MOEN

Showerhead Warranty: Lifetime Limited Warranty

Warranty Coverage

Moen products are manufactured to the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser who buys this product for use in their home, for as long as they own that home (the "Warranty Period" for homeowners), that this product will be free from defects in material and manufacturing workmanship during the coverage duration.

All other purchasers (including those for industrial, commercial, and business use) are warranted for a period of 5 years from the original date of purchase (the "Warranty Period" for non-homeowners). This warranty applies only to products purchased from Moen authorized resellers.

Because Moen cannot control the quality of products sold by unauthorized resellers, this warranty does not cover Moen products purchased from unauthorized resellers. Moen Incorporated will repair or replace the product free of charge, postage paid. For assistance, please contact Moen at 1-800-BUY-MOEN.

Limitation of Liability and Exclusion of Damages

To the extent permitted by law, Moen disclaims all other implied or express warranties, including warranties of merchantability and/or fitness for a particular purpose. This warranty is your sole remedy. Moen shall not be liable for any damages, whether direct, indirect, incidental, special, consequential, exemplary, or otherwise, including lost revenues and profits, arising from any theory of recovery, including statutory, contract, or tort.

Notwithstanding the term of any limited or implied warranty, or if a limited warranty fails of its essential purpose, Moen's entire liability will not exceed the purchase price of this product. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations or exclusions may not apply to you. This limited warranty provides specific legal rights, and you may also have other rights that vary by state and province.

Care and Cleaning

To preserve the finish of Moen products and accessories, periodic care is recommended. Clean your new Moen product with a mild soap, rinse thoroughly with warm water, and dry with a clean, soft cloth. Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, or solvents, as these may damage the finish. Failure to comply with these cleaning instructions may void Moen's warranty.

Installation Requirements

Install this product with a certified backflow preventer, installed at the shower hose inlet, as required by the local plumbing code. The backflow preventer shall be installed per the manufacturer's installation instructions. Consult a plumbing professional for backflow preventers and local plumbing code requirements.

Third party certified to ASME A112.18.1/CSA B125.1 INS1294.

Company Information

Moen Incorporated
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022

PDF preview unavailable. Download the PDF instead.

7c0334a6-af18-4fae-98a3-426eb7b0c0a2

Related Documents

Preview Moen S1311 Series 9" Two Function Rainshower Specifications
Detailed specifications for the Moen S1311 Series 9-inch two-function rainshower, including features, operation, flow rates, standards, and warranty information. Learn about its metal construction, brass swivel ball assembly, and WaterSense certification.
Preview Moen Colinet Single Handle Floor Mounted Tub Filler Faucet - Model S44507 Series
Detailed specifications and installation information for the Moen Colinet Single Handle Floor Mounted Tub Filler Faucet, Model S44507 series. Features include metal construction, single function handheld shower, 59" double interlock spiral hose, and integral dual check valves. Complies with WaterSense and ASME standards.
Preview Moen Weymouth Widespread Lavatory Faucet Installation and Specifications
Detailed information on the Moen Weymouth Widespread Lavatory Faucet, including installation, operation, flow rates, cartridge specifications, standards compliance, and warranty. Features Duralock quick connect and metal construction.
Preview Moen T90331 Series Bath Waste Specifications
Detailed specifications for the Moen T90331 series bath waste, including features, standards, warranty, and critical dimensions. This push-to-close, pull-to-drain bath waste is constructed with all metal trim and fits 1-1/2" threaded drains.
Preview Moen Waterhill S711 Series Single-Handle Kitchen Faucet Specifications
Detailed specifications for the Moen Waterhill Single-Handle Kitchen Faucet, Model S711 series, including features, operation, flow rate, cartridge, standards, warranty, and critical dimensions.
Preview Moen Weymouth Single Handle Pre-Rinse Spring Pulldown Kitchen Faucet Specifications
Detailed specifications for the Moen Weymouth Single Handle Pre-Rinse Spring Pulldown Kitchen Faucet (Model Series S73104EW), covering features, operation, flow, cartridge, standards, warranty, and installation dimensions.
Preview Moen 3887 Series Single Function Handshower w/Slide Bar Specifications
Detailed specifications for the Moen 3887 series single function handshower with slide bar, including features, flow rates, standards compliance, and warranty information.
Preview Moen Single Function Handshower w/Slide Bar Specifications
Detailed specifications for the Moen 3887 series single function handshower with slide bar, including features, flow rates, standards compliance, warranty information, and critical installation dimensions.