Edifier X3s True Wireless Stereo Earbuds

For user safety and compliances, also for the optimum performance, please carefully read safety instructions and use the product in accordance with them.

Product Description and Accessories

Two wireless earbuds are shown. Each earbud has a circular touch button on the top surface and a small indicator light. Lines point to 'Touch button' and 'Red/blue indicator'.

A compact charging case is depicted. Next to it is a USB Type-C charging cable. To the right are three pairs of silicone ear tips labeled S, M, and L.

Note: There are different sizes of ear tips attached in the package; please select the suitable ones to wear. Images are for illustrative purposes only and may differ from the actual product.

Operating Instructions

1. Charge

Charge the Earbuds: You may hear an audible warning ? with the red light flashing when the earbuds are at low battery level. Place the earbuds in the charging case for charging. A solid red light ? on the earbuds indicates charging; the red light off indicates fully charged.

Charge the Charging Case: Please connect the charging case to a power source with the included Type-C charging cable for charging. A solid red light ? on the case indicates charging; the red light off indicates fully charged. Input: 5V=200mA (earbuds), 5V=1A (charging case).

Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in fire to prevent an explosion. The power source used must be approved by relative departments and in accordance with electronic specifications of devices as well as local regulatory requirements (e.g., UL, CSA, VDE, CCC), otherwise there may be dangers of fire, explosion, etc.

2. Power On/Off

The earbuds will power on when taken out of the case.

The earbuds will power off when placed in the case.

3. Bluetooth Connection

For initial use, the earbuds will auto-enter Bluetooth pairing mode when taken out of the charging case. Bluetooth pairing mode: red and blue lights flash rapidly.

To connect to another mobile phone: Please take out the earbuds, and press and hold the touch button of the left or right earbud for around 2-3 seconds to enter Bluetooth pairing mode. The blue light is steady lit for 1 second.

Set mobile phone to search for and connect to "EDIFIER X3s". After pairing is successful, the blue light will flash slowly.

4. TWS Connection of the Left and Right Earbuds

The left and right earbuds have finished TWS pairing before leaving the factory. If the wireless connection fails to resume, please follow the steps below to re-pair: When the earbuds are in the charging case, respectively and quickly triple-click the touch buttons of the left and right earbuds until the blue lights flash rapidly, then the earbuds enter the TWS pairing mode of the left and right earbuds. After pairing is done, the red lights ? on the left and right earbuds will be steady lit.

5. Clear Pairing Records

When the left and right earbuds are interconnected and not connected to any Bluetooth devices, please take out the earbuds, and quickly triple-click the touch button of the left or right earbud until the blue light flashes rapidly. The pairing records of both earbuds will be cleared.

6. Functional Operation

Music Playback Mode

(Bluetooth already connected and you are not in a conversation)

Left Earbud: Play/pause: single click; Previous track: double click; Volume down: press and hold; Game mode switch: triple click.
Right Earbud: Play/pause: single click; Next track: double click; Volume up: press and hold; Voice assistant: triple click.

Call Mode

(Bluetooth already connected, and there is an incoming call or you are in a conversation)

Left/Right Earbud: Accept a call: single click; End/decline a call: press and hold for 2-3 seconds.

FAQs

When charging the charging case, the indicator is off.

Please ensure the charging case is correctly connected with power source.

No sound

Check if the earbuds are operating.
Check if the earbuds volume is at an appropriate level.
Check if the earbuds are correctly connected with mobile phone.
Check if the earbuds are operating within a normal working range.

The call quality of the earbuds is not good.

Check if the mobile phone is in an area with strong signal.
Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone.

When playing music, cannot control pause/play/previous track/next track via the earbuds.

Please ensure the paired device supports AVRCP (Audio/Video Remote Control Profile) profile.

Maintenance

If not used for long periods, please charge the product with lithium battery every three months.
Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product and causing damage.
Do not put the product in places exposed to sun or with high temperature. High temperature will shorten the service life of electronic components, damage the battery, and make plastic components deformed.
Do not put the product in cold places to avoid damaging the internal circuit board.
Do not dismantle the product. Non-professional personnel may damage the product.
Do not drop, strongly vibrate, or strike the product with a hard object to avoid damaging the internal circuit.
Do not use drastic chemicals or cleaners to clean the product.
Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting its facade.

Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory Compliance

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Identification and Contact

FCC ID: Z9G-EDF150

IC: 10004A-EDF150

Declaration for EU: Frequency Band: 2.402GHz ~ 2.480GHz. RF Power Output: ≤20 dBm (EIRP). There is no restriction of use.

Model: EDF200060

Manufacturer: Edifier International Limited

Address: P.O. Box 6264, General Post Office, Hong Kong

Website: www.edifier.com

NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

	EDIFIER X3S TWS True Wireless Stereo Earbuds User Manual Comprehensive user manual for the EDIFIER X3S TWS True Wireless Stereo Earbuds, covering product description, accessories, detailed operating instructions for charging, power on/off, pairing, reset, and controls, along with FAQs and important notices.
	Edifier X5 Pro True Wireless Earbuds with Active Noise Cancellation - User Manual User manual for the Edifier X5 Pro True Wireless Earbuds, detailing setup, pairing, controls, charging, and technical specifications. Features active noise cancellation and Bluetooth connectivity.
	EDIFIER X5 Pro True Wireless Earbuds with Active Noise Cancellation - User Manual User manual for EDIFIER X5 Pro True Wireless Earbuds, detailing setup, pairing, charging, controls, and compliance information. Features Active Noise Cancellation and Bluetooth connectivity.
	Edifier X5 Pro True Wireless Earbuds with Active Noise Cancellation - User Manual User manual for Edifier X5 Pro True Wireless Earbuds, covering setup, pairing, controls, charging, and compliance information. Features Active Noise Cancellation.
	Edifier X5 Xemal X True Wireless Stereo Earbuds User Guide Comprehensive user guide for the Edifier X5 Xemal X True Wireless Stereo Earbuds, detailing setup, pairing, functional controls, safety warnings, and disposal instructions.
	Edifier X3 True Wireless Stereo Earbuds User Manual User manual for the Edifier X3 True Wireless Stereo Earbuds, covering functional operation, pairing, and safety precautions in multiple languages.
	Edifier X3 True Wireless Stereo Earbuds User Manual Concise guide to operating, pairing, and using the Edifier X3 True Wireless Stereo Earbuds, including touch control functions and Bluetooth connectivity.
	Edifier NeoBuds Planar True Wireless Earbuds - Compliance Information and Specifications Official compliance statement and regulatory information for Edifier NeoBuds Planar True Wireless Noise Cancelling Earbuds (Model EDF200185). Includes EU, FCC, and ISED declarations.