Edifier WH700NB Wireless Noise Cancellation Over-Ear Headphones

Power ON/OFF

To power on, press and hold the power button [Power Button] for approximately 3 seconds until the green LED blinks. To power off, press and hold the power button [Power Button] for approximately 3 seconds until the red LED blinks.

Note: The headphones will automatically power off after 5 minutes of inactivity if noise cancellation is off, or after 4 hours if noise cancellation is on, without a Bluetooth connection.

Pairing

Pairing for the first time: Press and hold the power button [Power Button] for approximately 3 seconds when powered off. The red and green LEDs will blink alternately. Select "EDIFIER WH700NB" in your Bluetooth device settings to connect. The green LED will blink twice in 5 seconds upon successful connection.

Pairing for a new device: Press and hold the power button [Power Button] for approximately 3 seconds when powered on to skip the latest connected device and enter pairing mode for a new Bluetooth device. The red and green LEDs will blink alternately. Select "EDIFIER WH700NB" in your Bluetooth device settings to connect. The green LED will blink twice in 5 seconds upon successful connection.

For subsequent use, the headphones will automatically connect to the last used device.

Dual-Device Connection

1. Pair Bluetooth device A with the headphones.
2. With headphones powered on, press and hold the power button [Power Button] for approximately 3 seconds to re-enter Bluetooth pairing mode (red and green LEDs blink alternately). Device A will disconnect.
3. Select "EDIFIER WH700NB" in Bluetooth device B settings to connect successfully.
4. Select "EDIFIER WH700NB" in Bluetooth device A settings to connect manually.

Notes:

• When a call is received, the headphones will automatically switch to the calling device. After the call ends, they will switch back to the original device.
• A voice assistant can be activated on the latest active smartphone if two smartphones are paired simultaneously.
• To switch between devices, pause music on the current device and start playing audio on the second device.
• Each time the headphones are powered on, they will automatically reconnect with the two most recently connected devices within range.

Reset

Simultaneously press and hold the volume up [➕] and volume down [➖] buttons for approximately 5 seconds until the green LED blinks 6 times. This clears all Bluetooth pairing records and re-enters Bluetooth pairing mode, indicated by alternating red and green LEDs.

Status Light

Charging: Connect the headphones to a power source using the included [USB-C Cable] for charging. The red LED will be steadily lit while charging and will turn off when fully charged.

Input: 5V ⎓ 1A

Note: Do not charge the headphones if there is sweat or other liquids inside the charging port, as this may damage the headphones.

Controls

The multifunction button and ANC/Mode button control various functions:

Multifunction Button:

• [▶️] x1: Play/Pause music
• [▶️] x2: Next track
• [◀️] x1: Previous track
• [➕] x1: Volume up
• [➖] x1: Volume down
• [Call/Voice Button] x1: Answer/End call
• [Call/Voice Button] x2: Reject incoming call
• [Call/Voice Button] 3s: Activate voice assistant

ANC/Mode Button:

• [ANC] x1: Cycle through Noise Cancellation, Ambient Sound, and Wind Reduction modes.
• [ANC] 3s: Toggle between Noise Cancellation and Ambient Sound modes.
• [ANC] x2: Toggle Wind Reduction mode.

Note:

• [Call/Voice Button] indicates pressing and holding a button.
• Default sound control modes are Noise Cancellation, Ambient Sound, and Wind Reduction.
• Images are for illustrative purposes only and may differ from the actual product.
• Download the Edifier Connect App for more customizable control settings.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC statement: CAN ICES-003(B) / NMB-003(B).

FCC ID: Z9G-EDF208

IC: 10004A-EDF208

Input: 5V ⎓ 1A

EU Declaration of Conformity

Hereby, Edifier International Limited declares that the radio equipment type EDF200126 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html

Declaration for EU

Frequency Band: 2400MHz-2483.5MHz

RF Power Output: ≤16dBm (EIRP)

There is no restriction of use.

ANATEL Statement

This equipment is not entitled to protection against harmful interference and cannot cause interference in properly authorized systems.

For consultation: www.anatel.gov.br

Bluetooth SIG Statement

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.

NCC Statement and Hazardous Substances

NCC Statement: (Specific statement not fully provided in crops, but the following table details hazardous substance content.)

Restricted Substances and their Chemical Symbols:

Notes:

• "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence.
• The "-" indicates that the restricted substance corresponds to the exemption.