penetrating into the environment from electrical and electronic waste.

Safety Precautions

The device is a II protection class device. It provides protection against electric shock against direct and indirect contact, and thanks to the additional isolation it is not necessary to connect the device case with the protective earth conductor.

The device is intended only for domestic use, indoors.

⚠️ WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power supply, do not place it in a restricted ventilation area. Also, do not allow the working power supply to touch soft surfaces such as pillows, blankets, or clothing. The power supply meets the limits on the surface temperatures available to the user, as defined in the International Standard for Safety of Information Technology Equipment (IEC 60950).

Connecting a notebook whose demanded power is greater than the power of the power supply can cause battery failure or even damage (burn) of the power supply.

An electrostatic discharge occurs when two objects touch each other, for example, an electric charge that occurs when a user touches a metal door handle after walking on a carpet. Discharging electrostatic charges from fingers or other electrostatic conductors can damage electronic components. To avoid damaging the computer, abstain from touching electrical outlets, wires, and electronic circuits. The user's contact with electronic components should be kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect of disobeying the safety instructions and information contained in this user manual.

• Keep the product and the packaging out of reach of children and animals. The package includes a foil that a child could choke on while playing.
• It is forbidden to apply mechanical load to the product - strong shocks, impacts, dropping, or crushing may cause its damage.
• The product operation in adverse conditions is not allowed. Adverse conditions are primarily: exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high humidity, surroundings of gases, dusts, or flammable and aggressive liquids.
• If the product has been damaged, does not work properly, or has been stored for a long period of time in bad or unfavorable conditions, safe operation of the device is not possible. It is essential to stop using the product and to protect it against re-use for security purposes.
• Product and power cord should not be touched with moist or wet hands under any circumstances.
• Short-circuiting the current connection is prohibited.
• Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges, or mechanically loaded in any other way. Avoid thermal load of the cable - in particular, keep away from heat sources (such as stoves, radiators, fireplaces).
• Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
• It is forbidden to modify the power cord. In the case of modifications, the cable may be damaged, causing threats to life, health, and property.
• Connection of the power supply to electricity is done by connecting the cable with the CEE 7/16 plug (Europlug) to a grounded electrical outlet.
• Before connecting the adapter to the mains socket, make sure that the voltage specified on the power supply matches the voltage supplied to the household socket.
• Mains plug should be disconnected from the power socket if the product is not in use for a long time.
• When disconnecting the power cord from the socket and from the device, do not pull on the cord, but only on the part of the cable plug provided for this purpose.
• In case of any doubts regarding operation, safety, or connection of the product, please contact the manufacturer or a qualified specialist for this purpose.
• All maintenance, adjustment, and repair work on the product may only be carried out by a qualified person in a specialist facility.

Removing the Most Common Problems

Preparing the Power Supply for Use

1. Plug the power adapter into an electrical outlet.
2. Connect the power adapter plug to your tablet or other device.
3. Switch on the device you are charging.

Cleaning the Power Supply

Disconnect the power supply from the electrical socket and connected devices before cleaning.

• Use a soft and antistatic cloth for cleaning the power supply.
• Do not use abrasive or chemical cleaners.

Technical Specification

Product Manufacturer

Akyga Europe sp. z o.o.

ul. Wrocławska 1c

52-200 Suchy Dwór