PETKIT Eversweep Max (Cordless) User Manual
Product List
- Lid
- Water Tank
- Filter Holder
- Filter Mesh
- Water Pump
- Wireless Water Pump Unit
- Control Module
- Stainless Steel Drinking Bowl
- Outlet Tube
- Power Cable
- Cleaning Brush
- User Manual
Product Components
- Upper Cover
- Locking Mechanism
- Main Unit
- Outlet Tube
- Filter Cartridge
- Wireless Water Pump Unit
- Power Cable
- Status Indicator Light
- Control Buttons
- Bottom of Control Module
- Recess for Power Cable
Product Installation
- Remove the stainless steel drinking bowl by opening the pop-lock clasp.
- Remove the upper cover and the filter holder.
- Place the water pump into its designated area and connect the outlet tube to the wireless water pump unit's outlet. Ensure the tube is not kinked.
- Place the lid, then the filter holder as shown, and insert the filter cartridge into its holder. (Rinse the filter before first use as per filter packaging instructions).
- Fill the water tank up to the MAX line.
- Insert point A of the water bowl under the main unit and secure the water bowl.
- Insert the control module vertically into the base. Installation is complete.
Operating Instructions
Use Scenarios
Plugin Operation
Remove the control module, open the bottom silicone plug, and insert the power cable into the power input on the bottom of the control module. Reinsert the control module vertically into the base. Press the button on the top of the main unit to switch between water dispensing modes.
Battery Operation
Take out the control module and plug the power cable into the connector to charge the battery. Water supply is not possible by default when using battery power. Battery life depends on the pump frequency; frequent pumping shortens battery life.
Indicator Light Description
- Fully charged: Solid blue light. Unplug the power cable once fully charged.
- Charging: Blinking blue or green light.
- Battery weak: Light blinks.
- Normal operation (continuous water dispensing): Green light stays on for 15 seconds and then turns off.
- Intermittent mode (intermittent water dispensing): Light flashes intermittently depending on the water dispensing mode.
- Water shortage: The water shortage indicator light flashes. This occurs when the water tank contains too little water.
- Failure: Indicator light flashes continuously blue and green. The control module needs to be replaced. After replacement, perform the reset procedure in the app. After reset, the indicator light will turn off.
- Filter indicator: When the control module is removed, the filter indicator lights up. When the module is reinstalled, the indicator light turns off.
App Smart Control
Download and install the "PETKIT" app from the App Store or Android App stores. Go to the "Home" page of the app, click "+", add the corresponding device, and follow the on-screen instructions to connect the device. The app allows you to set different water dispensing modes and monitor your pet's drinking status. The app also displays filter status and low water alerts.
Cleaning and Maintenance
The frequency of cleaning depends on your pet's behavior and water quality. To ensure healthy drinking water for your pet, it is recommended to clean the water tank and pump weekly. (Refer to Section 6.2 for a video on cleaning and maintenance).
Steps:
- Remove the control module and wireless components.
- Clean the water tank, stainless steel drinking bowl, and pump. Wipe them with a dry or slightly damp cloth. Do not immerse these components in water.
- Clean the filter holder and filter mesh.
Caution: The wireless base and control module cannot be soaked in water.
Video Tutorials
- Video for Installation and Use
- Maintenance and Cleaning Video
Basic Specifications
| Parameter | Specification |
|---|---|
| Model | PETKIT EVERSWEET MAX (CORDLESS) |
| Product Material | ABS, Stainless Steel |
| Capacity | 3L (101 oz) |
Note: Dimensions and Rated Power were not fully specified in the provided document excerpt.
Safety and Disposal
Safety Instructions
Please refer to the full user manual for detailed safety instructions.
Disposal Information
The European Directive 2012/19/CE concerning Waste Electrical and Electronic Equipment (WEEE) mandates that WEEE must not be disposed of with normal unsorted municipal waste. WEEE must be collected separately to minimize the impact on human health and the environment. The symbol of a "crossed-out wheeled bin" ?️ on the product serves as a reminder of your obligation to dispose of the equipment separately.
