Manuals+

AUTOSLIDE

Mode & Sensor Port Guide

The AutoSlide uses four operating modes. Each mode is designed for a different type of application or method of opening/closing. You can tell which mode the unit is in and change the mode using the modepad located on the front of the control panel.

Control panel modepad showing icons for different modes: [circle-dot], [door-arrow], [no-entry], [paw-print], [asterisk].

Automatic Mode

Default mode for everyday ease and accessibility.

  • Door is unlocked
  • Power-assist enabled
  • Sensors/buttons on Inside and Outside channels enabled
  • Sensors/buttons on Pet and Stacker channels disabled
SensorStatus
Inside SensorEnabled, opens to full width
Outside SensorEnabled, opens to full width
Pet SensorDisabled, functions as safety sensor*
Stacker SensorDisabled

Hold Open Mode

Keeps the door fully open. Remotes connected to Stacker Sensor can start and stop the door like a garage door.

  • Door is locked when closed (w/ iLock Motor)
  • Power-assist disabled
  • Only sensors/buttons programmed to Stacker channel enabled
  • Sensors/buttons on Inside, Outside, and Pet channels disabled
SensorStatus
Inside SensorDisabled
Outside SensorDisabled
Pet SensorDisabled, functions as safety sensor
Stacker SensorEnabled, starts and stops the door

Secure Mode

Security-centered mode for locking the door.

  • Door is locked (w/ iLock Motor)
  • Power-assist disabled
  • Only sensors/buttons programmed to Inside Sensor channel enabled
  • Sensors/buttons on Outside, Pet, & Stacker channels disabled
SensorStatus
Inside SensorEnabled, opens to full width
Outside SensorDisabled
Pet SensorDisabled, functions as safety sensor
Stacker SensorDisabled

Pet Mode

Primary usage mode for humans with pets.

  • Door is locked (w/ iLock Motor)
  • Power-assist enabled
  • Sensors/buttons on Inside, Outside, and Pet channels enabled
  • Sensors/buttons on Stacker channel disabled
SensorStatus
Inside SensorEnabled, opens to full width
Outside SensorEnabled**, opens to full width
Pet SensorEnabled, opens to partial pet width
Stacker SensorDisabled

* In any mode but Pet Mode, the Pet Sensor is used for safety sensors: if the door is in the process of closing and Pet Sensor is triggered, the door will automatically reverse back open. Pet Sensor cannot open the door from fully closed when not in Pet Mode.

** The Outside Sensor in Pet Mode can be disabled by turning on DIP switch #4 in the unit's control panel.

Models: ATM2, Mode and Sensor, ATM2 Mode and Sensor

File Info : application/pdf, 1 Pages, 526.83KB

PDF preview unavailable. Download the PDF instead.

AutoSlide-ATM2-Guide

References

Microsoft: Print To PDF

Related Documents

Preview Autoslide RFID Sensor Operation Instructions and Setup Guide
Comprehensive guide to installing, configuring, and troubleshooting the Autoslide RFID Sensor system, including K9 Smart Pet Tags for automatic door operation.
Preview Autoslide M-229E Presence Curtain Sensor Operation Instructions
Operation instructions for the Autoslide M-229E Presence Curtain Sensor, detailing its features, installation, function settings, and technical specifications for automatic sliding doors.
Preview Autoslide AutoPlus Gateway Setup and LED Indicator Guide
This guide provides step-by-step instructions for setting up your Autoslide AutoPlus smart door gateway, understanding its LED indicators, and performing a factory reset. Learn how to connect the AutoPlus to your network and control your automatic doors via the Autoslide app.
Preview Autoslide Wireless Touch Button Switch User Manual
User manual for the Autoslide Wireless Touch Button Switch, detailing features, installation options, connection instructions, and technical specifications for automated door systems.