Edifier K750W Wireless Stereo Headset with Microphone
This manual provides instructions for operating the Edifier K750W Wireless Stereo Headset with Microphone.
1. Power ON/OFF
Press and hold the Multi-function button (MFB) for 1 second to power the headset ON or OFF.
2. First Pairing
Once powered on, the headphones will automatically enter Bluetooth pairing mode. Select "EDIFIER K750W" from your device list to connect.
3. Pairing for a New Device
With the headset powered off, press and hold the MFB for 6 seconds to enter Bluetooth pairing mode. Select "EDIFIER K750W" from your device list to connect. The headphones will automatically connect to the last used device for subsequent use.
4. Multipoint Connection
To connect to two devices simultaneously:
- Pair device A with the headphones successfully.
- With the headset powered off, press and hold the MFB for 6 seconds to enter Bluetooth pairing mode, then select "EDIFIER K750W" in device B's settings to connect.
- Select "EDIFIER K750W" again in device A's settings to connect. The multipoint connection is now complete. The headphones will automatically reconnect to the two most recently used devices upon subsequent use.
5. Controls
- Music: Press the MFB once (x1) to play/pause.
- Call: Press the MFB once (x1) to answer/end a call. Press and hold the MFB to reject a call. Double press the MFB (x2) to redial the last number.
- Mode: Press the volume up (+) button once (x1) to increase volume. Press and hold the volume up (+) button to skip to the next track. Press the volume down (-) button once (x1) to decrease volume. Press and hold the volume down (-) button to go to the previous track.
Note: Download the EDIFIER ConneX App for more customizable control settings. The default sound mode is Sidetone mode.
6. Reset
With the headset powered on, press and hold the "+" and "-" buttons simultaneously for approximately 5 seconds to reset the headphones. Upon successful reset, the headphones will automatically enter Bluetooth pairing mode.
7. Charging
Connect the headphones to a power source using the provided USB-C cable for charging. Input is 5V - 1A. Ensure the USB-C port is completely dry before charging. The headphones power off automatically during charging.