Product/Process Change Notice - PCN 25_0151 Rev. -

This notice is to inform you of a change that will be made to certain ADI products (see Appendix A) that you may have purchased in the last 2 years. An acceptance or concern response should be submitted to ADI promptly. Any requests for samples of changed material or additional information must be made within 30 days of the notification. In accordance with JEDEC Standard 046, customers should acknowledge receipt of the PCN within 30 days of the PCN delivery. ADI contact information is listed below. Note: Revised fields are indicated by a red field name. See Appendix B for revision history.

Lack of acknowledgment of the PCN within 30 days constitutes acceptance of the change. After the acknowledgment, a lack of additional requests within 90 days constitutes acceptance of the change.

PCN Details

PCN Title: Qualification of Wafer Fabrication Site Analog Devices, Inc. Camas WA for (6um Bipolar) Products

Publication Date: 11-Aug-2025

Effectivity Date: 13-Nov-2025 (the earliest date that a customer could expect to receive changed material)

Revision Description: Initial Release.

Description Of Change

Qualification of Wafer Fabrication Site Analog Devices, Inc. Camas WA for 6um Bipolar Products.

Reason For Change

Leveraging the existing qualified process at our Analog Devices Camas, WA Fab ensures a reliable and continuous supply for our customers securing their needs well into the future.

The affected products will be manufactured using ADI specified manufacturing flows, materials, process controls, and monitors ensuring no degradation of quality and reliability performance.

Impact of the change (positive or negative) on fit, form, function & reliability

There is no expected impact to fit, form, function or reliability.

Product Identification

Traceability will be maintained via standard ADI lot traceability.

Summary of Supporting Information

Qualification has been performed per Industry Standard Test Methods. See attached Qualification Results Summary.

Supporting Documents

Attachment 1: Type: Qualification Results Summary

ADI_PCN_25_0151_Rev_-_Qualification of ADI Camas Wafer Fab 6um BIPOLAR Process.pdf

Note: If applicable, the device material declaration will be updated due to material change.

ADI Contact Information

For questions on this PCN, please send an email to the regional contacts below or contact your local ADI sales representatives.

• Americas: PCN_Americas@analog.com
• Europe: PCN_Europe@analog.com
• Japan: PCN_Japan@analog.com
• Korea: PCN_Korea@analog.com
• Rest of Asia: PCN_ROA@analog.com

Appendix A - Affected ADI Models

Appendix B - Revision History