MaxO2®+A Oxygen Analyzer
SENSING | ANALYSIS | DELIVERY
MAXO2+A OVERVIEW
The MaxO2+A was designed with simplicity and portability in mind. This analyzer quickly adapts for use in tubing applications and is ideal for checking oxygen percent accuracy in line or on concentrators. Its patented ergonomic design fits comfortably in your hand and features a simple one-touch on/off and calibration. The MaxO2+A will calibrate to room air (20.9%) or 100% oxygen. For applications needing an external sensor, Maxtec offers the MaxO2+AE.
Patented ergonomic design fits comfortably in your hand.
PART NUMBERS
- MaxO2+A: R217P62
- MaxO2+A w/Flow Adapter: R217P62-004
ACCESSORIES
- 15mm Tee Adapter: RP16P02
- Flow Diverter: R110P10
- Max-250+: R125P02-011
- Barbed Adapter with Tubing: R207P17
FEATURES
- Large LCD: Easy to read characters.
- Calibration Reminder: Reminds once a week.
- One-Touch Calibration: Auto calibrates to room air (20.9%) or 100% oxygen.
- On/Off Button: One-touch on and off.
- Patented Ergonomic Design: Fits comfortably in your hand.
- Rubber Gasket: Helps prevent moisture ingress.
Specifications
| Specification | Details |
|---|---|
| Measurement Range | 0 - 100% Oxygen |
| Display Resolution | 0.1% Oxygen |
| Warm-up Time | None Required |
| Operating Temperature Range | 15°C - 40°C (59°F - 104°F) |
| Operating Humidity Range | 0 - 95% RH non-condensing |
| Oxygen Measurement Accuracy | ±3% actual oxygen level over full operating temperature range |
| Sensor Connection | M16 x 1 Thread |
| Sensor Operating Life | >900,000 oxygen percent hours, minimum 2 years in typical applications |
| Maximum Storage Temperature Range | 15°C - 50°C (5°F - 122°F) |
| Optimal Storage Temperature Range | 5°C - 25°C (41°F - 77°F) |
| 90% Response Time | <15 seconds @ 23°C |
| Low-Battery Indicator | "BAT" icon displayed on LCD |
| Power Requirement | 2-AA Alkaline Batteries (2 x 1.5 Volts) |
| Calibration Reminder | One week timer started with every calibration, "CAL" icon displayed on LCD |
| Sensor Type | Maxtec MAX-250+ galvanic fuel cell |
| Total Weight | 0.4 lbs (170 grams) |
| Dimensions | 3.75" (tall) x 3.00" (wide) x 1.33" (thick) |
ML-0186 Rev G
For support, contact Maxtec at 800-748-5355 or visit maxtec.com.
