Edifier CC200 Wireless Mono Headset

Introduction

This document provides essential information for the Edifier CC200 Wireless Mono Headset. For the full user manual and further details, please visit the official Edifier website: www.edifier.com.

For user safety, compliance, and optimal performance, please read the safety instructions carefully and use the product in accordance with them.

Product Description and Accessories

Product Overview

The Edifier CC200 is a wireless mono headset designed for clear communication. It features a comfortable, adjustable design with a boom microphone.

Headset Components

The headset includes the following key components:

• Power button: Used for turning the headset on/off and initiating pairing.
• Up button: Controls volume up and previous track.
• Down button: Controls volume down and next track.
• Phone call button: Used for answering/ending calls, redialing, and voice assistant activation.
• Charging port: For connecting the charging cable.
• Microphone: A boom microphone for clear voice input.

Included Accessories

The package typically includes:

• Charging cable (USB-A to USB-C)
• User manual

Note: Images are for illustrative purposes only and may differ from the actual product.

Operating Instructions

Power On/Off

• Power On: When the headset is off, press and hold the power button for 3 seconds. The green light will be lit for 1 second.
• Power Off: When the headset is on, press and hold the power button for 3 seconds. The red light will be lit for 1 second.

Charging

• Connect the headset to a power source using the included charging cable.
• Charging Indicator: A steady red light indicates charging. The red light turns off when fully charged.
• Input: 5V ⎓ 500mA (USB power source).

Warning: Rechargeable batteries must be disposed of properly for recycling. Do not dispose of batteries in fire, as this can cause an explosion.

Bluetooth Connection

Initial Use and Connecting to the Last Device

For initial use, press and hold the power button for 3 seconds to power on. The red and green lights will flash rapidly and alternately. On your mobile phone, search for and connect to "EDIFIER CC200". For subsequent use, the headset will automatically connect to the last connected device.

Connecting to New Devices (Pairing)

• When the headset is off, press and hold the power button for 5 seconds to enter Bluetooth pairing mode. The red and green lights will flash rapidly and alternately.
• On your mobile phone, search for and connect to "EDIFIER CC200".
• After successful pairing, the green light will flash twice rapidly and then turn off.

Clear Pairing

When the headset is on and not connected to any devices, simultaneously press and hold the "+" and "-" buttons for 5 seconds. This will clear existing pairings and enter Bluetooth pairing mode. The green light will flash 6 times rapidly upon successful clearing.

Functional Operations

When Not in a Conversation:

• Single press (Phone call button): Play/Pause music.
• Double press (Phone call button): Activate voice assistant.

When in a Conversation:

• Single press (Phone call button): Mute/Unmute microphone.
• Single press (Up button): Volume up.
• Press and hold (Up button): Play previous track.
• Single press (Down button): Volume down.
• Press and hold (Down button): Play next track.
• Single press (Phone call button): Accept or end a call.
• Press and hold for 2 seconds (Phone call button): Decline a call.
• Double press (Phone call button): Redial the last number.

Three-Way Calling:

When a second call (Call B) rings while you are on an active call (Call A):

• Press (Phone call button): Accept Call B and put Call A on hold.
• Double press (Phone call button): Accept Call B and end Call A.
• Press and hold for 2 seconds (Phone call button): Decline Call B.
• Double press (Phone call button, when accepting Call B and remaining on Call A): Switch between Call A and Call B.

Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ISED Regulatory Compliance

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation.

(French translation: L'émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : L'appareil ne doit pas produire de brouillage; L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

EU Declaration

Frequency Band: 2.402GHz ~ 2.480GHz

RF Power Output: ≤20 dBm (EIRP)

There is no restriction of use.

Manufacturer Information

Model: EDF200042

FCC ID: Z9G-EDF149

IC: 10004A-EDF149

Manufacturer: Edifier International Limited

Address: P.O. Box 6264, General Post Office, Hong Kong

Website: www.edifier.com

Copyright: © 2021 Edifier International Limited. All rights reserved.

Printed in: China

Notice

For technical improvement and system upgrades, information contained herein may be subject to change without prior notice. Products of EDIFIER may be customized for different applications. Pictures and illustrations shown in this manual may differ slightly from the actual product. If any difference is found, the actual product prevails.

Document Version: V1.2/IB-200-000000-14

Manufacturing Details (Chinese): 名 称: 说明书 FCC ISED 认证说明-便携式音箱及耳机, 材 质: 80g 书纸, 版面设计, 尺 寸: 125×120 (MM), 校 对, 批 准, 版本号及料号: V1.2/IB-200-000000-14, V1.1 改 IC 警告语/V1.2 IC 改为 ISED 和更改部分文字说明.